Technical data sheet
EN-35 C/D
ENDURA
TRN
Single lever cartridge
Standard 35mm
08EN35L4501
Technical specifications
Nut torque/Pitch M1,5
10 - 12 N.m
Opening angle
25º
Rotation angle
90º
Working pressure (recommended)
1 – 5 bar
Burst pressure
>50 bar
Life cycle
175,000 cycles
1,000,000 cycles
140,000 cycles
EN-817 NF U3
(x2) ASME 112.18.1 M
(x2) GB18145
Sensitivity(r=45 mm.)
11º angle
Fidelity
<5 ºC
Constant 63ºC & 50°C
(6 l/min-3 l/min)
< 4°C – < 6ºC
Max. Hot water
90 ºC
Max. Hot water recommended
60 – 65 ºC
Flow
Sensitivity
Flow rate at 3 bar
Free flow
27,7 l/min
C-Restrictor
20,8 l/min
Noise level (C-Restrictor)
22 ± 2 dB(A)
(1)
Operation torque (3 bar)
Open – close
0,20÷0,35 Nm
Turn left-right
0,20÷0,35 Nm
(1)
Measured with Sedal’s faucet
www.sedal.com
TDS08EN35L4501 VER: 7 LANG: EN DATE: 2017-01-17
Technical data sheet
Single lever cartridge Standard 35mm
EN-35 C/D
ENDURA
TRN
Technical dimensions
Machining prescription
(2)
Dimensions of the cartridge assembled into the faucet (without vertical gap between the cover and the base)
www.sedal.com
TDS08EN35L4501 VER: 7 LANG: EN DATE: 2017-01-17