BIHAR AGRICULTURAL UNIVERSITY
SABOUR-813210, (BHAGALPUR), BIHAR
SHORT TENDER NOTICE No.108
Sealed EOI are invited through registered /speed post /courier services, from
Reputed/Registered, Supplier/Dealers/Firms/Company/Enterprises for the supply of Laboratory
Equipments during 2015-16 & 2016-17. Sealed envelope containing full information along with
supporting documents, should reach in the office of the undersigned on or before 02/02/2016
upto 4.00 P.M. Details are available on www.bausabour.ac.in.
O/I Central Store (H.Q.)
List of Equipment/Instruments
Sl.
No.
Name of Item
1.
Bench-top
Refrigerated
Centrifuge
Rotors
with
2.
Digital Plant Canopy
Analyzer
3.
Electronic
Weighing
Balance
4.
UV-Visible
Spectrophotometer,
USB cable, Software,
Printer and Computer
included
5.
Portable Leaf
Meter
6.
IRGA
Micro
Area
Specification
EMD (Rs.)
Running power = 220 – 240 VAC, 50 Hz, running temperature – 4 °C to
ambient with custom settings, max.RCF= 16000 g, option for adjusting the
RCF / RPM and time, provided with fast cooling option, display for RCF /
RPM, time, temperature, capacity to accommodate rotor for 1.5 / 2ml
eppendorf tubes and
20-50 ml Falcon tubes.
The instrument should be suitable for non-destructive measurement of Leaf
Area Index, PAR, Solar Beam transmission coefficients, diffused radiation
transmission coefficients, mean foliage inclination angle, Plant Canopy
extinction coefficient.
Measuring time : 1 sec.
Fish-eye lens angle : 160O-1800
Image Resolution : 700 x 500 pixels
Probe Size : 20 x 20 mm
Arm Length : 400-600 mm
The instrument should includes with built-in Digital Camera imaging probe
with auto leveler built in PAR sensor, high energy rechargeable battery,
battery charger operating manual, and carrying case etc.
Weighing balance with LCD display, accurate and precise measurement.
Features – GLP Compliant and RS232 port for Printer / PC
Readability 0.1mg
Weighing Capacity >200g
Tare Range – 220g
Repeatability 0.1 mg
Linearity ± 0.2 mg
Stabilization Time <3s
Calibration Internal automatic Calibration
Pan Size ~85mm Dia (aprox.)
Wavelength range: 200 nm or below to 830 nm or above, Wavelength
accuracy: +/- 1 nm, Light Source: Xenon flash lamp, Automated data
analysis after user defined settings, Measurements for cell density,
Determination of quantity and purity of nucleic acids (DNA and RNA),
Determination of labeling efficiencies, Colorimetric assays for enzymatic
activities, Measurement and record of UV/Vis spectral ranges or just
measure individual wavelengths from 200 nm or below to
830 nm or above, option to select user required wavelength for all future
applications, Cuvette path length = 10 mm
Minimum volume = 200 ul
Field portable, Battery operated for the in-situ measurement of Leaf Area,
width, length, perimeter and whole area. Should have the latest high speed
scanner sensor technology enabling measurement to be made faster and
easier than ever. Should display the image of the measured leaf and image
can be stored and downloaded to PC. Parameters to be measured: Length,
area, width, perimeter Average and accumulated area, Units of measurement:
User selectable mm, cm, inches, Max. measurement width : 10 cm, Precision
: 1% linear, +/- 2% area, Resolution : 0.065 mm2, Memory : 2000 data sets,
Display : 64 x 240 pixel graphic display, Battery : Nickel metal hydride 1.2
Ah, Weight : 1.8 Kg., Carrying Bag Battery charger Instruction manual
Basic Spare parts kit and data down loading Cable
Field portable, provided with stand, rechargeable batteries. Leaf chamber:
11,000
7,000
2,100
12,000
7,000
54,000
Page 2
7.
Pulse
Modulated
Chlorophyll
Fluorometer
8.
Chlorophyll
Meter
9.
Vernier Caliper
10.
Additional Rotor for a
already
installed
benchtop
cooling
centrifuge
(5430R,
Eppendorf)
Fume hood for plant
molecular
biology
laboratory
11.
Content
12.
Refrigerated
Incubator Shaker
13.
Ethidium
bromide
decontamination
system
14.
Empty
Liquid
Nitrogen Container
small for measuring cereals photosynthetic rate and large for measuring
bigger leaves as that of maize and trees.
Weighs <1.5Kg, at least 20 hour battery life, 660 nm and 450 nm
excitation channels, Dual Halogen and LED actinic light and saturation
pulse sources, 2 GB integral memory, USB, Ethernet & RS-232
connectivity, dark adapting clips
12,000
Measured parameters: CCI value, Measured area: 1cm diameter circle,
Resolution: 0.1 CCI unit, Repeatability: +/- 1 %, Sampling acquisition time:
2-3 seconds, Storage capacity: More than 150,000 measurements, User
Interface:128 x 32 pixel graphic display, data manipulation, beep signal
status and warnings, Output: USB 1.1 and RS232, Operating temperature
range: 0-50 oC. Temperature compensation: Temperature compensated
source and detector circuitry for minimal drift over full range, Battery: ~10
V alkaline battery, Auto off interval: 4 to 5 minutes, Dimensions: 100-150 x
70-80 x 20-25 mm3, Weight: 150-200g
Digital, measurement: 0.1 mm to 10 cm, Weight less than 200g, data storage
card system
6X50 ml rotor (incl. rotor lid, sleeve and adapter), Model: F-35-6-30, Make:
Eppendorf
7,000
Dimensions (WXDXH Approx.) mm: 1200 X 750 X 1600, Exterior: SS 41
plate 1.2t (epoxy powder coated), Interior: Trepsa, Windows and Sash:
Safety clear glass 5t & A1 sash, Cabinets for acids/bases and organic
solvents
1. Shaking Frequency: Approx. 50 -350 rpm
2. Shaking Deviation: +/- 2% of the set value
3. Shaking Indication: Digital
4. Shaking Motion: Orbital
5. Tray Dimension: Approx. 400 x 400 mm
6. Universal tray should hold approx. 35 Nos of 100 ml flasks/25 Nos of 250
ml flasks/16 Nos of 500 ml flasks/ 9 Nos of 1000 ml flasks/4 Nos of 2000 ml
flasks
7. Should provide all different types of clamps mentioned in earlier point.
8. Temperature Range: Approx. 10° C to 60° C
9. Temperature Accuracy: not more than +/- 0.5° C
10. Temperature Sensor: high quality
11. Temperature control Indication: Digital
12. Audible & Visual alarm for temperature deviation
13. There should be the provision for keeping at least one stationary tray
13. Electrical Requirement: 220-250V, 16 Amps, 50 Hz
14. Warranty: 12 months from the date of installation.
14. Should fulfil the requirement of National and International safety
measures
1. Capacity- approx. 10 lits
2. Able to remove >99% of mutagenic ethidium bromide (EtBr) from
electrophoresis buffers and EtBr staining solution.
2. After EtBr removal buffer can be safely poured down in to the laboratory
drain without any further treatment.
4. Provision to replace bind EtBr cartridge or filter
5. Also send the quotation for EtBr cartridge or filter, separately.
Capacity- approx. 20 L & 50 L
Double wall vacuum and insulation which provides long term storage of
6,000
1,300
3,000
5,000
5,000
800
Page 3
15.
Empty
Liquid
Nitrogen Container
16.
Horizontal
air flow
17.
Non-refrigerated table
top centrifuge
18.
Ultra-sound sonicator
19.
Gradient -PCR
20.
Horizontal
Gel
Electrophoresis
system with power
pack
21.
Deep Freezer. (-80 to 86 Degree Celsius (For
Storage
of
Plant
laminar
liquid nitrogen
Capacity- approx. 10 L
Double wall vacuum and insulation which provides long term storage of
liquid nitrogen
1. Should have the working space and HEPA filter of around/more than 100
x 50 x 50 cm
2. Should have digital controller
3. Working space should be made of stainless steel
4. Should provide illumination around/ more than 2 x 35 W
1. Should accommodate at least 16 micro-centrifuge tubes of 1.5 ml / 2 ml
capacity
2. Should provide around/more than 13000 RPM
3. Should provide around/more than 12000 x g RCF
4. Noise level should be < 65 dB
5. Acceleration time for maximum speed should be around/ less than 25 s
6. Deceleration time from maximum speed should be around/ less than 25 s
1. Processing volume range should cover 300 micro l to 30 ml
2. Should have the provision of fitting different probes
3. Should provide more than 15 kHz power
4. Should provide stand with holder
5. Should provide sound enclosure system
6. Should be operated in switch-regulated continuous or discontinuous mode
7. Should have control over the amplitude
i. Independent temperature block(8-16 different temperature gradient) and
gradient accuracy over a range of 1-20 degree C.
ii. User interface through colour touch screen.
iii. Amplification ability upto the range of 2 Kb in short duration
iv. USB port for data transfer
v. 96 well block format(sample block of 0.2 ml capacity) with automatic
height adjustment for 0.5 ml tubes or 96 well PCR plates.
vi. Max. block Ramp rate: 4-5 degree C/sec and max sample block Ramp
rate: 3-3.54-5 degree C/sec.
vii. A campatible Voltage stabiliser
i. Gel System Mini (Horizontal): Sample Flexibility: max. 36
Buffer Volume: 500-700 ml Gasketed U.V. Transmissible (UVT) Gel Tray,2
Combs: 1.5 mm thick, Gel Volume: 50-80 ml
ii. Gel System Midi S(Horizontal):Sample Flexibility: max. 160
Buffer Volume: 1000 ml,U.V. Transmissible (UVT) Gel Tray with End Gates
4 Microtiter
Combs: Gel Size (width x length): 15 x 15 cm,Gel Volume: 100-120 ml
iii. Maxi Gel System:Sample Flexibility: max. 168
Buffer Volume: max. 2300-2500 ml,
U.V. Transmissible (UVT) Gel
Tray
Gel Volume:230- 250 ml
iv. Pwer Pack:
Input Power: 230 VAC, 50-60 Hz
Timer: 0 - 99:59 h
Voltage: 2 - 300 V
Current: 4 - 500 mA
Power: 0 - 90 W
Min. load rasistance: upto 1 ohm
Display: LCD
Deep Freezer Vertical type
Capacity around 400 ltrs.
Temperature: -60 to -860C
800
2,400
2,400
9,000
8,000
7,000
10,000
Page 4
Tissues,
Enzymes
Antibiotic)
RNA,
and
22.
Electroporator
(For transformation of
E.
coli
and
Agrobacterium)
23.
Transgenic
Green
House (As per DBT
Biosafety level – 2
guideline)
24.
Incinerator for plant
Voltage: should be operate on 220 V / 440 V
Microprocessor controlled. CFC free refrigerants. Automatic voltage boost
compensate for low voltage and brown-out condition. Integrated over
temperature safety alarm with battery backup and audible warning of
temperature deviation. Washable condenser filters to keep fins free of dust to
maintain peak cooling efficiency. Digital temp. Display. Push button set point
display.
Microprocessor Controlled, With Digital Display both for current and time,
Both Manual and Pre set settings for E. Coli, and Agrobacterium, Output
Waveform: decaying or truncated decaying exponential-decay with resistor
capacitor time constant Voltage and current: 3,000 V peak into >600 W load;
limited at 100 A peak
maximum, Voltage adjustable in 200–3,000 V range with 10 V precision; 5
ms default or 1–4 ms with 0.1 ms precision, Input voltage 220–240 V,
Operating environment 3.5–35°C
1. Unit Area: 750 Sqft. Approx.
2. Buffer Chamber (Aprox.): 5’ x 7’ with double door system
3. Doors: 2 Nos. size (Aprox.): 2.0m x 1.0m each
4. Super Structure: made of ISI marked G.I. sq. pipe vertical polls & truss
and other supports
5. Glazing: all sides and top with triple wall U.V. Stabilized Poly Carbonate
sheet to be fixed with polycarbonate ‘H’ & ‘U’ profile/ aluminum strips, all
the joints of sheet duly filled with silicon sealant to avoid air leakage.
6. Cooling System: ECS with fan and cellulose cooling pad, motor, water
storage approx. 500 ltr,
7. Humidification System: by providing, super-fine static mister especially
designed for cooling and humidifying green houses, mist Chambers over
rooting tables and livestock, HD motor, filtration unit, water storage 500 ltrs,
8. Controller Panel: Microprocessor based fully programmable for
Temperature, Humidity & 24 x 7 programmable photoperiodic light
controller fitted panel, programmable with protection controller etc.
9. Roof Screen: 75% OR 50% shading net to deduct light intensity, provided
on roof with manual gear operated for easy folding/ rolling of net.
10. Air Curtain: 3’ wide heavy duty installed at entrance door with auto
On/Off switch.
11. Lighting System: Photo-synthetically Active Radiation Lamps with
photo-simulator
12. Outer Screen: As per DBT guidelines, all vent area should be covered
with stainless steel 40 mesh, fixed on pipe frame living appropriate space to
cover fan, pad, A/C etc. from outside.
13. Plumbing: All water lines cocks/ valves to close for maintenance, float
valve to control water level and all other accessories as per requirements
14. Electric Fitting: All ISI marked, Copper wire (1.0mm to 4.0mm as per
requirements) Switches 5-15Amps, MCB 6 Amps- 40 Amps as per
requirements
15. Steel Bench: 10 Nos. size (aprox.) 6’x 3.0’ x 2.6”, frame made of G. I.
sq. pipe with supported polycarbonate top, movable with wheel
16. Foundation: Grouting of side poles in CC 1:3:6 (30 x 30 x 60-75cm)
below GL
17. Curtain wall: All side of the structure 23 cm wide 45cm above ground
level with 30 cm foundation and with PCC base, duly plastered and painted
18. Flooring: Flooring with 75mm thick base over that CC 40-50mm thick,
top with good quality non-slippery ceramic floor tiles.
19. Plinth Protection: 50cm wide 35mm thick 1:3:6 CC over bricks bat base
with drain all side of green house.
Capacity: Approx 50 kg,
6,000
18,000
11,000
Page 5
and microbial waste
material
25.
Spectrophotometer
26.
Wet sieve shaker
27.
Dry sieve shaker
28.
Constant
head
permeameter
assembly with brass
permeameters
29.
Changing
head
permeameter
assembly with brass
permeameters
30.
Soil Air permeameter
31.
Soil moisture and
temperature
meter
with data logger
Automatic and electrically operated with electrical control panel and digital
temperature meter,
Capacity for Instant disposal of plant and microbial dry waste with
Front Opening Door to be used to load waste as well as cleaning and
checking purpose, need to be fitted with
inside refractory lining giving excellent high heat retention,
The ash to be collected in an Ash Collection tray at the bottom of the
incinerator
Stainless Steel Exhaust pipe (Chimney) with either self supported or guyrope supported
Chimney with Tower installation with lamp as per requirements
Instrument must have a full graphical display and pre-installed methods for
the determination of nucleic acid purity and concentration, protein
concentration, bacterial cell density and having ability to measure
Absorbance or concentration at any wavelength without the requirement of a
computer with the following specifications:
Light source – Xenon lamp, Wavelength range: 190 nm or below to 900 nm
or higher, bandwidth: 5nm, Detector: 1024 element CCD array, Wavelength
accuracy atleast ± 2nm, Photometric Range: -0.300A or below to 2.500A
or higher, Provided with an onboard large graphical display for
interpretation and analysis of the result, Scans for nucleic acid for purity
checking (between wavelength 220 nm or below to 320 nm or higher),
Compatible with standard 10 mm pathlength cuvettes, disposable cuvettes
and low volume cuvettes, provided with onboard software for data
interpretation and analysis and a printer for printing the result, Software must
include the methods for DNA, RNA and oligonucleotide calculations,
protein assays such as direct UV measurement, BCA, Biuret, Bradford and
Lowry and measurement for the cell density. Power requirement = 220 – 240
VAC, 50 Hz, One year Warranty
- (Yoder type) for simultaneous operation with four sets of sieves.
-Four sets of sieves to be supplied.
-Automatic 0-60 minute timer.
- sieve table is inclined from the vertical axis and the direction of inclination
changes progressively
-100 mm sieve diameter
-Capable of using up to 6 sieves in a stack
- furnished with a piezometer tube, scale, water fittings, porous stones and
pedestal base.
- The chamber is clear plastic
and constructed in two sections to accommodate undisturbed or remolded
samples.
- furnished with a piezometer tube, scale, water fittings, porous stones and
pedestal base.
- The chamber is clear plastic
and constructed in two sections to accommodate undisturbed or remolded
samples.
-Easy manual operation
-Proven accurate measure
-Multi sample sizes using the fast-exchange sample holder
-Operating pressure max: 0.5 bar
-supplied with external pressure source.
-Probes for measuring temperature and moisture for multiple depths (5, 10
and 20-cm).
-Capable of giving direct readings of volumetric moisture content.
-5 m data cable with option extension.
8,000
1,400
1,500
500
600
600
500
Page 6
32.
Infra
thermometer
33.
Pocket penetrometer
34.
Pressure
apparatus
35.
Soil tensiometers
(6 nos)
36.
Digital soil moisture
meter
Aluminium
soil
moisture boxes
(200 nos)
Buouycos hydrometer
(10 numbers)
37.
38.
39.
40.
41.
42.
43.
44.
red
plate
Hot air oven with
digital
temperature
display (2 nos)
Digital balance
Double
ring
infiltrometer assembly
with hook gauge (five
sets)
Soil core sampler
(complete set)
Pycnometer (nos)
Guelph permeameter
- Measurement Range -0 to 0.450 m3/m3 volumetric water content (0 to
45.0%)
-Operating Environment - -40°C to 50°C
-Data logger facility.
-on board thermistor
-Allows non-contact temperature measurement of a 3” diameter target from
12 feet away
-Digital display
- Lightweight direct reading penetrometer
- The spring-operated device
- permanent scale on the piston barrel reads approximate unconfined
compressive strength in kg/cm2
- An indicator sleeve retains reading after piston is released
-capable of measurements in 0.1 to 15 bars suction.
-two extractors with ceramic plates
- Accessories, soil sample rings, a pressure control panel and a compressor to
be supplied
-Compressor should be of maximum pressure 2.0MPa (20bar) with built-in
safety precautions, completely guarded and quiet.
- provision to place several ceramic plates with soil samples in the extract at
the same time.
-ceramic cup
- Three nos for shallow depth measurement (30 cm)
- Three for 60 cm depth.
- Digital display
- Capable of measuring upto 50-60 cm depth.
- Air tight lids
- Can be used for 200g soil sample
-
Molded, seamless construction with bouyoucos double
scale for all-around visibility.
- Never needs recalibration.
- stainless steel body
- Digital temperature display and control
- Fan for air circulation.
-least count 0.01g
-Max capacity – 200g
-double ring apparatus
-have one beveled edge,
- small sledge hammer
- Iron plate for hammering the assembly
- stainless steel,
-Sized by the outside diameter of the liner
- Include: Slide hammer, core cup and cap, 2 plastic end caps, and plastic
liner.
-Digital
permeameter, metal tripod leg, borehole auger, Soil Auger, collapsible
water container, and vacuum test hand pump, all in a durable carrying case,
maximum practical operating depth is 315 cm, tension adapter allows
measurements to be made under tensional and very low tension (negative
head) conditions,
Auger Cutting Diameter: 5-6 cm
Well Height Range: 2 cm to 25-30 cm
Hydraulic Conductivity Range: 10-4 to 10-7 m/sec
Collapsible Water container Capacity: 10 litre
1,000
100
26,000
200
600
400
400
2,000
3,000
600
500
1,000
5,000
Page 7
45.
Metallic Hot plate
with stainless steel top
46.
47.
Stop watch
Digital
room
thermometer
(1 nos)
Glass
thermometer
with Hg column
(2 nos)
Thermocouple
(5 nos)
Cone penetrometer
48.
49.
50.
51.
Soil compaction and
consolidation
assembly
52.
SDS PAGE
power
unit.(Vertical)
with
Pack
Maximum Permeameter Capacity: 3 liters
-45 cm x 30 cm
-Stainless steel top
-Electrially operated
-Temperature control and automatic cutoff
-Digital
-Digital
-
-Suitable for measuring temperature of flame and oven fires
-Temperature range upto 900 degree C.
-Static Cone Penetrometer
-Takes readings in approx 15 cm depth increments.
-Double rod structure
- Outer rod of high strength chrome alloy tubing.
-Inner rod of stainless steel.
-Shaft assembly designed for a maximum of 250 lbf axial force.
- range = 0-70kgf/cm2.
- Mechanical screw loading jack, 10,000 kg. capacity with U-bracket and
swivel head.
- Penetration piston, 50 mm dia. threaded at the upper end.
- Extension rods consisting of 2 lengths 5 cm. 2 lengths 10 cm., 1 length 30
cm.,1 length 50 cm., and 1 length 100 cm., used as spacers between the
proving ring and penetration piston.
- Connector set, has eight connectors for coupling the penetration piston and
proving ring assembly either directly or through extension pieces.
-Dial gauge support of seamless pipe construction that stands 30 cm high
and 45 cm wide at the base.
-Provided with a quick release screw type clamp capable of sliding and
locking anywhere along 2 meter length of the bridge.
-Supplied with annular metal weight 5 kg., 250 mm dia with 53 mm dia
central hole, Slotted metal weight 5 kg., 215 mm to 250 mm dia with 53 mm
dia slot, 2 Nos. Slotted metal weights, 10 kg., 215 mm to 250 mm dia with
53 dia slot 2 Nos-Accessories : Dial guage 0.01mm x 25mm. High sensitivity Proving Ring
5000kg. capacity with calibration chart and carrying case.
 Gel Size 8 x 9cm
 Runs 1, 2 gels simultaneously
 Glass plates and spacer plates with integrated 1mm and 0.75mm spacers.
 Leak proof without using gel or external sealing.
 Clamp to exert equal pressure on entire gels plate.
 Gel casting stand to allow casting of upto 2 gels.
 A complete range of combs -10 and 15 wells
 Able to run 8.6 x 6.8 cm pre cast gel.
 Optional cooling plate for temp. control Chamber material molted not
pested
 Glass plates - 3 packs and 1mm spacer plates – 2
 (0.75mm 7 1mm Spacer)
 Output range – 10-300V, 0.01 – 0.4 A, 10-75W
 Constant current or voltage option with Timer
 4 recessed sets in parallel, Display – LED
600
Nil
Nil
Nil
400
5,000
2,000
5,000
Page 8

