SERIES
Luminary solution for
Street lighting
From 1,100 lm up to 27,300 lm
The E LUM LED light is a high-tech light, which can be used for lighting of all kinds of streets, parking lots as
well as other public and private outdoor areas. The modern, extremely thin aerodynamic design integrates very
well into urban space. It is made of modern high-tech materials, which are tested in the automotive and medical
industry. The modular concept enables a fast and efficient upgrade of the light with more efficient components
as well as an ecological degradation after the end of its lifetime. The upper supporting part of the light and
the rotor are made of a qualitative lightweight aluminium. They are protected by a thin powder coating, which
ensures the protection of metal against oxidation even in the harshest weather and climate conditions. The
lower cover is made of qualitative ASA plastic, which is known for its long lifetime in environments with fast,
frequent and significant changes in temperature. The light is designed in such way that it ensures natural air
circulation and therefore exceptional heat transfer, which is very important for a long lifetime. The surface that is
big enough and is a result of the cooling fins on the upper part of the light enables an excellent heat transfer also
at high ambient temperatures greater than 50°C. With the help of the FIPFG (“formed-in-place”) technology that
guarantees the formation of the seal on the sealing spot we have achieved a high permanent IP66 protection
which does not yield, not even in case of possible upgrade work on the light.
ELUM | technical information
Separated LED and powering part
ASA plastic, UV-resistant
Easy access for maintenance
Valve against clouded glass and lenses
Horizontal bottom surface against
light pollution
Coating against
dazzling
Scale for tilting angle adjustment
Anti glare glass
Stainless steel screws
Safe fixing to a pole with
four screws
Integrated foam
seal
Easily adjustable angle 0-90⁰
Powder coating
Various optics
Thermal conductive foil
Self-cleaning profile
Aerodynamic design
Big surface for heat transfer
2
High-pressure injected AL
LUMINARY configuration
E LUM series offers you three different packages. With these three variations, you can chose optimal products
according to your requirements and price level.
E LUM SERIES
ECONOMY
STANDARD
PREMIUM
- efficacy up to 96 lm/W
- efficacy up to 112 lm/W
- overheat protection
- power reduction; flexible
luminous flux
- time-dependent luminous flux
controll
- constant luminous flux-CLO
- multiple optics
- different CCT avaliable
- Control: DALI, 1-10 V, RF
- optional surge protection
- efficacy up to 125 lm/W
- overheat protection
- power reduction; flexible
luminous flux
- time-dependent luminous flux
controll
- constant luminous flux-CLO
- multiple optics
- different CCT avaliable
- Control: DALI, 1-10 V, RF
- C LUM controll
- Surge protection
SERIES
E LUM 1
E LUM 2
E LUM ECONOMY
E LUM STANDARD
E LUM PREMIUM
LED
POWER [W]
LIGHT FLUX UP
TO [lm]
POWER [W]
LIGHT FLUX UP
TO [lm]
POWER [W]
LIGHT FLUX UP
TO [lm]
8
15
1,450
15
1,450
10
1,100
12
30
2,850
15 - 30
2,850
15 - 30
1,800 - 3,315
24
60
6,000
30 - 80
3,300 - 8,400
30 - 80
3,300 - 8,400
48
/
/
80 - 120
8,490 - 11,450
80 - 120
9,600 - 14,000
64
/
/
80 - 140
/
100 - 140
12,500 - 16,780
80
/
/
95 - 140
10,500 - 14,900
95 - 140
12,000 - 17,000
96
/
/
160 - 190
16,940 - 19,350
160 - 220
18,400 - 27,300
3
OPTIC
Koda
Ime
Koda
Ime
Since we are aware of the fact that a safe and qualitative light distribution requires a secondary lens, we have
paid special attention to this component. We enable a wide selection of different optics to reach an optimal
light distribution in each case. The lenses are made of pmma, a material that is UV-resistant and does not
turn yellow throughout its whole lifetime. Special glass neutralizes the glare effect and protects the lenses
against harmful environmental impacts, which can be the result of exhaust gases, sand storms in the desert,
acid rain and vandalism. The inner part of the light is composed of colour shades that guarantee the highest
recuperation of light, which reflects from the glass. With the Gore-Tex valve, we ensure the air exchange, which
is very important for preventing the condensation effect without threatening the IP protection.
