CLAIND GAS GENERATOR PRODUCTS
CO2 PURIFIER
PRODUCT DESCRIPTION:
CO2 purifiers are designed to reduce the level of CO2 and moisture from a compressed air external supply. CO2 purifiers
can be used with a number of different applications including FT-IR Spectrometry, TOC analysers, GC analysers, NMR,
lasers, and electronic microscopy.
The CryoService range of CO2 purifier generators provides a genuine alternative to gas cylinder supply. Unlike gas
cylinders, which require continuous changeover, our gas generators can run 24 hours a day if required. Therefore, the
return on your investment can be realised within 18 months. Not only do you have increased capacity but you also
reduce health and safety risks as there is no need for high pressure storage or potential injuries due to manual handling
of cylinders.
CO2 purifier generators always provide the equivalent to or higher purity than gas cylinders, and the purity is always
repeatable. This is because contamination can be released from gas cylinder walls as they run out of gas.
By incorporating a number of unique features combined with the latest technology, our CO2 purifiers should be your
number one choice as they provide you with the following benefits: High Performance - All our CO2 purifiers utilise a carbon sieve that has a crystalline pore structure adapted to trap and
fix molecules smaller than oxygen and nitrogen including CO2, moisture and hydrocarbons.
This process delivers impressive results with CO2 removal down to 1ppm and moisture removal reduced to -70°C dew
point.
Lower Lifetime Costs - Our generators have also been designed minimise the time taken for maintenance, with 2,000
hours (replacement filters) and 4,000 hours (compressor change) maintenance taking only 30 minutes.
0685/02
CLAIND GAS GENERATOR PRODUCTS
TECHNICAL DATA
MECHANICAL DATA
SPECIFICATION
COPUR
Moisture
-70°C dew point
CO2 Removal
< 1ppm
Outlet Pressure
5-9 Bar (75-135 PSI)
Connection/Outlet
1/8”
Noise Level
<50dB(A)
Height
830mm
Width
400mm
Depth
580mm
Weight
57kg
ELECTRICAL DATA
SPECIFICATION
COPUR
Power Rating
80VA
Electrical Supply
230VAC – 50Hz
ENVIRONMENTAL DATA
SPECIFICATION
COPUR
5°C - 40°C
Operating Temperature
ORDERING DATA
GENERATORS
MODEL
DESCRIPTION
LG/CO2PUR/110
CO2 Purifier
LG/CO2PUR/240
CO2 Purifier c/w Moisture Filter
ACCESSORIES
CODE
DESCRIPTION
50/002
INSTALLATION KIT FOR LCMS/AZ
50/007
CONSUMABLE KIT FOR CO2PUR
50/112
AUTO CYL SWITCH KIT 1/4" FOR AZ/LCMS