53.
Micropipettes
54.
Rocker
55.
Automatic N digestion
and
Distillation
system
(Kjeldahl)
X-Ray Diffactometer
56.
57.
58.
59.
60.
Fourier
Transform
Infrared Spectro
photometer (FTIR)
Differential Scanning
Calorimeter (DSC)
Particle size analyserzetasier
Rotary shaker with
conical flask holder
61.
Willy Mill
(Stainless
Grinder)
62.
Hot water bath (high
Grinder
Steel
Pipettes should be suitable for research work with adjustable volume, two
buttom operation three year warranty, having physiocaretechnolology,
lower part autoclavable.
 Chemically resistant full polycarbonated body, four digit display,
minimum pipetting error, IVD approved, TUV awarded.
Range 0.5 to 10 µl, 2.0-20.0 µl, 10.0-100 µl, 20.0 to 200.0 µl, 100 µl1000.0 µl,1000-10000 µl variable volume single channel electronic
micropipettes.
 Spring loaded Tip Cone: improved ergonomics, Tight fit to the tip.
 Quick connection clip: removed lower part easily.
 Adjustment opening: Adjusting pipettes to a specific liquid and volume.
Volume display four digit.
 Control button and ejector should positioned for perfect egronomics so
that very low operating force required.
 Perfect Piston System : Ultra light system made of forton.
 Speed 10-50 rpm with timer
 Dimension 30x30 cm
 Power AC, 230 V, 50 Hz
Automatic macro block digestion, distillation and titration system (digestion
block of atleast 20 samples at a time)
Small angle diffraction
Software along with computer.
Spectral Range
Mid-IR ( 500-6000 cm-1)
Software along with laptop.
Temperature range : -140 to 600oC (With standard cooling chamber using
liquid nitrogen)
Software along with laptop
Particle Size: 0.8 to 6500 nanometers
Zeta Potential: +/- 200 mV,
 Compact counter balanced drive mechanism ensuring high stability and
reliability even in continuous operation and uneven load distribution.
 Step less electronic frequency control ensures gentle start and maintains
preset speed.
 Brushless Induction drive motor practically maintenance free.
 Speed is controlled through a SMPS based DC drive unit by a speed
control knob or a variable speed range from 20 RPM to 300 RPM.
 Digital display of speed with presetting facility.
 Fitted with Off/On timer for shaking time control.
 Shaking amplitude 30 mm.
 Universal Platform to accommodate interchangeable clamps (49/56/60
no’s) of assorted sizes for different capacity of flasks (100ml, 250ml).
 Automatic restart at preset speed in case of power failure.
 All steel construction.
 ½ HP motor Stainless steel of 220 Volt A.C.
 Chamber fitted with hopper three delivery stainless steel sieves of 20, 40
& 60 mesh.
 Size of inner chamber is 100 x 50 mm.
 A removable safety Glass sheet plate from the face of chamber of permits
observation during operation. Willey Mill is fitted on substantial Cast
iron base. Allen Key for adjusting blades and 3 Glass Jars, brush etc.
 Double walled inner chamber made of Stainless Steel & outer made of
3,000
400
14,000
1,80,000
30,000
40,000
50,000
2,800
800
400
Page 9
Stainless Steel. Top has 75 mm holes with concentric rings. Temperature
range upto 99°C. Accuracy ± 5°C thermostatically Controlled fitted with
Neon Lamp; indicator and workable on 220 Volt 50 Hz. A.C.
 Water level cut off device Digital temperature controller with an accuracy
of ± 1 °C P.I.D. based temperature controller with an accuracy of ± 0.5°C.
 Number of hole is 16 with concentric rings
Nephelo Meter
 Range: 0 to 1000 NTU
 Display: 3 ½ Digital LED
 Accuracy : +/-3% Full Scale +/- 1 digit
 Resolution: 1 NTU/JTU
 Detector: Photo diode
 Light Source: 6 to 6.8V, 250 to 300 mA Tungsten Lamp
 Sample System: 30mm dia Clear Glass Test Tubes
 Calibration: With Formazine Solution
 Power Supply: 230V +-10%, 50 Hz AC with built-in Voltage Stabilizer
 Memory: In-built memory to retain both range standard solution and last set
value even after power loss
 Standard Accessories: One Set of 3 Glass Test Tubes of 30 mm. Dia&
Instruction Manual.
1. Microprocessor controlled CHNS Analyzer with integral keypad and
CHNS analyser
capable for multiple operating modes with a sample (solids and liquids)
size of 0-500 mgs. The instrument should work in the principle of
‘Frontal Chromatography’
2. Furnace temperature atleast 12000C, The analysis time should be within 6
minutes for CHN mode and 8 minutes for CHNS mode.
3. “Auto Regeneration” facility to regenerate chemicals in reduction tubes should be built-in.; System should be offered with a 60-position autosampler for un-attended operation.
4. Imported regulator (directly from the manufacturer of the CHN analyzer)
for the carrier gas must be offered in the main system; Auto start up,
equilibration, wake up, shut down; Auto analysis and calculations, routine
maintenance scheduling Auto pressure test on start up by solid-state
pressure transducer; Continuous monitoring on diagnostics and digital read
out of temperatures and pressures; Accuracy (%) should be < 0.3 and
Precision (%) should be < 0.2 for
Analytical ranges: Element
Range (mgs)
C
0.001-3.6
H
0.001-1.0
N
0.001-6.0
S
0.001
Instrument should have gas saver mode and run counter.
 The instrument should have the capability to run using either Helium or
Argon as the carrier gas.
 System should be offered with at least 2000 analysis Kit for CHN and 500
analysis Kit for CHNS, including (a) UHP grade Helium gas filled cylinder
(b) UHP grade Oxygen gas filled cylinder (c) UHP grade Nitrogen gas filled
cylinder (d) Double stage SS regulators for Oxygen & Nitrogen gases (E)
Suitable PC, Printer and UPS.
Stereo
Binocular  UIS2(Universal Infinity System) plan infinity optics with antifungal
Microscope
treatment providing image flatness
 10X(FN 20) paired eye piece
 Plan achromatic objectives 4X, 10X, 40X and 100X
 Seidentopf observation head, observation tube 30º incline interpupillary
distance adjustment range 40-75 mm
capacity)
63.
64.
65.
2,200
80,000
1,200
Page 10
 6V 20W halogen bulb
66.
Phase
Contrast
Microscope Halogen
67.
Gas Chromatography
with
Mass
spectroscopy
68.
Deep Freezer
(-860C)
 4X & 10X Brightfield objectives,
 40X phase objective, phase contrast insert, Walton-Beckett graticule, green
filter, 1.25 ABBE condenser,and 10x20 wide angle eye pieces.
 Anti-fungus treatment helps protect optical parts even in high humidity
regions.
 Inward-facing quadruple (CX31), or quintuple (CX41) revolving nosepiece
improves access and makes for quick, easy slide changes.
 Fixed Abbe condenser N.A. 1.25, centerable and focusable for Köhler
illumination.
 A 6V/30W halogen bulb provides ample illumination for any observation.
 Ergonomically designed frame with low positioned coarse and fine
focusing controls,
 Aanalyzer slot for linear polarized light (CX41 only
 Built in left or right hand stage with rackless design (CX31 right hand
only), low positioned X,Y controls with ergogrips to facilitate operation
 Including TCD (Detectivity: 300 pg/mL Butane), ECD (Detectivity 7
fg/sec Lindane) and FID (Detectivity 2 pg/sec) detector (Max. Temp.
450ºC) and 3 injectors with auto sampler
 Mass spectrometer must be included where Mass filter: pre- and postfilter; high ion transmission efficiency lens-less design, Mass range
(m/z): 10 to 1200 Da, Scan rate: up to 14,000 Da/sec, Resolution: user
adjustable from Unit (0.7 Da) to 4 Da, with user selectable settings
 A Multi-tasking operational system color touch screen with WVGA
resolution.