32.080.000
ELUM
Koda
Ime
32.080.001
ELUM
LRF 2013/018
ELUM
Koda
Ime
LRF 2013/014
ELUM
Tok naprave
7114.46 lm
Moč svetila
Sve. tok sijalke
7115.00 lm
Maksimalna vrednost 891.81 cd/klm
80.00 W
Učinkovitost
Pozicija
88.93 lm/W
C=30.00 G=42.50
840mm x 400mm
Izkoristek Tok naprave
99.99%
6533.01 lm
Moč svetila
CG Asimetrična
Sve. tok sijalke
6535.00 lm
Maksimalna vrednost 481.33 cd/klm
Polravnina C
90
76.90 W
Učinkovitost
Pozicija
84.95 lm/W
180.0
0.0
270.0
90.0
99.97%
CG Asimetrična
Polravnina C
90
0
Izkoristek
C=150.00 G=62.50
840mm x 400mm
180.0
0.0
270.0
90.0
90
180
270
270
105°
105°
90°
90°
75°
75°
60°
60°
90°
150
75°
300
60°
180°
120°
150
105°
120°
80
105°
105°
90°
90°
75°
75°
60°
60°
80
160
450
180°
150
240
48.080.100
ELUM
Koda
Ime
ELUM 48.80.101
ELUM2
Koda
45°
Ime
LRF 2013/016
45°
ELUM
Koda
45°
Ime
ELUM2
45°48_80_101
ELUM2
80.00 W
600
Moč svetila
Maksimalna vrednost 578.02 cd/klm
Učinkovitost
Pozicija
91.86 lm/W
C=15.00 G=65.00
840mm x 400mm
Polravnina C
750
30°
90
15°
180.0
15°
270.0
0°
8031.53 lm
Moč svetila
Sve. tok sijalke
CG Asimetrična
8032.00 lm
Maksimalna vrednost 971.58 cd/klm
30°
90.0
OPTICS 000; Suitable for high Installation,
bigger distance between poles and parking
spaces.
(c)OxyTech Srl 180
www.oxytech.it
LITESTAR
48.120.110
ELUM2
Koda
Ime
ELUM2 48
ELUM2
Tok naprave
45°
Sve. tok sijalke
Moč svetila
11760.00 lm
Maksimalna vrednost 424.37 cd/klm
120.00 W
600
Učinkovitost
Pozicija
97.99 lm/W
C=60.00 G=65.00
30°
90.0
90°
90°
75°
75°
60°
60°
250
500
Polravnina C
15°
0°
Izkoristek
99.99%
270.0
99.99%
CG Asimetrična
cd/klm
0.0
15°
30°
90.0
OPTICS 002; Suitable for narrower roadways, access roads, cycling and pedestrian
areas.
0
Stran 1
180
270
180°
105°
105°
90°
90°
75°
75°
60°
60°
45°
45°
120°
250
105°
90°
250
75°
500
60°
750
45°
45°
Izkoristek
180.0
90
120°
250
100.37 lm/W
C=90.00 G=47.50
45°
1000
1000
CG Asimetrična
Polravnina C
15°
cd/klm0.0
180.0
750
90
270.0
15°
0°
30°
30°
0
OPTICS 010; Suitable for bigger distance
between poles and high mounting installation. Higher uniformity factor.
(c)OxyTech Srl www.oxytech.it
LITESTAR
0°
15°
30°
OPTICS 100; Suitable for parking spaces
and pedestrian crossing.
cd/klm
1250
30°
LITESTAR
15°
0°
15°
30°
OPTICS 101; Suitable for parking spaces.
Small distance between poles.
