Joint Conference
2016 International Conference on Mechanical Design
and Control Engineering (MDCE2016)
2016 International Conference on Energy and
Mechanical Engineering (EME2016)
2016 年机械设计与控制工程国际会议
2016 年能源与机械工程国际会议
November 19-20, 2016
Wuhan, Hubei, China
MDCE2016 & EME2016
Program Book
Organizer:
Publisher:
SCHEDUAL OF THE CONFERENCE
Saturday, November 19th, 2016
10:00-16:30
Conference Registration, Joyiee Holiday Hotel, Wuhan, Hubei, China
Sunday, November 20th, 2016
9:00-9:10
Opening Ceremony, 22F Conference Room (22楼会议室)
9:10-09:50
Keynote Speech
09:50-10:00
Tea Break
10:00-11:20
Keynote Speech
11:20-12:00
Oral Presentation
12:00-14:00
Lunch, 3F Holiday Restaurant (3 楼假日餐厅)
14:00-14:40
Oral Presentation
14:40-15:00
Tea Break
15:00-17:00
Oral Presentation
KEYNOTE SPEECH
Keynote Speaker
Prof. Pengsheng Wei
National Sun Yat-Sen University, Kaohsiung, Taiwan
Title: Mechanisms for Manufacturing Defects
Abstract. This presentation analyzes (1) rippling and humping, (2) pore formation, and (3) spiking,
which are especially encountered in melting or welding. Rippling, humping, spiking, and porosity
seriously reduce properties of the joint and products after solidification in manufacturing and
materials technologies. On the other hand, surface roughness can be used to excite surface plasmon,
enhancing efficiency of LED, medical detectors, and solar cells, etc. Porosity can be applied in
fabricating functional materials to manipulate mass, momentum and energy transport. In view of
their practical and academic importance, we measure, analyze and confirm mechanisms of these
phenomena. Controlling of them becomes achievable.
Prof. Wei has published more than 80 journal papers, given keynote or invited speeches in
international conferences more than 50 times. He is a Fellow of AWS (2007), and a Fellow of ASME
(2000). He also received the Outstanding Research Achievement Awards from both the National
Science Council (2004), and NSYSU (1991, 2001, 2004), the Outstanding Scholar Research Project
Winner Award from National Science Council (2008), the Adams Memorial Membership Award
from AWS (2008), the Warren F. Savage Memorial Award from AWS (2012), and the William
Irrgang Memorial Award from AWS (2014). He has been the Xi-Wan Chair Professor of NSYSU
since 2009, and Invited Distinguished Professor in the Beijing University of Technology, China,
during 2015-2017.
KEYNOTE SPEECH
Keynote Speaker
Dr. Ahmed Chemori
Centre National De La Recherche Scientifique, France
Title: Control of Parallel Robots for Extremely Fast Operations
Abstract. Serial robots consist of sequentially connected links forming an open kinematic chain.
These robots are characterized by their large workspace and their high dexterity. However, it is
known that in order to perform tasks which require high acceleration and high precision; such robots
are not recommended because of their lack of stiffness and accuracy.
In order to deal with this issue, parallel kinematic manipulators (PKMs) robots are more
suitable. The main idea of their mechanical structure consists in using at least two kinematic chains
of links to support (the fixed base) the end-effector (travelling plate), each of these chains containing
at least one actuator. This allows for a distribution of the load between the chains. PKMs have
important advantages in terms of stiffness, speed, accuracy and payload with respect to their serial
counterparts. When interested in high speed robotized repetitive applications such as food packaging,
the key idea relies in looking for short cycle times. This means obviously to look for a short motion
time, as well as a stabilization time as short as possible, while guaranteeing the robustness and
performance with respect to disturbances and changes in operational conditions. This talk will give
an overview of some control solutions for high-speed applications in PKMs. The proposed solutions
are mainly based on adaptive control techniques and have been validated through real-time
experiments on different PKM prototypes.
KEYNOTE SPEECH
Keynote Speaker
Dr. Xingjian Jing
The Hong Kong Polytechnic University, Hong Kong, China
Title: The X-shaped Structure and Applications
Dr. Xingjian Jing received the B.S. degree from Zhejiang University, Hangzhou, China, in 1998,
the M.S. degree and PhD degree in Robotics from Shenyang Institute of Automation, Chinese
Academy of Sciences, Shenyang, China, in 2001 and 2005 respectively. He achieved the PhD degree
in nonlinear systems and signal processing from the Department of Automatic Control and Systems
Engineering, University of Sheffield, Sheffield, U.K., in 2008.
He is now an Associate Professor with the Department of Mechanical Engineering, the Hong
Kong Polytechnic University (PolyU) even since July 2015. Before joining in PolyU as an Assistant
Professor in Nov 2009, he was a Research Fellow with the Institute of Sound and Vibration Research,
University of Southampton, working on biological signal processing.
His current research interests include: Bio-inspired systems and approaches; Robotic systems
and control; Nonlinear dynamics, vibration, control; Sensor technology; Energy harvesting;
Nonlinear fault diagnosis or information processing, etc.
Dr Jing is an active reviewer for many known journals and conferences. He currently severs as
an Associate Editor of IEEE/ASME Trans. on Mechatronics, an Associate Editor of Mechanical
Systems and Signal Processing, and also as editorial board members of several other international
journals.