Keypad, and display support selectable international languages,
 Multiple method internal storage with battery protected memory, Column
oven temperature programmable from ambient +4°C to 450°C, Column
oven cryogen LCO2 ( to –60°C) or LN2 ( to –100°C),
 Maximum temperature ramp rate: 150°C/min (optional,
180°C/min.),Rapid oven cool-down system
 Complete electronic (or manual) flow control for injectors, (including
split flow) and detectors.
 Gas chromatography software, installation kit, Branded PC and Printer,
Carrier gas cylinders, Calibration gas can, Gas purification Pannel also
included
 Temperature range -00C to (-860C)

Capacity 19,440 vials(388L)
 Micro processor controlled accurate & automatically operated by sense
of ambient temperature & voltage etc.
 LED digital display to clearly show the system status.
 Self testing S/W & multi alarm with battery back up alarm for audible &
visible for high – low temperature, power failure, sensor failure, high –
low voltage fluctuation, over heated condenser , High – Low ambient
temperature.
 Remote alarm through internet (optional); Pressure (vacuum), equalizing
design for easier door and painted sealing designed together with the
cabinet from heat retardant keeps the cabinet safe from frosting.
 Double compressor (danfoss) cascade refrigeration technology, highly
efficient and reliable, high and EBM condenser fan; Noise level <48dB.
 Pull down time: less than 6 hrs. Vacuum insulation panel material;
sealed vacuum between insulation layers of PUF.
 USB communication port: RS 232 port to transfer data etc. Access port
2,200
6,000
7,400
Page 11

69.
Autoclave
70.
Scanner cum printer
A0 size
Projector
71.
72.
Atomic
Absorption
Spectro
photometer






























as when required to log on to access the system (Event-logging through
RS 232 port). USB communication, USB port in seven days chart
recorder (optional) to store data manually or through RS 232 to your PC.
Safety:
Safe door lock to prevent unauthorized opening. Multiple protection like
pass word protection, automatic start up, delay compressor, self
protected voltage back –boost etc.
Power 230V/50Hz.
Chamber volume: 85 Liter
Standard cassettes capacity: 15 Full
No. of trays: 2
Voltage/frequency (hz):230V (50Hz)
Power (w)/ current (a): 3000W/13A
Cold Cycle Time: 31 Min.
Hot Cycle Time: 21 Min.
11 to 44-inch (28 to 111.8 cm) rolls / 8.5x11 to 44x66-inch sheets /up to
58sq ft/hr in best mode 2/up to 2400 x1200optimized dpi
Bright stylish and easy to use – The affordable VPL-ES7 data, easy setup
and operation, off and go, short projection distance, high security, close
captioning, recommended lamp and filter replacement time approx 4000 /
3000 Hours
Optics: True Double Beam optical design
Monochromator: The system should be based on Echelle Grating and
optimized for both UV and Visible energy or equivalent. Slit width
should be auto selectable
Detector : Solid State Detector preferred
Wavelength Range: 190-900 nm
System should have at least four lamp holders with built in power supply
for lamps
All the method parameters related with lamp selection, calibration, and
control of flow gases should be through integrated software
The instrument should have programmable gas control both for air
N2O/C2H2
The unit shall have flexiblity of purging the optics so that it can be
operated even in demanding atmosphere of laboratory
The nebuliser should be resistant to all sorts of acids and solvents. It
should have a built in nebulization device like flow spoiler and impact
bead
Lamps should have built in code for current, slit width, wavelength and it
should automatically optimize for energy for each lamp
The system should have built in power supply at least for one lamp so as
to accommodate lamps like As, Se, Hg etc for vapour generation studies
Various safety interlocks like burner head, gas pressure, nebulizer, drain
full condition etc. should be intergrated inside the system.
In future the system should bew upgradeable to graphite furnace with
Auto dilution accuracy, and flame Auto sampler etc.
Hydride generator should be supplied and quoted
2 year AMC after compilation of warranty must be quoted
The following indigenous items should be quoted
I) Acetylene filled gas cylinder with double stage Gas regulator
II) Nitrous oxide Gas filled cylinder with Double stage gas regulator
III) Argon filled Gas cylinder with Double stage Gas Regulator
IV) Stainless Steel Hood with exhaust fan including necessary fittings &
ducting facility
1,600
10,000
1,400
46,000
Page 12
73.
High
Refrigerated
Centrifuge
74.
Vaccum Oven
75.
76.
Vaccum pump
Magnetic Stirrer (2)
77.
N2 gas cylinder with
pressure control (4)
Dispenser
Mixer-grinder
Vacuum desiccators
BOD incubator cum
shaker
78.
79.
80.
81.
Speed
82.
83.
Refrigerator
Deep freezer
(-200C)
84.
85.
Precision drier
ION/pH meter
(with ion selective
electrode)
86.
TDR
(Time
Domain
Refractrometer)
With quotation for
additional
access
tubes







V) 2 KVA Branded online UPS with 30 min. back up
VI) Suitable branded PC & laser printer
VII) Suitable 2 ton split Air condition Machine
Along with voltage stabilizer
Maximum RPM : 20000
Temperature range :-8 to 400C
Rotor Complete with Polypropylene Tubes (Capacity 6 x 50 ML) Type :
Angular, plastic container
 Maximum RCF (G): 37000
 W×D×H : 890 x 627 x 575
 Along with voltage stabilizer
 Maximum tube size : 100 ml
 Equipped with autotimer
Temperature range 4-300oC
Automatic thermostat
Temperature control
Moisture trap and vaccum regulator
Digital magnetic stirrer hot plate with temperature sensor
Max temperature 2000C
Maximum RPM : 3000
Capacity 7 m3
Stainless steel body along with regulator double gauge and pressure control
Upto 50 ml volume
Capacity upto 100 g wt
Desiccation in vacuum
Chamber size 600x600x600 mm
Shaking tray size 500 x 500 x 500 mm for holding 25 nos of 100 ml and 16
nos of 250 ml Erlenmeyer flasks with stainless steel lotus clamps
The shaking motor with variable speed control system with shaking amplitude
of 25 mm
Speed range 50-200 orbits/minute
Temperature range 5-600C with an accuracy of +/- 1 0C
The base of the incubator should be fitted with DC driven motor for orbital
shaking
Digital display
Tripple door 330 liters
Hard top chest freezer
Chamber size 500x450x900 mm
Capacity 170 ltr.
900 x 900 x 1200 mm
 Ions measuring (Fluoride electrode)
 CMC function for ISE (Ion Selective Electrode) and pH visualizers the
ideal measuring range.
 Graphic display with text menu of convenient handling.
 Blank value correction, increment methods.
 Automatic calibration.
 Several mutiplexer
 Operating system : Window
 Probe length upto 30 cm
 Output may be stored
 Power : DC/AC
 Test Pulse width : 2 ns and 10 ns
 Temperature operating upto 550 C
 Water resistance operating
3,800
600
500
1,000
2,000
500
Nil
300
2,000
1,000
6,000
1,000
300
8,000
Page 13
87.
Rotary evaporimeter
88.
Green House Gas
(GHG)
Gas
Chromatography














89.
Poly
Pro
Access
Tubes for AQUAPRO Soil Moisture
Sensor
90.
SPSS 20.1 (Software)
91.
Stabilizer
(3 KVA)
92.
Stabilizer
(6 KVA)
93.
Mini spin variable
speed microcentrifuge
94.
Electrophoresis unit
with power pack