Stran 1
(c)OxyTech
Srl www.oxytech.it
Stran 1
120°
150
105°
15°
(c)OxyTech
Srl www.oxytech.it
Stran
1
270
180°
cd/klm
1250
90.0
180
LITESTAR
30°
Pozicija
750
0.0
15°
270.0
Učinkovitost
970mm x 400mm
cd/klm
180.0
80.00 W
750
970mm x 400mm
30°
Maksimalna vrednost 988.39 cd/klm
180°
450
11759.10 lm
Moč svetila
8030.00 lm
OPTICS 001; Suitable for wider roadways
and smaller distance between poles and
parking spaces.
105°
300
Koda
Ime
0°
8029.45 lm
CG Asimetrična
Sve. tok sijalke
Stran
(c)OxyTech
1
Srl 180
www.oxytech.it
105°
150
60°
15°
120°
90°
75°
90
45°
600
IzkoristekTok naprave99.99%
270
150
105°
104.71 lm/W
C=0.00 G=0.00
0
270
180°
Pozicija
Polravnina C
400
0.0
30°
Učinkovitost
840mm x 400mm
cd/klm
0
LITESTAR
76.70 W 320
Izkoristek Tok naprave
99.99%
60°
450
Koda
Ime
LRF45°
2012/019
ELUM 32.080.010
7350.00 lm
75°
300
32.080.010
ELUM 32.080.010
7348.93 lm
105°
90°
Koda
Ime
Sve. tok sijalke
120°
150
Koda
Ime
Tok naprave
90.0
180
270
180°
0.0
270.0
0
0
180
180.0
105°
90°
90°
150
75°
75°
300
60°
60°
450
45°
45°
600
LITESTAR
4
15°
With tuneable lumen package, tilt adjustment and wide range of optics
E LUM can match the variety of ME/ S lighting classes and road/street
geometries individually.
cd/klm
750
30°
0°
15°
30°
OPTICS 110; Suitable for wide roadways,
parking spaces. Smaller distance between
poles.
(c)OxyTech Srl www.oxytech.it
Stran 1
Lighting classes
S1
S2
S3
S4
S5
S6
E LUM 1
1,100 lm – 8,000 lm
x
x
x
x
x
x
E LUM 2
8,000 lm – 24,000 lm
x
x
ME1 ME2
x
x
ME3a
x
ME3b
ME3c
ME4a
ME4b
ME5
ME6
x
x
x
x
x
x
x
x
x
x
x
x
E LUM FEATURES
EATURES
CLO - CONSTANT LIGHT OUTPUT
ight Output
All light sources experience lumen depreciation - a reduction in light output over time. To ensure the minimum
levels in an installation,
periencerequired
lumenlightdepreciation
- a most lighting designs are calculated based on the light level at the end of the
lamp’s
useful
life
(normally
the
L70
utput over time. To ensure thepoint: 70% of the initial lumens). This means that the system consumes more
power than necessary, wasting, on average, as much as 15% of energy during its lifetime. The Constant Light Output
ght levels in an installation, most
(CLO) functionality compensates
calculated
based on the light level
for this light loss, ensuring that
on
- a
both HID lamps and LEDs will
useful
re thelife (normally the L70 point:
always deliver the necessary light
mens).
, mostThismeans that the system
level. By taking into account the
wer
than
necessary,
wasting
as
lumen depreciation, the driver
t level
can be programmed to start at a
rgy
on average during its lifetime.
point:
dimmed level for a new luminaire
ht
Output (CLO) functionality
ystem
and gradually increase power over
light
loss,
ensuring
that
both
HID
ng as
the life of the light source, saving
always
deliver
the
necessary
light
level.
By
taking
into
account
the
lumen
the
energy
and depreciation,
extending the lifetime
of
etime.
system. power over the
mmed
onalityto start at a dimmed level for a new luminaire and graduallytheincrease
e, saving
th
HID energy and extending the lifetime of the system.
light level. By taking into account the lumen depreciation, the
functionality
nctionality
evel for aDYNADIMMER
newprovides
luminairemulti-step
and
gradually increase power over the
provides
multi-step
dimming.