ORAL PRESENTATION OVERVIEW
ID
Paper ID
Title
1
M016
Design, Analysis and Test on Cutting Test Bench of Ramie Stalk
2
M028
Study on X60 Micro Alloy Steel’s Solidification Characteristics
Based on Linear Contraction-thermal Stress Measuring
3
M027
Cracking Failure Analysis of T-type Welded Tee in Waste Heat
Boiler
4
EME1281
Research on the Voltage of Hybrid Energy Storage System in
Electric Vehicles Charging
5
EME1266
The Experimental Study of Heating
Prefabricated Solar Heat Collection Plates
6
EME1269
Preparation of Biomass Derived Porous Carbon: Application for
Methane Energy Storage
7
EME1259
Design of the Hydraulic System for the Rise-fall Device in
Power Catwalk
8
EME1291
Parameter Driven Modeling of Planar Double-enveloping Toroid
Worm Pair
System
with the
POSTER PRESENTATION OVERVIEW
ID
Paper ID
Title
1
M015
On the Inter-partition PID Control Algorithm of Variable Mass
Pitching Systems
2
M014
Study on the Weak Parametrically Excited Mathieu Stability of
Submerged Monitoring Platform
3
M008
Automobile Engine Compartment Parameters Optimization Based
on CFD Simulation
4
M006
Migration of Conventional Model Transfer Format on Additive
Manufacturing
5
M011
Research on Dynamic Properties of Crane Boom under the
Condition of Accidental Unloading
6
EME1262
Exergy Destruction Analysis about S-CO2 Power Cycle Applied in
Marine Engine Heat Recovery System
7
EME1251
Modeling and Study of Fracture and Delamination in a Packaging
Laminate
8
EME1261
A Numerical Simulation
Pre-cooling Process
9
EME1274
Survey on Rural Household Energy Consumption-Based on the
Perspective of Poverty Alleviation in Hebei Province
10
EME1287
Punch Flanging Technology for Aluminium Alloy Plate-wheels
Rolled Lip Forming
of
Lng
Low-temperature
Pipe
Sunday, November 20th, 2016
Plenary Session
Conference Room-22F, Conference Room (22 楼会议室)
Lunch-3F, Holiday Restaurant (3 楼假日餐厅)
9:00-9:10 Opening Ceremony
9:10-9:50 Keynote Speech
Prof. Pengsheng Wei
Title: Mechanisms for Manufacturing Defects
09:50-10:00 Tea Break
10:00-11:20 Keynote Speech
Dr. Ahmed Chemori
Title: Control of Parallel Robots for Extremely Fast Operations
Dr. Xingjian Jing
Title: The X-shaped Structure and Applications
11:20-12:00 Oral Presentation
12:00-14:00 Lunch
3F, Holiday Restaurant (3 楼假日餐厅)
14:00-14:40 Oral Presentation
14:40-15:00 Tea Break
15:00-17:00 Oral Presentation
ORAL PRESENTATION
Design, Analysis and Test on Cutting Test Bench of Ramie Stalk (M016)
Cheng Shen, Qiao-Min Chen, Xian-Wang Li, Kun-Peng Tian, Ji-Cheng Huang, Bin Zhang
Cracking Failure Analysis of T-type Welded Tee in Waste Heat Boiler (M027)
Zhen Chen, Xue-Qing Liu, Kui Wang, Lu-Yi Lu
Study on X60 Micro Alloy Steel’s Solidification Characteristics
Contraction-thermal Stress Measuring (M028)
Yu-Yuan Zhu, Qian-Kun Yang , Jian-Xun Fu, Hong-Gang Zhong, Qi-Jie Zhai
Based
on
Linear
Research on the Voltage of Hybrid Energy Storage System in Electric Vehicles Charging (EME1281)
Kai Li, Xiang-Qun Chen, Jing-Bo Li, He-Qing Zeng, Lei Yang
The Experimental Study of Heating System with the Prefabricated Solar Heat Collection Plates
(EME1266)
Zhi-Guo Duan, Li-Quan Yang, Qi Wang, Bo-Wen Li, Xue Zhao, Miao Yu
Preparation of Biomass Derived Porous Carbon: Application for Methane Energy Storage
(EME1269)
Preparation of biomass derived porous carbon: application for methane energy storage
Design of the Hydraulic System for the Rise-fall Device in Power Catwalk (EME1259)
Ping Yu, Si-Jie Kang, Yan-Jiao Li, En-Chao Jin
Parameter Driven Modeling of Planar Double-enveloping Toroid Worm Pair (EME1291)
Zhi Liu, Hong Lu, Guo-Ming Yu
CONFERENCE MAP GUIDE
All presentations and activities will be held at Joyiee Holiday Hotel, Wuhan
Address: No.45 South Zhuodaoquan Road, Wuhan, Hubei, China
Mobile for Reservation: 027-87051888 Ext. 8824
E-mail for Reservation: [email protected]
本次联合会议将于 11 月 19-20 日在武汉卓悦假日酒店举行
酒店地址：中国湖北省武汉市洪山区卓刀泉南路 45 号
酒店订房电话：027-87051888 转 8824
酒店订房邮箱：[email protected]
Conference Secretariat
Any question about the conference, please contact the conference secretary at
+(86)15342346014 (MDCE2016) or +(86)15377564464 (EME2016).