Rotary evaporimeters
Heating bath of capacity 3-4 liters
vertical glasswares 1-2 liters space
vaccum gauge.
Fully Microprocessor Controlled Gas Chromatograph with all
accessories
Complete electronic (or manual) flow control for injectors
(including split flow) and detectors. Up to 3 injectors and 4
detectors including Mass Spectroscopy (MS)
Column oven temperature programmable from ambient to 450°C.
PWOC Packed/Wide-bore On-Column Injector
Flame Ionization Detector (FID): Detectivity: 2 pg C/sec
Thermal Conductivity Detector (TCD): Detectivity: 300 pg/mL
Butane
Electron Capture Detector (ECD): Detectivity: 7 fg/sec Lindane
Data Acquisition Software
GC Power cord, GC Installation Kit, Hydrogen gas cylinder,
Nitrogen gas cylinder, Zero Air gas cylinder, Gas Purification
Panel of same brand and Calibration Gas Cans must be included
Branded PC & Printer, 5 KVA Voltage Stabilizer and split air
condition System of 2 ton capacity must be included
Access tube : Precision Radio Frequency stable access tubes for use with
Aqua Pro Soil moisture sensor
 Dimensions: Approximately 1 meter (39 in.) long by 2.5 cm (1 in.)
 Material : Specially Formulated, clear polycarbonate.
 Cap: Rain and sprinkler protection with specific design for humidity
control.
 Tube Ends : Bottom sealed. Top has a Cap to keep rain or irrigation
water out.
Product Description
Model part number
 IBM SPSS Statistics Base 21.0
D0FMALL
 IBM SPSS Advanced Statistics
D0FRKLL
 IBM SPSS Missing Values
D0FOULL
 IBM SPSS Regression
D0FPCLL
 IBM SPSS Forecasting
D0FQ5LL
 IBM SPSS Neural Networks
D0FO3LL
 IBM SPSS Bootstrapping
D0FRRLL
Auto manual voltage stabilizer with voltmeter, input (auto) 130-280 volt,
input (manual) 50-300 volt, output 190-240 volt, +/- 2% maximum current
14 Ampier.
Auto manual voltage stabilizer with voltmeter, input (auto) 130-280 volt,
input (manual) 50-300 volt, output 190-240 volt, +/- 2% maximum current
14 Ampier.
13400 rpm, volt – 240, frequency 50 hz.
1. Variable speed – upto 13400 rpm
2. Digital display
3. Timer and quick spin button
4. Automatic lid release
12-place microcentrifuge sares bench-top space while providing powerful
variable speed centrifugation upto 12110 x g
Quick deceleration and acceleration of less than 15 second
12-place roter for 1.5
Complete horizontal electrophoresis system. Combined power supply and
tank with casting accessories. Combined detachable power supply and gel
900
60,000
7,000
(For 100 pc.
tubes)
9,000
300
400
600
1,600
Page 14
95.
Deep freezer
(-80ºC) horizontal
96.
Autoclave
(Horizontal) 750mm x
550mm 30” x 22
Digital
platform
weighing scale
97.
98.
Automated
stereo
microscope
with
camera
attachment
and camera lucida
tank. Full function power supply set voltage and amperage upto 150 volt/400
mA.
Operating temperature range -45 to -860C. Temp. controlled microprocessor
display, Minimum 2 lines 16 character LCD, Power failure alarm, internal
body material stainless steel 304 grade, electrical 220-240 volts, internal
volume 350-706 litre.
Double Walled, Stainless Steel, Radial Locking System with Pressure gauge,
safety device Pressure 22 p.s.i. Automatic Vacuum Breaker, dimension:
750mm x 550mm 30” x 22 capacity – 152 L
Capacity – 150 Kg
Accuracy – 20 Kg
Platter size – 600x600 mm, LED display,
Inbuilt rechargeable battery, Stainless steel
Microscopes
Observation methods:
ADVANCE STEREOZOOM RESARCH MICROSCOPE WITH DIGITAL
IMAGE ANALYSIS SYSTEM
ZOOM RATIO
18:1 OR MORE
TOTAL MAGNIFICATION
7.5X – 270X (WITH
10X EYEPIECE)
EYEPIECE TUBE
TRINOCULAR.
EYEPIECES
10X (F.N. 22) WITH
DIOPTER
ADJUSTMENT ON
BOTH THE EYES.
ZOOM RANGE
0.75X-13.25X OR
MORE
OBJECTIVES
SUPER HIGH
RESOLUTION PLAN APO 1X
SUPER HIGH
RESOLUTION PLAN APO 2X
20,000
8,800
500
30,000
STAND
SLIM L.E.D.
TRANSMITTED STAND.
APERTURE DIAPHRAGM SHOULD HAVE BUILT-IN APERTURE
DIAPHRAGM SO THAT PHOTOMICROGRAPHY OPTIMUM
DEPTH OF FOCUS CAN ALSO BE ACHIEVED BY ADJUSTING
THIS DIAPHRAGM.
MINIMAM WORKING DISTANCE
60 MM OR MORE
WITH 1X & 20MM
WITH 2X
OBJECTIVES.
EPISCOPIC ILLUMINATION
LED RING
ILLUMINATION TO
BE ATTACHED
WITH THE
OBJECTIVES.
NOSEPIECE
NOSEPIECE TO
ACCOMODATE
BOTH THE
OBJECTIVES AT A
TIME.
Option II
Page 15
DIGITAL CAMERA SYSTEM
DIGITAL CAMERA CAPABLE
OF HANDLING LOW LIGHT
IMAGES WITH 2/3” HIGH
DENSITY CCD CHIP,
APPROX. 12 MILLION PIXEL
RESOLUTION.
CAMERA LUCIDA ATTACHEMENT
FOR DRAWING
DIAGRAMS
Option III
Software should be with following features:
 Image Acquisition, Time Lapse Imaging, Z-Stack, Annotation, Macro,
Report Generator facility, Measurement of different shapes, sizes, lengths
and Angle measurement etc., Video recording.
Should have option to get focused image of different focal point images of
uneven surfaces
Branded computer for live image viewing and analysis with windows 7
O.S., 2 GB RAM, 500 GB HDD, PCI-E SLOT along with 600 VA UPS.
NOTE: Microscope, Camera & Software should be from same
manufacturer.