The
nation
of
five
flexible
dim
periods
ing the lifetime
of
the
system.
combination of five flexible dim
es it easyperiods
to customize
a virtually
and dim levels makes it
mming
Any level
can
be
easy to customize
a virtually
endless
ti-step profiles.
of dimming
Any level
duration,arraymaking
it profiles.
possible
to
eriods
can be configured for any duration,
t levels in the middle of the night,
rtually
making it possible to provide very
times
and
anything
in middle
between
levels in the
of the
an be low light
onal
periods.
All
Dynadimmer
night,
high
levels
at
peak
times
and
ble to
anything in on
between
during
the
dnight,
on the system’s
and off
times.
transitional periods. All Dynadimmer
f the dimming
schedule can be
tween
schedules work based on the system’s on and off times. The configuration of the dimming schedule can be done
or
even after
products
have
been installed.
before,the
during
or even after
the products
have been installed.
mmer
times.
MODULE TEMPERATURE PROTECTION manages
an be
excessive
of the LED
PCBOR
board.
V CONTINUOUS DIMMING
VIAtemperatures
ANALOG CONTROL
SIGNAL
DALIHigh
ave been1-10
installed.
negatively
impacts
the1-10
useful
life aofminimum
the LEDs,
and
The 100% light level is determined byheat
the output
current level
of the driver.
V allows
dim level
of
10% subject to the absolute minimumincreases
current possible
for
each
driver.
When
dimming
via
integrated
Dynadimmer,
maintenance
costs. MTP feature manages
MODULE
TEMPERATURE PROTECTION
manages
1-10 V can be used to override the Dynadimmer schedule whenever necessary (e.g. via central switch or presence
PCB
temperature
by regulating
the output current of
excessive
ofapplication
the LED
PCB
board.
detector; seetemperatures
Dynadimmer override
note).
Diming
is alsoHigh
possible via DALI command lines, according
driver.
When
the LED
to technical
standardimpacts
IEC 62386.thethe
heat
negatively
useful
life of
the LEDs,
andboard temperature rises to
a critical
level, themanages
MTP will first dim down and then
increases maintenance costs.
MTP feature
completely
turn current
off the light
PCB temperature by regulating
the output
of engine. The system will
be turned
back on rises
whentothe LEDs cool down below
the driver. When the LED board
temperature
P protects
LED life
during
or temporary
a critical
level,
the occasional
MTP will first
dim downheat
and spikes,
then e.g. a sunny day with the
hed off.completely turn off the light engine. The system will
be turned back on when the LEDs cool down below
uS
dimming
Via anaLOg
COntrOL
ccasional or temporary
heat spikes,
e.g. aSignaL
sunny day with the
l is determined by the output current level of the driver. 1-10V allows a minimum dim
5
provide very low light levels in the middle of the night,
high levels at peak times and anything in between
during the transitional periods. All Dynadimmer
schedules work based on the system’s on and off times.
MODULE TEMPERATURE
PROTECTION
excessive
temperatures
of the can
LED PCB
The
configurationmanages
of the
dimming
schedule
be
board. High heat negatively affects the useful life of the LEDs, and increases maintenance costs. MTP feature
done before, during or even after the products have been install
manages PCB temperature by regulating the output current of the driver. When the LED board temperature rises
to a critical level, the MTP will first
dim down and then completely
turn off the light engine. The
system will be turned back on
when the LEDs cool down below
the critical level. MTP protects
LED life during occasional or
temporary heat spikes, e.g. a
sunny day with the installation
not switched off.
MODUL
excessiv
heat neg
increase
PCB tem
the driv
a critica
complet
be turne
E LUM ACCESSORIES the critical level. MTP protects LED life during occasional or tem
installation not switched off.
SPD
LED street lighting is now widely used for its efficiency, energy cost savings and life expectancy. Nevertheless,
this
attractive
technology has an
important weakness:
its sensitivity
to
1-10V
COntinuOuS
dimming
Via anaLOg
COntrOL
S
transient
voltageslight
created
by lightning
or by power switch
operations
AC
The 100%
level
is determined
by the
outputon current
leve
network. Due to its scattered and over-exposed location, LED lighting system
level of 10% subject to the absolute minimum current possible
will face induced surges which will create failure of its power supply, damage
1-10
be used
to override
the Dynadimmer
of Dynadimmer,
LED components or
loss V
of can
the lighting
efficiency.
