n.vision verify
PCB repair and veri cation station
Inkjet | Laser | Automation | Made in Germany
Product Specification
Advantages
• Compatible with SHIRAI Visper 300 and 700 series
• Up to 330 mm × 250 mm PCB formats
• User interface matches SHIRAI Visper Repair System (VRS) -> Minimal training required
• Accelerated sub panel defect recognition: Skip over positions on already identi ed defective sub panels
• Support of double sided panel inspection
• Easy and fast setup of inspection recipes
• User level management
• Ergonomically designed
• Customizable stand-alone key pad
• NIKON high resolution precision stereoscopic microscope with zoom body for visual inspection
• Ef cient white LED ring light
• Optional CCD camera with real time computer vision
• Laser pointer for easy identi cation of sub panels identi ed defective
• Low maintenance due to precision linear motor drive x-y stage
Speci cations are subject to change without notice - 28/06/2013
Technical Data
Substrate size
Substrate height
Substrate xture
330 x 250 mm (larger on request)
Up to 10 mm
Hard stop & optional vacuum hold down
Stage
Dimensions
Repeatability < 10 micron
(w) 1200 x (d) 950 mm x (h) 1700 mm
Electrical interface
User Interface
Display
230 V / 400VA, transformer included if necessary
Intuitive GUI, matches SHIRAI Visper Repair System (VRS)
24”wide screen TFT
Microscope
Optional camera
NIKON high resolution precision stereoscopic microscope
Color CCD, better than 5 micron resolution
Notion Systems GmbH • Robert-Bosch-Str. 3-5 • 68723 Schwetzingen • Germany
www.notion-systems.com • [email protected] • 3 +49 6202 57877- 0 • 5 +49 6202 57877- 99