Simple polarized light

Brightfield

Darkfield
Focus:
Manually operated focus
Motorized focus
Revolving nosepiece
Stands:
Standard stand
99.
100.
Weighing balance
101.
Water
purification
Unit (Double Stage II)
Digital pH Meter:
102.
BOD Incubator:
103.
Digital Refractometer:
Observation tubes:
Trinocular tube
Tilting binocular tube
Tilting trinocular tube
(2 digit after decimal II)
Capacity: 300 g; Accuracy: 0.01 g
Borosilicate Glass; capacity: 4 LPH
3.5 digit LED display with auto temperature compensation, gel filled epoxy
body combination, pH electrodes and RTD probe with recorder output and
slope control facility
Temp. range 0°C ~ + 60°C; Temp. consistancy ± 0.1°C; Temp. uniformity
±1.5°C (at 37°C); Inside material SUS-304; Temp. control PID; Temp.
sensor PT-100Ω; Temp. heat-up rate 25°C ~ 60°C (within 15 min); Temp.
cool-down rate 25°C ~ 0°C (within 15 min); Heater: Incubator 1000W;
Refrigerator 1/3 HP; Safety devices Short circuit breaker, overheat protector
refrigerator overload protector,
sensor abnormality, over low protector; Inside dimensions (mm) W700 x
D580 x H1200; Outside dimensions (mm) W790xD860xH1770(with
casters); Volume (liters) 487
Shelf 5; Power supply 110/220V (12A); Weight 220kg
0 – 850B, Battery operated, suitable for fruit and vegetable, the dual level
1,400
4,000
1,200
5,000
900
Page 16
104.
105.
106.
107.
108.
Circulating
Water
Bath:
Automated Vortexing
System
Magnetic
Stirrer
(With Hot Plate):
UV-Vis
Spectrophotometer
109.
110.
Max.–Min.
Thermometer
Hygrometer
Muffel furnace
111.
Hot Plate
112.
Silica criscibel
113.
114.
115.
Desiccator
Crucible Tongue
Heating assembly
116.
Kjeldahl Distillation
Assembly
117.
Penetrometer
Of
LCD measurement and temp. Make – Hanna Instrument; Model – HI 96801
Coolant Reservoir Capacity 33 Ltrs.
2,000
500
2 MLH
500
Optical system: Double beam; Wavelength range:190 to 1,100nm; Spectral
bandpass:1.5nm; Display: colour LCD with backlight (26.4cm); Printer I/F:
Centronics interface
Serial I/F RS-232C (exclusive for UV Solutions program)
Size (main unit): 500 (W) × 605 (D) × 283 (H)mm (with LCD lowered) or
500 (W) × 605 (D) × 241 (H)mm (without PC and printer); Weight (main
unit): 31kg or 29kg; Power supply:
100, 115, 220, 230 or 240V,
50/60Hz; Power consumption: 300VA
00 to 1000 C
12,000
Digital Max.-Min. memory for temp. & humidity; Imported
Dimensions (mm) 300 x 200 x 200; Temperature 1350 0C or more, accuracy
±2 0C; Temperature control through microprocessor based PID controller
with minimum 30 steps; Furnace insulation ceramic wool; Temperature
settings and display digital and double digital; Power source 220V; 50 Hz
single phase
7.5” x 7.5” (191 mm x 191 mm) chemical-resistant, ceramic-coated, stainless
steel tops; Rugged die cast 17 luminium body with small footprint 8W x 9D
x 4.5”H (203 mm x 229 mm x 114 mm)Speed range for stirring models 60 to
1500 rpm; Temperature range for heating models: from ambient +5°C to
380°C
The purity of silica obtained is as high as 99.8%. Products confirms to BS
Standards; SofteningTemp:1700’C; AnnealingTemp:1150’C ;
WorkingTemp:1900-2000’C; Operating temp: 1050’C Continuous & 1350’C
Intermittent
430 mm overall height; 285 mm disc diameter; Body I.D. 300 mm
300
4,000
Stainless Steel body
7500C good corrosion resistance
Six-Place Open Combination
Kjeldahl Digestion/Distillation Unit with Blower Exhaust
Unit. 44” wide x 17” deep x 79” high. Frame shall be constructed of epoxycoated tubular steel. Heaters. Unit shall include twelve 600-watt heaters, 6
for digestion, 6 for distillation. Heaters shall be operated by 12 individual
infinite-control knobs with variable input from 20-100% capacity.
Distillation Manifold. Unit shall be equipped with 6 seamless stainless steel
tubes and cooling water temperature gauge. Inlet and outlet water
connections shall be 3/4” NPT and supply line shall be 1/2” ID minimum.
Six connecting bulbs and 6 delivery tubes for distillation process shall be
provided. Fume Manifold. Unit shall include a fume manifold of chlorinated
polyvinyl chloride (CPVC) fitted with six Teflon nipples. Blower Exhaust.
Unit shall include a 1/3 hp blower exhaust system for fume removal, located
on left end of unit. Blower exhaust connection shall be sized for use with 6”
nominal (6 5/8 OD) vent duct. A 6" PVC pipe and flexible coupling with
clamps shall be provided. Blower exhaust outlet shall be mounted 55 1/2"
from the floor. Electrical. Unit shall be completely assembled and factory
wired to a main circuit breaker panel to specified AC electrical code.
Range: 0.2 – 4 kg (x105 pa)
Nil
Nil
Nil
Nil
Nil
250
200
500
Page 17
Fruit/
Sclerometer
Fruit
118.
Penetrometer
Fruit/
Sclerometer
Of
Fruit
119.
Digital
Vernier
Calipers
Manual slide calipers
Digital Slide Calipers
Compound
Microscope
120.
121.
122.
123.
124.
125.
126.
127.
Digital
Weighing
balance up to 600g
Digital
Weighing
balance up to 1 Kg
Digital
Weighing
balance up to 2Kg
Digital
Weighing
balance up to 5Kg
Cool Chamber
128.
Texture Analyser
Food Material
129.
Vacuum Tray dryer
130.
Freeze dryer for fruit/
vegetable
131.
Viscometer
(Brook’s field)
Chips making line
(Potato slicer,
Potato peeler, fryer)
Pet bottle blower
machine/ Plastic bottle
making machine
CO2/O2 ANALYSER
132.
133.
134.
Resolution: ± 0.1
Precision: ± 0.5
Insertion Depth: 10 mm
Weight: 0.3 kg
Range : 0.5-15 kg (x105 pa)
Resolution: ± 0.1 - ± 0.2
Precision: ± 0.3 - ± 0.5
Insertion Depth: 10 mm
Weight: 0.3 kg
500
Nil
0-150 mm
0-150 mm
Precise graduated slow motion reading to .002mm,
Eyepieces WF10x and 15x (Two nos.)
Objectives 10x, 45x (SL), 100x (SL) oil immersion
Capacity 600 g; Readability 0.1 g; Pan size 120 mm x 120 mm
Nil
Nil
2,000
Capacity 1000 g; Readability 0.5 g; Pan size 217 mm x 168 mm
Nil
Capacity 2000 g; Readability 1.0 g; Pan size 217 mm x 168 mm
Nil
Capacity 5000g; Readability 2.0g; Pan size 217 mm x 168 mm
Nil
200
Size (W×D×H): 12ft. × 14ft. × 12ft.
Shelves size: 4.2’ x 18” shelve to shelve distance: 15”
No. Of lights: 6 Nos. Light provided at inside roof : surface Temperature
range: 0°C to 25°C
Accuracy: ± 1°C
Force range- 2500N, Force resolution- 0.015%, Speed range-11000mm/min, Speed accuracy- ±1%, range setting-1-295mm
With different probes to assess firmness, shear test, consistency,
compression, shearing, snapping
Tray- 8-10, Max Temp. 100°C, Heating Load- 8-10 KW, vacuum capacity of
pump- 70-80 M3 / MR.
Temperature: -55°C
Vacuum degree: <10 Pa
Freeze-dry acreage: 0.07-0.12 sq. m
Water-Capture Capability
: 3-4Kg/24h
Capacity
: 5 Liter
Size: 580×560×340(mm)
Freeze dry time: About 24h(material thickness 10 mm)
Min Viscosity range 15 Cp, Maxim- 20 Lac Cps
Speed- 0.3-100rpm, accuracy- ±1.0% of range, Repeatablity- ±0.2%
Slicer: Capacity 40-60 kgs/hr with nut and bolt arrangement for locking of
blades and top 4 different blades.
Peeler: Cap. 5kg. with 0.5Hp motor
Capable to prepare different sized bottle
12,000
With inbuilt data logger, O2 sensor- range- 0-25%, sensing method-ZrO2,
Sampling method- sample draw 30ml/min, response time- 4 sec, sentivity±20ppm ±1%, pressure range- 500mbar to 3000mbar
CO2 sensor- CO2 sensor- range- 0-100%, sensing type- NDIR, Sampling
method- sample draw 300ml/min, Accuracy±0.2% vol CO2±3% measured
12,000
28,000
8,000
12,000
6,000
3,000
2,000
Page 18
135.
136.
137.
138.
139.
140.
Crown
corking
machine
PP
Cap
sealing
machine
Hot filling tank (for
beverage)
Microwave oven (Lab
scale)
Planetary
Dough
Mixer
Extruder
(Co rotating
screw)
twin
141.
Double Deck Bakery
Oven
142.
Bread Slicer
143.
Dough Sheeter
144.
145.
146.
Proofing Chamber
Fry Dump
Four door refrigerator
147.
Automatic
Fibre
value, sensor life expectancy >15yrs sentivity-±20ppm ±1%, pressure range500mbar to 3000mbar
For 200 mL to 1 ltr Sized bottles
Cap. 8-12 bottles/min.
--
1,000
1,000
Lab scale tank with stirrer and juice filling outlet, Capacity- max. 30 Litter
600
--
600
Capacity: 8 to 10 Kg with three blade i.e spiral, leaf, etc. Electrically
Operated, Attached with speed regulator,
Better efficiency.
Manufactured using high-grade raw material.
Complete with S.S. removable bowl, S.S. blade having variable 3 different
speeds and one neutral speed suitable.
Easy operation and running is noiseless.
Resistance to corrosion.
Gravity Feed Hopper of Raw Materials.
Quiet Direct Drive Speed Control of the Feed Screw via the Inverter
Motors are efficient Inverter Duty Inverter Supplied with Extruder
Manual Head Gap Controlled by Mechanical Ratchet.
Construction: Painted Mild Steel. Stainless Steel Belt Guard. Stainless Steel
Hopper. Stainless Steel Guard at Product Discharge.
Die Plate: Bronze, & Screw: Die Steel. A.C. Motor : 10 HP (Make: Siemens
/ ABB/ BBL) Gear Motor: 3 HP (Make: P B E G Ltd) Electrical Control
panel: A C Drive of 3 HP (Make: Danfoss / BCH / ABB) , Production
Capacity: (08-15 kg / hour)
High quality Double Deck Baking Oven.
Suitable for all Kind of baking i.e. bread, pastries and cookies etc.
Available in gas or Electric operated mode.
Heavy M. S. interior, S. S. front and heavy legs.
Mineral wool insulation.
Independent settings to heat top and bottom of each deck separately.
Bread Cutting Width size: 11MM
Suitable for Bread / Cake / Rusk slicing
Noiseless and vibration free operations
Solid and strong body construction
Easily replaceable blades
Stainless steel parts which are directly in contact with the product
High quality and good performance and well designed.
Various thickness adjustment and final thickness can be fixed.
Consistent performance.
Maintenance free reliability.
Safety & durability.
Ease of use
Vacuum Glass system, RH and Temperature Nob
Dimension: 450 x 460 x 310
Good Quality compressor.
Self defrost system.
Digital temperature displayer and controller.
High cooling efficiency, energy-saving.
Specially designed structure, ensuring even temperature.
Entirely SS 304 construction.
No. of Sample Test a time: 6
1,000
30,000
6,000
1,500
600
2,000
500
1,500
5,000
Page 19
Estimation System
148.
Tablet
machine
149.
Portable Ethylene gas
analyser
150.
Microwave Digestion
System
making
Sample Size: 0.1 to 4 gms
Heater Source: Ceramic infrared Heater with reflectors
Independent Sample loading with individual mechanical controls
Extractor: Marked Borosilicate extraction vessel with borosilicate reflex
condenser
Crucible: Sintered silica glass crucible
Pore Size: P1 Porosity disc
Vacuum Source: Fibra Flow system with self priming pump connected to
gaint water suction filter pump for rapid filtrations
Pressure Pump: Electrically operated air pump for declogging
Control valve: Individual Control valves for vacuum and reverse air steam
Temperature Controller: Micro Processor based digital temp. controller
Temperature range: Ambient to 500°C (Continuously variable)
Temp. Accuracy: ±1°C
Pre heating fro acid/alkali: Fibrastat hot place casted aluminum alloy heater
with thermostatic Control
Direct reagent addition: Direct to extractor from top
Heater Wattage: 2500W
Individual high temperature resistant adapter for intact leak proof seal
Number of operation per crucible: 15
Safety Features: Auto over temperature protection, auto sensor break
protection, auto error indicator, etc.
Electrical requirement: 220V 50HZ AC Main
Cold Extraction System (Optional)
With single punch automatic compression and injection device. Automatic
feeding and removal of tablets. Automatic Tablet Making Machine made up
of heavy cast body and centric pressure system with steel hopper.
Air sampling rate 0.4-0.8 liters/min
Nominal Range 0-100 ppm, Accuracy ± 5% adjusted for temperature and
humidity, Operating Environment
5°C - 45°C (10-90% humidity
non-condensing)
 Installed microwave power : 1800W.
 The maximum microwave output power : not less than 1000W, the
operating power realizes automatic variable frequency control (VFC)
and non-pulsed continuous microwave heating via reaction,
temperature and pressure feedback.
 Volume of the chamber : 65 litres.
 System builds in forced air cooling system with air exhaust volume of
3.1m3/min.
 Vessels are made up of TFM which should be automatically cooled
inside the cavity.
 Stainless steel cavity coated with multilayer PTFE (Teflon).
 Six layer intensified steel structure armored glass explosion proof
chamber door is equipped with an automatic pop-up buffer structure.
 Large, long life and high brightness LCD screen displays reaction
parameters and curve change in real time.
 Electronic & mechanical dual-control door lock is safe, reliable and
convenient.
 Buffer structure of automatic pop-up chamber door: Under abnormal
circumstance of the inside of the chamber, the door pop-up
automatically to release high pressure gas from the opening, and
then return automatically. As a result, the damage of high pressure gas
to chamber structures and digestion vessel may be relieved.
 Under full closed corrosion protection, this vessel can resist the erosion
2,000
8,000
40,000
Page 20
of any acid and alkali liquids and gases.
Fully closed anticorrosive super strength aerospace composite fiber
outer vessel with Teflon coating has strong transverse impact
resistibility and can’t crack or break upon explosion, superior to other
high molecular engineering plastics.
 You can store program in the system which can be modify as per need
time to time.
 Vessels is also superior to other high molecular materials in dielectric
property, has good microwave penetrating property and heat
conductivity, and is able to heat and cool quickly.
 Applying the patented vertical explosion pressure relief structure
and fiber materials vessel, this workstation can limit bursting force
within the design range, prevent any damage of transversal crack of
digestion vessel to the instrument or the operating personnel, realizes the
effect of vertical explosion, and greatly improves the operation safety.
 Rotor vessels are 6 in number.
 Volume of the vessel is 100 ml.
 Maximum sustained pressure is 0 -10MPa (100bar/1500psi).
 Pressure accuracy is +/- 0.1MPa
 Highest sustainable temperature is 300°C.
 Temperature accuracy is +/- 1°C.
 Linear materials for inner vessel are made up of TFM.
 The rotor vessel has piezoelectric crystal pressure sensor to measure
the pressure and anti-explosion mechanism to control pressure in all
vessels.
 The system has immersing Pt temperature probe to measure
temperature.
 The systems have a protection shield around the reaction vessels to
ensure safety even in the event of spontaneous chemical reaction.
PC controlled Texture analyzer to measure the textural properties of foods
and food products like Grains, bakery, confectionary, fruit and vegetable
products, Meat , Dairy products etc.
1. Load /Force Range:
250 Kg (2500N).
2. Standard Load Cell
1000N
3. Additional Load cells:
(OPTIONAL)2,5,10,25,50,100,250,500,1000,2500N
4. Force Resolution:
0.015%
5. Force Accuracy:
Better than 0.017%
6. Speed Range:
1- 1000mm/min.(0.04 – 40in/min)
7.
8. Speed accuracy at 5mm/s: +/-0.01%
9. Position Accuracy:
better than +/- 0.1% of set speed
10. Data Acquisition Rate:
16000 readings/sec
11. Operating Temperature:
0-50°C
12. Net Weight:
18 kg
13. PC Interface:
Standard RS 232 serial port
14. Power supply:
100-250 VAC 50-60 Hz
15. Firmware updates:
FLASH update of firmware via PC
16. Test Modes:
The system must able to perform various
test modes viz.
Single cycle, Multiple cycle, Hold until time,
Fracturability,
Tensile, Adhesiveness.
RECOMMENDED GENERAL PROBE KIT
CYLINDERS: 38.1mm ; 25.4mm ; 12.7mm BS ; 10mm ; 6mm ; 2mm

151.
Texture Analyser
12,000
Page 21
CONES: 90 degree ; 60 degree ; 45 degree ; 30 degree
BALLS: 25.4mm (432-088); 12.7mm (432-089)
MISC: 2mm Needle ; Perspex Knife Edge
System supplied with Power supply cable, Serial cable, Operating Software
,USB Computer Cables, Heavy Duty Stand, PC/Laptop with DeskJet color
printer.
152.
NIR Spectra Analyzer
Parameters that can be monitered are:
60,000
1. MOISTURE 2. PROTEIN 3.SUGAR 4.ALCHOHOL 5.IODINE
NO 6.OIL CONTENT FAT 8. CRUDE FIBRE 9. STARCH 10.ACID
NO 11. HYDROXIL NO 12. COLLAGEN 13.VITAMINS And many
many more…..
NO OF FILTERS
--19.
2. MEASUREMENT TIME
-APPROX 25 SEC ( 1 Scan , 19
Filters )
3. Spectral Range
1445 – 2348 nm.
( Sample / Ref Measurement for each Filter )
4. Display
240 x 128 Pixels. LCD
5. Spectral Bandwidth
--10nm +/- 2nm
6. Control
-Central Operation Button.
6. Signal to Noise Ratio
--> 10,000 : 1
7. Product Database
---99 Products with 15 Properties
Each
8. Detector
--Lead Sulphide ( PbS )
9 External Interface
---1 Serial USB Interface,
Bluetooth, I Serial
RS 232 , 1 No 10/100 Ethernet
for LAN.
10. Power
--90 – 260 V AC / 50/60 Hz.
11. Weight
-20Kgs.
15. Temperature
5 – 40 Deg C.
Rotating Cup Drawer Assembly.
Sample Drawer for Presentation of Coarse samples ( Rice, Wheat,
Pulses, Soya, etc ) rotating cup aluminum, Rotating cup drawer with
integrated control electronics.
Accessories: 3 x Rotating Cup , sample cup ( aluminum ) for rotating
cup drawer for sample presentation of coarse samples.
Viscous Cup ( VISCOUS SAMPLES) VARIABLE PATHLENGTH.
with reflector, pathlengh 200 - 800 μm adjustable
153.
Portable thermometer
to measure air and

soil temperature


SOFTWARES: : software platform for chemometric applications in Spectroscopy! for
versatile routine application in daily analytical measurements, at-line or in
the laboratory. Including multi-linear
regression calibration functions, database, on-line prediction under protocol
functions.
Portable thermometer with following specification:
Accuracy: ±0.02°C over full range
Resolution: 0.01 °C
Range: -200°C to +850°C
500
Page 22
154.
155.
156.