For these reasons,
the
use
of relevant
surge protectors
located upstream
the LED lighting
systems applicati
switch
or presence
detector;
see Dynadimmer
override
is highly recommended. LUMENIA provides a set of surge protectors to be
installed at different locations of the outdoor lighting network, such as the
DALI is the acronym for Digital Addressable Lighting Interfac
luminaires, street lighting pole box and street cabinets.
lighting management system that provides maximum control an
DALI is not a single feature. It is a standard industry protoc
(ballasts, control systems, sensors, controllers, switches, etc.) f
C LUM
matched together seamlessly into complete systems. With DA
C LUM enables remote control and
improved vs. conventional, proprietary systems.
monitoring of lights to reduce energy
and maintenance costs. C LUM is
an integrated solution-level wireless
system that is easy to implement into
E LUM lamps fitted with dimming
control. A C LUM RF module is fitted
to each lamp and communicates via
C-Net, a sub 1 GHz mesh network.
The C LUM enables lamps to connect
to a Data Concentrator Unit (DCU) to
support the two way communication
to lamps via the Lighting Server,
controlled
from
WebView,
a
Graphical User Interface. In addition
to C LUM solution, Lumenia Smart
Street Lighting Control (SSLC)
system enaibles management of
street lighting with help of Power Line
Communication (PLC) through the
existing power cable connections.
18
6
Nema socket and ligHt sensor
PRODUCT DETAILS:
Light-Control Sensors
Photocell Sensors For Lamp
SPECIFICATIONS:
Power Source: 110 - 240 V/AC
Rated Load: 10 A
Power Frequency: 50/60 Hz
Ambient Light: < 5 lux - 15 lux
TECHNICAL DATA
Lifetime
L80B10 > 65,000 hours (Economy & Standard E LUM)
L80B10 > 300,000 hours (Premium E LUM)
Operating temperature
-40°C +55°C
Supply voltage
220 – 240 Vac 50 ÷ 60 Hz
Electrical power
E LUM 1: from 15 to 80 W
E LUM 2: from 80 to 220 W
Power factor
> 0.96
CCT
4,000 – 4,500 K; 4 Step McAdam (6,000 K or 3,800 K upon request)
Factor of colour rendering
(CRI): ≥ 70
Surge protection
4 kV (class II); 10 kV (class I)
Max. area exposed to the wind
E LUM 1: 0,0552 m²
E LUM 2: 0,0862 m²
Protection class
IP 66; IK 09
Certificates
IEC 60529:2001; EN 60598-1 :2008, cI.9.2.2 and 9.2.7; IEC 60598-2-3 (Third edition):2002
+ A1:2011 used in conjunction with IEC 60598-1 (Seventh edition): 2008; IEC 6059826:1994+A1:1996 used in conjunction with IEC 60598-1:2008; EC 62031:2008 (First edition);
CE; ENEC; ZIK
Guarantee
10 years on mechanical and 5 years on electrical parts
Wireless control
optional
Installation height
3.5 to 16 meters
Dimensions
E LUM 1
E LUM 2
7
INSTALLATION
The rotor enables a direct installation from the side or
on the top of the pole (90°), with possible regulation of
the light angle 0 - 90° with the step of ± 5° (for poles
or bearers with 60 mm in outer diameter). The security
system inside the rotor prevents from an unintentional
tilt during the regulation phase and a possible damage
that could occur during the disassembly or installation
of the light. Special attention was paid to the mounting
of the light to the pole, since it is mounted with four
screws, according to the strictest international rules
and recommendations.
LUMENIA d.o.o., Breg pri Litiji 50,
1270 Litija, Slovenia, Europe
[email protected] www.lumenia.com
tel: +386 1 890 00 57
February 2016
Mounting pole: Ф60 mm (possible adapter use for other
dimensions)
Tilt: 0 - 90°, step ± 5°
Weight: E LUM 1: 7 kg; E LUM 2: 15 kg