Digital Thermometer
with probe
Thermo hygrometer
Portable
digital
refractometer:
Stability: <0.005°C per year
Display in °C, °F ohms
Statistical functions: Average, Min/Max
and Standard Deviation
 Range: -50 to 300 C
 Unit: C/F change-able
 Resolution: 0.1 C
 Accuracy: 1 C
 Temperature sensing time: 1 s

Probe with 4 m cable
 Probe length: 150 mm
 Data-hold function
 Power-supply: battery or power operated
 Auto shut-off: 15 minutes
 Low battery indicator
Thermometer, hygrometer is designed for direct measurement of temperature,
relative humidity for compressed air up to 25 bars with 1m cable. Audio and
optical alarm of measured values. Memory of minimum and maximum
measured values. Function Hold - manual storing of actual values for later
displaying.
Product Type
pH Meter
Meter style
Portable
Range (pH)
0.00 to 14.00
Range (Temperature °C)
0 to 100
Range (Temperature °F)
32 to 212
Resolution (pH)
0.1/0.01
Resolution (Temperature)
0.1
Accuracy (pH)
±0.01 pH
Accuracy (Temperature)
±0.1°C
Temperature compensation
Automatic or manual
Display
LCD
Interface
RS-232
Calibration
Up to 3 points
Waterproof
Yes
Power
Two AA batteries (included)
Data logging (points)
300
CE Compliance
Yes
easurement
Range
Brix 0.0 to 45.0%
Minimum
Iindication
Brix 0.1%
Measuremen
t Accuracy
Brix ± 0.1%
Measuremen
t
Temperature
5 to 40°C
(Automatic
Temperature
Compensation )
Ambient
5 to 40°C
Power
006P dry battery
500
500
300
Page 23
Temperature
157.
158.
159.
160.
161.
162.
Supply
( 9V )
 Resolution: 0.1pH
 Accuracy(@20C/68F): 0.1 pH
 Calibration: manual, 1 or 2 point
 Battery operated
Refractometer
 Range: 0-85% brix, 0-80 C temp
 Resolution: 0.1% brix, 0.1 C
 Accuracy: 0.2% brix, 0.3 C
 Temperarure compensation: auto, 10-40 C
 Sampling time: 1.5 seconds
 Auto off
 Battery operated.
Conductivity Meter
 Range: 0-1990 uS/cm
 Resolution: 0.1 uS/cm
 Accuracy: 1%
 Temperature compensation: 0-50 C
 Battery operated
2 Ton Split air  A 2TR (6000 Kcal/hr) capacity with rotary compressor
conditioner
 A internally grove condenser coil with fan and fan motor
 Thermostatic Expansion valve
 Evaporator coil
 Capillary tube with blower and blower motor cordless remote control
 Refrigerant Flow Meter
 Compound &Pressure gauge for LP & HP measurement
 LP-HP cut-out
 Energy meters, digital volt meter, ammeter and temperature indicators
 Heating coils with electronic dimmers
 Strainer
 thermometers for measuring inlet & outlet air in evaporation (RH)
 A solenoid valve & hand shut off valve for operating the two expansion
system
 Equipment mounted on fabricated stand
2 Ton window air  A 2TR (6000 Kcal/hr) capacity with rotary compressor grove condenser
conditioner
coil and evaporator coil
 A fan cooled condenser and Evaporator of equipment capacity
 Thermostatic Expansion valve
 Capillary tube with cordless remote control
 Refrigerant Flow Meter
 Compound &Pressure gauge for LP & HP measurement
 LP-HP cut-out
 Energy meters, digital volt meter, ammeter and temperature indicators
 Heating coils with electronic dimmers
 Wet & Dry bulb thermometers for measuring inlet & outlet air in
evaporation (RH)
 A solenoid valve & hand shut off valve for operating the two expansion
system
 Equipment mounted on fabricated stand
200 lit Refrigerator
 Control Panel Stand Alone Metallic powder coated panel
 Compressor Hermetically Sealed, Rotary type for 200 lit with
Thermostat
 Condenser An air cooled condenser of suitable Capacity with Fan
 Expansion System Capillary Expansion
Portable pH Meter
300
200
500
800
800
500
Page 24






163.
Forced cooling tower
with Cross flow heat
exchanger
164.
Natural cooling tower
165.
Solar
unit
166.
Refrigeration
Model
refrigeration
Tutor
Thermostatic Expansion system with solenoid valve
Evaporator An air cooled Evaporator Coil of suitable Capacity
Refrigerant Freon R134
Voltmeter Ammeter Digital voltmeter of range 0-300V AC, 0-20A AC
Energy meter Energy meter 5-10 Amps
Temperature Indicator Digital Temperature Indicator ,-50 to 150°C with
TSS
 Thermocouples Teflon coated Cr –Al (K-type)-5 no.
 Gauges Pressure and Compound gauges for HP and LP with HP-LP cutout
 Stop Watch Digital, 1/10 of a second
 Experimental Capability Actual, theoretical COP
 Box shaped structure enclosed with fan ( 800mm X 800mm X 1700mm)
 Spray header
 Spray nozzles
 Eliminator
 Temperature sensors
 Pump ( 1 HP)
 Pressure sensors with peripheral device (AC)
 PDC unit with appropriate data analyzer
 Minimum 5 Ton Cooling tower capacity
 Box shaped structure with louvers ( 1200mm X 1200mm X 2100mm) made
of steel
 Spray header
 Spray nozzle
 Temperature sensors
 Pump (1.5 HP)
 Minimum 5Ton Cooling tower capacity
 Compressor: Hermetic 0.5 HP, 220V single phase, 50/60 Hz
 Condenser: Air cooled with electric fan
 Evaporator: air cooled with electric fan
 Expansion valve: thermostatic expansion valve
 Pressure gauges: LP and HP gauges with differential pressure switch
 Filter liquid separator and slight glass
 Thermometer: digital
 Refrigerant : R134a
 Solar panel with Ups backup
 Refrigeration components mounted on a sturdy table with a vertical
perforated steel plate and connected by copper pipes to form a
refrigeration circuit of industrial type.
 Four Solar Refrigeration panels of 500 Watts each. The UPS system
should be of 2.2KVA capacity with four batteries and each battery is
150AH with 12 volts . The backup power should be of at least one and
half hour
Extensive Range Experiments
Fully Instrumented For Study Of Vapour Compression Refrigeration Cycle
Well-calibrated Sensors, Indicators And Gauges
Compact, Sleek And With Silent Operation
Comprehensive Teaching Manual
Echo Friendly Refrigerant- Freon-134a
Total Instrumentation Mounted On A Portable Trolley, Made Of Ms Square
Tubes Duly Powder Coated.
A Hermetically Sealed Compressor Of 1/3rd Hp Capacity (Tecumseh Or
4,000
3,000
5,000
2,500
Page 25
167.
Ice Plant Tutor Model
(50 Kg Of Ice In 24
Hrs, In Blocks
168.
Air
Conditioner
Trainer- Duct Type 1
Ton Capacity
Kirloskar Or Equivalent )
A Fan Cooled Condenser Of Equipment Cap.
An Evaporator Coil Is Placed Inside The Frp Coated Ss Vessel (Chiller)
Thermostatic Expansion Valve & Capillary System
Refrigerant Flow Meter (Euraka Or Equivalent )
Compound &Pressure Gauge For Lp & Hp Measurement
Lp-hp Cutout
Energy Meter, Digital Volt Meter, Ammeter And Temperature Indicators
A Solenoid Valves For Operating The Two Expansion System
Hermetically Sealed Compressor: 1/2 Hp Cap.
Air Cooled Condenser : 1/2hp, 12” X 13” X 2 Rows
Fan Motor With Blade: 1/35 Hp
Expansion Device : Thermostatic Expansion Valve(10 To -40 Degc)
Rotameter: 0.6 To 62 Lph (Eureka)
Filter Drier: Dm-50(Dan Foss)
Energy Meter : 2.5 – 5 Amps
Solenoid Valve : ¼” Flare
Thermostat : For Compressor Control (U 50- 1018)
Pressure/Compound Gauges: For Hp-lp Measurement.
Digital Temperature Indicator : 50 To + 150°c
Thermocouples(5 No.) : K Type (Cr/Al)
Lp/Hp Cutout : Mp15 (Dan Foss)
Refrigerant: R-134a
Brine Tank:762*690*610 Mm(Mild Steel)
Ice Cans : 50*200*325 Mm-10 No.(Galvanized Iron)
Brine Solution : Calcium Chloride (50kg)
Insulation For Brine Tank: Bitumen & Thermo Cole @Outside(50mm)
Fiber Coat @ Inside (3mm)
The Apparatus Is A Laboratory Scale Working Model Of A Refrigeration
Cycle Unit, Portable–trolley Mounted Duly Powder Coated, Housed On A
Ms Angles With Formica Coated Wooden Ice Cabin & Control Panel To
Give Elegant Finish. The Compressor Is Fitted @ The Rear End Of The
Platform With Fan Cooled Condenser. The Evaporator Coil Made Of Copper
Pipe Of 3/8” Diameter And About 80 Feet Long Is Coiled And Placed In
The Brine Tank Which Is Insulated With Fiber Coat Inside, Bitumen And
Thermo Cole Coat @ Outside With A Thickness Of 50 Mm For Proper Heat
Insulation.
Extensive Range Experiments
Fully Instrumented For Study Of Air Conditioning Effect
Well Calibrated Sensors, Indicators And Gauges
Compact, Sleek And With Silent Operation
Comprehensive Teaching Manual
Echo Friendly Refrigerant- Freon-22
3,000
1,500
Duct Type Laboratory Model With Total Instrumentation Mounted On A
Portable Trolley, Made Of Ms Square Tubes Duly Powder Coated.
A Hermetically Sealed Compressor Of 1tr Capacity (Tecumseh Or Kirloskar
Or Equivalent )
A Fan Cooled Condenser And Evaporator Of Equipment Cap.
Thermostatic Expansion Valve & Capillary System
Refrigerant Flow Meter (Eureka Rotameter)
Compound &Pressure Gauge For Lp & Hp Measurement
Lp-hp Cutout
Energy Meters, Digital Volt Meter, Ammeter And Temperature Indivators
Finned Air Heaters For Heating & De-humidification With Electronic
Dimmers
Page 26
169.
Experimental
storage Trainer
170.
Water Cooler Test Rig
171.
Two cyllinder four
stroke diesel engine
test rig
cold
Wet & Dry Bulb Thermometers For Measuring Inlet & Outlet Air In
Evaporation (Rh)
A Solenoid Valve & Hand Shut Off Valve For Operating The Two
Expansion System
A Boiler Of 1kw Capacity For Producing Steam For Humidification Process
Portable–trolley Mounted, Housed On A Ms Square Tube Frame With
Powder–coated Metallic Platform To Give Elegant Finish. The Compressor
Is Fitted On The Platform With Fan-cooled Condenser. The Cold
Room/Freezer - Made Of Stainless Steel Enclosure, Well Insulated With
Bitumen And Thermo Cole, Coiled With Copper Tube Housed In An Ms
Chamber. The Rotameter, Thermostat Expansion Valve, Solenoid Valve,
Pressure/Compound Gauge, Lp/Hp Cutout, And Voltmeter, Ammeter &
Temperature Indicator With Selector Switch (To Measure Temperature At
Different Points Of The Refrigeration System) Are Mounted On The Panel.
Hermetically sealed compressor – 1/3rd HP cap.
Air Cooled condenser –1/3HP, size: 12” x 13” x 2 rows
Fan motor with blade, 1/83 HP
Expansion Device –Capillary & Thermostatic Expansion valve
Rotameter-6.2 to 62 lph (Eureka)
Hand shut off valves-1/4” & 3/8”
Filter Drier
Energy meter: 2.5 – 5 amps
Solenoid Valve
Thermostat
Pressure/compound gauges and LP/HP cutout
Digital Voltmeter 0-300° V AC
Digital Ammeter 0 - 5A AC
Digital Temperature Indicator - 50 to + 150°C
Thermocouples – k type (Cr/Al)
All the components are mounted on rigid steel frame. The trainer consists of
a hermetically sealed compressor, forced convection air-cooled condenser,
filter / drier, flow meter, expansion device and coil wound type evaporator.
Separate pressure gauges are provided to record suction and discharge
pressures and digital temperature indicators for various temperatures. The
refrigerant used is R-134 a which is environment friendly.
REFRIGERATION SYSTEM
Capacity: 0.30 TR @Rated test conditions
Compressor: Hermetically sealed. Make :Emerson Climate Tech./ Tecumseh
Products India Ltd./ Danfoss Ltd./or any equivalent make.
Condenser: Forced convection air cooled.
Condenser fan: Axial flow.
Evaporator: Provided.
Expansion device: Capillary Tube.
Accumulator: Forced convection air cooled.
Insulation: Axial Flow Type
Refrigerant: 1000 Watts; Finned Type.
CONTROLS & INDICATIONS
Provided for Temperature and Pressure
6 Channel facility with digital display.
2 Nos.; Dial type pressure gauges.
Glass tube Rotameter provided.
DBT & WBT measurement by sling psychrometer.
(14HP, 1800 RPM 4 Stroke Water cooled) with rope brake dynamometer
and Standard Accessories like (i) Fuel Measurement consumption by
Volumetric method (ii) Air Consumption using standard orifice & MS Air
5,000
4,000
1,600
Page 27
172.
Four stroke single
cylinder vcr engine
test rig
173.
Single
cylinder
4
stroke diesel engine
test rig
174.
Four
stroke
four
cylinder petrol engine
test rig.
175.
Cut sectional model of
mock layout of a
tractor
wiring
(electrical system of a
tractor)
working
model (diesel) with
battery
176.
Tractor
transmission assly
with
gear
box,
rockshaft assembly
177.
Cut section model of a
tractor assembly with
di engine assembly &
electrical
system
working
178.
Wood Turning Lathe
box (iii) Digital RPM meter (Except Mechanical loading) (iv)Digital
temperature gauges (Air IN, Exhaust OUT, Cooling Water IN, Cooling
Water OUT) (v) Water flow Measurement through Rotor meter 2400 LPH
(Varaible Compression Ratio engine, 5 HP, 1500 RPM, 4 Stroke Water
cooled) with Hydraulic brake dynamometer and all Standard Accessories
like (i) Fuel Measurement consumption by Volumetric method (ii) Air
Consumption using standard orifice & MS Air box (iii) Digital RPM meter
(Except Mechanical loading) (iv) Digital temperature gauges (Air IN,
Exhaust OUT, Cooling Water IN, Cooling Water OUT) (v) Water flow
Measurement through Rotor meter 2400 LPH
(5 HP, 1500 RPM, water cooled) with eddy current dynamometer and all
standard accessories like (i) Fuel Measurement consumption by Volumetric
method (ii) Air Consumption using standard orifice & MS Air box (iii)
Digital RPM meter (Except Mechanical loading) (iv) Digital Electronic
torque controller for Eddy current dynamometer (v) Digital temperature
gauges (Air IN, Exhaust OUT, Cooling Water IN, Cooling Water OUT)(vi)
Water flow Measurement through Rotor meter 2400 LPH
Engine: MPFI Engine (10HP, 1500rpm) With electrical Dynamometer and
all standard accessories like(i) Fuel Measurement consumption by
Volumetric method (ii) Air Consumption using standard orifice & MS Air
box (iii) Digital RPM meter (Except Mechanical loading) (iv) Digital
temperature gauges (Air IN, Exhaust OUT, Cooling Water IN, Cooling
Water OUT) (v) Water flow Measurement through Rotor meter 2400 LPH
This demonstration board should give a complete idea of the electrical
system of a Tractor. In this demonstration board the actual wiring with parts
and accessories of a Tractor arranged, according to the electrical circuit of a
Tractor and terminals are provided to connect the battery. By giving
connection the working of individual parts such as Self starter, Alternator,
Horn, Head lights, Tail lamps, Parking lamps, Side indicators, Brake light,
etc., can be demonstrated. The parts sectioned to show the internal
constructional details.
The model is made out of full size original used Tractor Transmission Assly
with Gear Box Rockshaft Assembly Suitable sectioning of the transmission
housing is done So as to demonstrate its complete operational
principle/Details, coated with suitable painting and plating of the Hardware
with suitable mounting option of entire model.
Model made out of original used tractor assembly, as detailed below.
Engine: Maximum parts and accessories of an engine like three
cylinders, Cylinder heads, valve ports, piston, connecting rod, inlet and
Exhaust manifolds, Fuel Injection pump, Fuel Injector, Diesel Filter,
Water pump, oil pump, air filter, self-starter, Alternator, Hydraulic
pump, Radiator etc are sectioned to clearly demonstrate the internal
constructional details.
Transmission system: Suitable sectioning of the transmission housing is
done So as to demonstrate its complete operational principle/Details, by
shifting the levers.
Other important accessories: accessories like Steering GearBox, Wheel
drum, Wheel Cylinder, Master cylinder, Silencer, Hydraulic systems
etc., suitably sectioned. Electrical Systems etc.,
The above-sectioned model should be provided with reduction gear unit
with motor for slow speed rotation (15 to 20 rpm) of the model, it will be
coated with suitable painting and plating of the Hardwares with suitable
mounting option of entire model
(bed length: 8”, Height of centre: 12”, bed width: 8”, admit between centre:
72”, Nos. of spindle speed: 3, Face chuck dia: 12”, R.P.M.: 3000/1500/750,
1,600
1,600
3,000
2,000
3,000
4,000
2,000
Page 28
179.
Centreless
Machine
180.
Bed type Pipe and
Bolt
Threading
Machine
Shaper Machine
181.
Grinder
182.
All Geared
Machine
183.
Hacksaw Machine
184.
Digital Tachometer
185.
Universal
Machine
186.
Cut section model of
rack and pinion type
steering gear box
(working)
Cut section model of
self starter
187.
Lathe
Milling
188.
Cut section model of
oil pump external and
internal
189.
Cut section model of
centifugal
clutch
(honda activa)
2 HP motor) with all standard accessories
(Max grinding dia: 125 mm, Min grinding dia: 6 mm, Regulating wheel: 2
HP, Nos. of speed:3, size: 300X150X127 mm, Grinding wheel: 15 HP,
speed: 1250 RPM, size: 500X150X305 mm) with standard accessories
(Saddle movement: 10”-12”, Spindle speed range: 60-90, Nos of spindle
speed: 2 or 3, threading capacity: 3/8'' to 1. 1/2'',3 HP, 960 RPM, automatic
leading cut off) with standard accessories
(Capacity: length of ram stroke: 18”, length of ram: 40.5”, length & width of
ram bearing: 28½x9, Max & Minimum distance from table to Ram:
15x1mm, Table: working surface of table: 18x11½”, Max horizontal table
travel: 18”, Max table travel vertical: 13”, angular movement of table on
either sides: 60ºL 60ºR, Tool head :Max vertical travel to tool slide: 6”, max
swivel of tool head: 60ºL 60ºR, Length of main slide base: 29”,Electric
motor: 1.5 HP, Drive Motor: 1440 RPM, Main switch starter: 3.5 AMP, Vice
overall dimension: 8”) with standard accessories
(Distance b/w centers: 1000-3000 mm. bed width: 430 mm. center height:
360 mm, swing over bed: 720 mm, swing over cross saddle: 370 mm, swing
over carriage: 410 mm, swing in gap: 900 mm, main spindle bore: 70-80
mm, Ns. Of spindle speeds: 18, speed range: 25-500 RPM, cross slide travel:
350 mm, top slide travel: 180 mm, main motor: 5HP, rapid motor for saddle:
2 HP, coolant pump motor: 11kW) with standard accessories.
(stroke per minute: 10-120, Blade size: 12”-14”, Electric motor: 1 HP, motor
RPM: 1440) with all standard accessories
(Range: 0-9999 RPM, Resolution: 1 RPM, Accuracy: Better than 0.01 %±1
RPM, Sampling period: 1 sec, display period: 2 sec, 230 V, Transducer:
Magnetic pick-up with 5 mts lead)
Table (Working surface: 1400*350 mm, Swivel: + - 45 DEGREE, T-SLOT
NOS/ SIZE: 3/17, T-SLOT CENTRE: 80 mm, DIST. FROM SPINDLE
MAX/MIN: 475-0 mm, X-LONGITUDINAL TRAVEL: 775 mm, Y-cross
travel: 255 mm, Z-vertical travel: 475 mm). Feeds (NO. OF FEEDS: 18,
RANGE OF LONGITUDINAL FEED/MIN: 13 to 305, RANGE OF CROSS
FEED/MIN: 13 to 305, RANGE OF VERTICAL FEED/MIN: 2.5 to 62, No.
of rapid feeds: 2, LONGITUDINAL RAPID FEED/MIN: 735, 1065,
CROSS RAPID FEED/MIN: 735, 1065, VERTICAL RAPID FEED/MIN:
147, 210). Spindle (NO. OF SPINDLE SPEEDS: 18, RANGE OF SPINDLE
SPEEDS (RPM): 35-1800, SPINDLE TAPER: ISO 40, ARBOUR
DIAMETER: 25.4 mm) . Electrical (Main motor: 5HP, Feed Motor : 2 HP,
Coolant Motor: 0.1 HP) with standard accessories like vertical attachment
and optional accessories like Dividing Head, Slotting Attachment, Rack
Cutting Attachment, Rotary Table and Driving Motor
2,000
1,000
4,500
5,000
1,000
600
5,000
Model made out of full size original parts, suitably sectioned and to
demonstrate the working of Steering wheel worms, Steering arm, etc., is
mounted on a sturdy iron frame.
800
Model made out of original used parts, suitably sectioned to demonstrate the
internal construction details showing the minute information, and working of
the same, the model suitably painted and mounted on a navopan wooden
base
Model made out of original used parts, suitably sectioned to demonstrate the
internal construction details showing the minute information, and working of
the same, the model suitably painted and mounted on a navopan wooden
base.
Model made out of original used parts, suitably sectioned to demonstrate the
internal construction details showing the minute information, and working of
the same, the model will be suitably painted and mounted on a navopan
400
400
400
Page 29
190.
Cut section model of
su carburator
191.
Cut section model of
tractor gear box –
(working)
192.
Cut section model of
solex carburator
193.
Model of cut sectioned
fuel injecion pump
(inline type – 6
cylinder
engine)
assembly
194.
Model of cut sectioned
fuel injecion pump
(distributor type- 4
cylinder) assembly:
195.
Cut section model of
sliding mesh gear box
–tractor (working)
196.
Cut section model of
synchromesh gear box
(working)
197.
Cut section model of
hydraulic brake unit four wheel type (cut
sectioned
and
working) with two
disc and two drum
brakes
Cut section model of
mechanical fuel pump
198.
199.
Cut section model of
dynamo
wooden base.
Model made out of original used parts, suitably sectioned to demonstrate the
internal construction details showing the minute information, and working of
the same, the model will be suitably painted and mounted on a navopan
wooden base
Model made out of original full size used gearbox, suitably sectioned to
show the gear mechanism of forward and reverse speeds. A Crank lever is
provided to demonstrate the mechanism. Complete unit is mounted on a
sturdy iron frame.
Model made out of original used parts, suitably sectioned to demonstrate the
internal construction details showing the minute information, and working of
the same, the model will be suitably painted and mounted on a navopan
wooden base
Model made out of original MICO make fuel injection pumps, which is
suitably sectioned to show the internal details such as the Cam, plungers,
delivery valves, tapped rollers, governor fittings and settings action of
acceleration etc., The model mounted on to novapone base, Suitable color
painting carried out along with Miracle coating for the model for extra gloss
and shine. The painting carried out in such a way that different colors are
used for different components such as identification of sectioned area etc
according to the colors code for easy identification of different systems and
mechanisms. All the hardware’s and gears suitably electroplated
Model made out of original MICO/BOSCH make fuel injection pumps
pumps, which is suitably sectioned to show the internal details such as the
Cam, plungers, delivery valves, tapped rollers, governor fittings and settings
action of acceleration etc., The model will be mounted on to novapone base,
Suitable color imported painting will be carried out along with Miracle
coating for the model will be done for extra gloss and shine. The painting
will be carried out in such a way that different colors will be use for different
components such as identification of sectioned area etc according to the
colors code for easy identification of different systems and mechanisms. All
the hardware’s and gears will be suitably electroplated
This model is made out of original full size used gearbox, suitably sectioned
to show the gear mechanism of forward and reverse speeds. A Crank lever is
provided to demonstrate the mechanism. Complete unit is mounted on a
sturdy iron frame.
This is made out of original full size used gearbox, suitably sectioned to
show the details of gear mechanism of forward and reverse speeds. A Crank
lever is provided to demonstrate the mechanism. Complete unit is mounted
on a sturdy iron frame.
This model contain two disc brakes in the front and two drum brakes at the
rear and made out of original parts such as two master cylinder Assembly
(one sectioned and one working), wheel cylinder, Brake drum, Brake Shoes,
calipers etc., suitably sectioned and mounted on a sturdy iron frame. By
operating the lever provided, the working procedure of the model can be
demonstrated.
This model is made out of original used parts, and suitably sectioned to
demonstrate the internal construction details showing the minute
information, and working of the same, the model suitably painted and
mounted on a navopan wooden base
This model is made out of original used parts, and suitably sectioned to
demonstrate the internal construction details showing the minute
information, and working of the same, the model suitably painted and
mounted on a navopan wooden base
500
1,000
800
800
800
800
1,000
2,000
600
500
Page 30
200.
Cut section model of
self starter-non axle
type
201.
Cut section model of
vaccum pump
(vane type)
202.
Cut section model
ofpiston
pump(air
compressor)
203.
Cut section model of
water pump
204.
Cutsection model of
turbocharger
Cut section model of
rotary pump
205.
206.
Cut section model of
four cylinder four
stroke di with turbo
charger
engine
(working)
207.
Cut section model of
steering gear box
(working)
208.
Cut section model of
single plate coil spring
clutch
system
(working)
Cut section model of
constant mesh gear
box (working)
209.
210.
211.
212.
Cut section model of
disc brake system
(working)
Cut section model of
air brake system
Plasma cutter
This model is made out of original used parts, and suitably sectioned to
demonstrate the internal construction details showing the minute
information, and working of the same, the model suitably painted and
mounted on a navopan wooden base.
This model is made out of original used parts, suitably sectioned to
demonstrate the internal construction details showing the minute
information, and working of the same, the model suitably painted and
mounted on a navopan wooden base.
This model is made out of original used parts, suitably sectioned to
demonstrate the internal construction details showing the minute
information, and working of the same, the model suitably painted and
mounted on a navopan wooden base.
This model is made out of original used parts, suitably sectioned to
demonstrate the internal construction details showing the minute
information, and working of the same, the model suitably painted and
mounted on a navopan wooden base
This model is made out of full size original parts, suitably sectioned and to
demonstrate the working of turbocharger, is mounted on a suitable base.
This model is made out of original used parts, suitably sectioned to
demonstrate the internal construction details showing the minute
information, and working of the same, the model will be suitably painted and
mounted on a navopan wooden base.
The model is made out of full size original four strokes used Diesel engine.
Maximum parts and accessories like four cylinders, cylinder head, inlet and
Exhaust manifolds, Fuel pump, oil pump, Water pump, Fuel Filter, Fuel
Injection pump, injectors, self-starter, Altenator, etc are sectioned to show
the internal constructional details of the engine. AF.H.P. 220/230V A.C.
Motor is coupled through a Reduction drive unit to the engine by which the
model can be demonstrated at very low speed of about 15 to 20 rpm. By
running the engine, the working of individual parts and accessories like
Crankshaft, Camshaft, Connecting rod, Pistons, Valves, different pumps, etc
can be demonstrated. This model is provided upto Flywheel and complete
engine is mounted on a sturdy iron frame
This model is made out of full size original parts, suitably sectioned and to
demonstrate the working of Steering wheel worms, Steering arm, etc., is
mounted on a sturdy iron frame.
1. Rack and Pinion type.
2. Worm and roller type
3. Recirculating ball type.
Model made out of original used parts such as Flywheel, Clutch plates, etc.
to demonstrate the working of clutch assembly. By operating the pedal
provided the model can be demonstrated. The entire model mounted on a
sturdy iron frame.
This mode is made out of original full size used gearbox, suitably sectioned
to show the gear mechanism of forward. A Crank lever is provided to
demonstrate the mechanism. Complete unit is mounted on a sturdy iron
frame.
The Model made out of Original parts such as Two Brake disc, two Caliper
assembly (one sectioned), one master cylinder etc, the model mounted on a
sturdy iron frame and can be demonstrated by operating the lever provided.
The model is made out of Original parts such as Air compressor, Unloader
valve, foot valve, Booster, Wheel assembly, air tank, control valve etc
Suitably sectioned and mounted on a sturdy iron frame.
(Input Voltage 220 V, Cutting Current 5 - 40 Amps, Max. Thickness of the
sheet for cutting 12 mm, Air Pressure required 3. 5 - 5 Bar)
500
800
600
600
600
800
1,600
500
500
800
800
1,200
2,000
Page 31
213.
Starter /
test bench
214.
Fuel injection pump
test bench
215.
Injector cleaner &
tester
with
specifications like
Battery charger
216.
217.
218.
219.
220.
alternator
Model of fuel injection
pump-inline type
Demonstration board
of fuel supply system
of diesel engine
Demonstration board
of electronic ignition
system
of
an
automobile 4 wheeler
(working)
Instruction board for
charging system
(i) Motor 2 hp three phase 1500rpm(ii) Digital dc voltmeter of 3.5 digit
display with minimum readable upto 0.1 volt (iii) Digital dc ammeter for
load of 3.5 digit display with minimum readable upto 1 amp (iv)
Digital make rpm indicator 0-5000rpm(v) Speed sensor for sensing starter
speed (vi) Alternator loading through wire wound resistors of 0-50 amps
capacity (vii) Alternator loading through 4nos rotary switches. (viii)Two
directional rugged mounting arrangement to suit
various range of alternators.(ix) Provision for two speed check with two set
of pulley and belts(x) Starter free spin testing upto 100amps capacity.(xi)
110 v series lamp test facility
(Drive Belt, No. of Cylinders 6 , Motors 3.7 KW for main drives & 0.7 KW
for Fuel supply, Tachometer Digital Electronic 0 – 9999 RPM with
electronic Timer, Strokes Electronic automatic: 100 – 1200 shots per minute,
Speed Range 100 – 3000 RPM, Phasing High Pressure Phasing (standard),
Pressure Gauges Two (for fuel supply & high pressure phasing), Speed
control Fully controllable from both sides, Capability Inline & Rotary Pumps
testing)
(i). Suitable for cleaning 4 Injectors simultaneously
(ii). Ultra Sonic Bath tub as standard supply
(iii) Uniformity test, Spray test, Leakage test and Auto test
(Short Circuit shutdown without blown fuse,
Reverse Polarity Protection, 3-stage charging: CI-CV-Float)
6 cylinder type fuel injection pump-inline type
2,000
This demonstration board consists of cut sectioned used parts such as Fuel
tank, Filter, Fuel Injector with Automiser, etc., to show the Fuel supply
system
This open demonstration working unit is made out of original used parts
such as switches, Electronic ignition coil, Distributor, four spark plugs and a
battery for power source, with necessary wiring connections. By switching
on the switch and by giving rotation to the Distributor, Sequential Sparks in
the spark plugs can be demonstrated.
The Instruction board adopts the real components of charging system to
illustrate charging system structure and working principle. The components
are rigged onto colour circuit diagram. And made functional.
Features
1. Real and operatable Charging system such as alternator, meters etc is
assembled onto a colour printed board to illustrating the structure and
working process.
2. The alternator will be coupled electric motor, and the necessary
electrical circuitry will be provided along with warning lamp, ignition
switch, voltage meters etc., to demonstrate the working of charging
system.
3. And exploded view arrangement of an alternator assembly will be
displayed on the board.
4. Coloured circuit diagram on the training Module printed on to 6mm
organic glass base. Where in the students can compare the diagram and
actual diagram.
5. Detection terminals for operator to detect various sensors, actuators,
electrical signals for engine control unit, such as resistive, voltage,
current, frequency and wave form signals are provided on to the printed
circuit diagram.
6. Fault setting switch bank will be provided to induce faults in the training
module to demonstrate the fault and to diagnose faults.
7. Set the line break, grounding short circuit, improper contact or open
600
1,500
1,200
500
Nil
1,600
1,600
Page 32
8.
221.
Instruction board for
electronic
fuel
injection system of
gasoline engine.
(MPFI)
222.
Instruction board for
electronic
fuel
injection system of
diesel engine.
(CRDI)
circuit faults can be induced; user can adjust the number and type of
faults.
The training module is fabricated using steel pipe frame with spray
painted for good looks and the entire setup is provided with caster
wheels with brakes for easy movement of the same.
The Instruction board adopts the real components of electronic fuel injection
system to illustrate engine fuel system structure and working principle. The
components are rigged onto colour circuit diagram. And made functional.
Features
1. Real and operatable engine fuel injection system is assembled onto a
colour printed board to illustrating the structure and working process.
2. Coloured circuit diagram on the training Module printed on to 6mm
organic glass base. Where in the students can compare the diagram and
actual diagram
3. Detection terminals for operator to detect various sensors, actuators,
electrical signals for engine control unit, such as resistive, voltage, current ,
frequency and wave form signals are provided on to the printed circuit
diagram.
4. The training module is fitted with diagnostic socket (DLC) for universal
automobile decoder (Scan tool) to read fault codes, clear fault codes and read
data stream.
5. Fault setting switch bank will be provided to induce faults in the training
module to demonstrate the fault and to diagnose faults.
6. Set the line break, grounding short circuit, improper contact or open
circuit faults can be induced, user can adjust the number and type of faults.
7. Good working condition Parts will be provided with fuel tank. The
instruction board has to be connected to 220V AC socket Which changes to
12V DC internally so that the board works without battery.
8.The training module is fabricated using steel pipe frame with spray painted
for good looks and the entire setup is provided with caster wheels with
brakes for easy movement of the same.
The Instruction board adopts the real components of electronic fuel injection
system( CRDI) to illustrate engine fuel system structure and working
principle. The components are rigged onto colour circuit diagram. And made
functional.
Features
1. Real and operatable engine fuel injection system with partial engine block
is assembled onto a colour printed board to illustrating the structure and
working process .
2. Coloured circuit diagram on the training Module printed on to 6mm
organic glass base. Where in the students can compare the diagram and
actual diagram.
3. Detection terminals for operator to detect various sensors, actuators,
electrical signals for engine control unit, such as resistive, voltage, current,
frequency and wave form signals are provided on to the printed circuit
diagram.
4. The training module is fitted with diagnostic socket (DLC) for universal
automobile decoder (Scan tool) to read fault codes, clear fault codes and read
data stream.
5. Fault setting switch bank will be provided to induce faults in the training
module to demonstrate the fault and to diagnose faults.
6. Set the line break, grounding short circuit, improper contact or open
circuit faults can be induced, user can adjust the number and type of faults.
7. Good working condition Parts will be provided with fuel tank. The
instruction board has to be connected to 220V AC socket Which changes to
2,500
2,500
Page 33
223.
Instruction board for
starting system
224.
Training module for
the crdi diesel engine
with common rail
direct fuel injection
system
12V DC internally, so that the board works without battery.
8. The training module is fabricated using steel pipe frame with spray
painted for good looks and the entire setup is provided with caster wheels
with brakes for easy movement of the same.
The Instruction board adopts the real components of Starting system to
illustrate Starting system structure and working principle. The components
are rigged onto colour circuit diagram. And made functional.
Features
1. Real and operatable starting system such as Starter motor, ignition switch etc
is assembled onto a colour printed board to illustrating the structure and
working process .
2. The Starter will be connected to a battery, and the necessary electrical
circuitry will be provided along with ignition switch, voltage meters etc., to
demonstrate the working of charging system.
3. And exploded view arrangement of an starter motor will be displayed on the
board.
4. Coloured circuit diagram on the training Module printed on to 6mm organic
glass base. Where in the students can compare the diagram and actual
diagram.
5. Detection terminals for operator to detect various sensors, actuators,
electrical signals for engine control unit, such as resistive, voltage, current,
frequency and wave form signals are provided on to the printed circuit
diagram.
6. Fault setting switch bank will be provided to induce faults in the training
module to demonstrate the fault and to diagnose faults.
7. Set the line break, grounding short circuit, improper contact or open circuit
faults can be induced, user can adjust the number and type of faults.
8. The training module is fabricated using steel pipe frame with spray painted
for good looks and the entire setup is provided with caster wheels with
brakes for easy movement of the same.
The trainer should help to simulate engine startup, speedup, slowdown and
other actions so as to illustrate the structure and working principle of CRDI
engines.
Features
1. Real and operating CRDI Diesel engine, illustrating the structure and
working process.
2. Coloured circuit diagram on the training Module printed on to 6mm organic
glass base..
3. Detection terminals for operator to detect various sensors, actuators,
electrical signals for engine control unit, such as resistive, voltage, current,
frequency and wave form signals are provided on to the printed circuit
diagaram.
4. Automobile meters are fitted on to the training module along with the printed
circuit diagram, to demonstrate engine speed, temperature, fuel pressure,
charging light etc.,
5. The training module is fitted with diagnostic socket (DLC) for universal
automobile decoder(Scan tool) to read fault codes, clear fault codes and read
data stream.
6. Fault setting switch bank will be provided to induce faults in the training
module to demonstrate the fault and to diagnose faults.
7. Good working condition engine will be provided with fuel tank and battery.
Throttle control is provided on the module to accelerate.
1,000
5,500
The training module is fabricated using steel pipe frame with spray painted
for good looks and the entire setup is provided with caster wheels with
Page 34
225.
Training module for
the mpfi petrol engine
with multi point fuel
injection system.
226.
Training platform for
abs brake system –
(antilock
braking
system).
brakes for easy movement of the same.
The trainer helps to simulate engine
startup, speedup, slowdown and other actions so as to illustrate the structure
and working principle of MPFI engines.
Features
1. Real and operating Petrol MPFI engine, illustrating the structure and
working process.
2. Coloured circuit diagram on the training Module printed on to 6mm
organic glass base.
3. Detection terminals for operator to detect various sensors, actuators,
electrical signals for engine control unit, such as resistive, voltage, current
frequency and wave form signals are provided on to the printed circuit
diagram.
4. Automobile meters are fitted on to the training module along with the
printed circuit diagram, to demonstrate engine speed, temperature, fuel
pressure, charging light etc.,
5. The training module is fitted with diagnostic socket (DLC) for universal
automobile decoder (Scan tool) to read fault codes, clear fault codes and read
data stream.
6. Fault setting switch bank will be provided to induce faults in the training
module to demonstrate the fault and to diagnose faults.
7. Engine should be provided with fuel tank and battery. Throttle control is
provided on the module to accelerate.
8. It is fabricated using steel pipe frame with spray painted for good looks
and the entire setup is provided with caster wheels with brakes for easy
movement of the same.
The device is designed on the ABS system, where in the principle of
operation and working of the same can be demonstrated. A parts and
accessories are arranged on to a Colour printed board. And the system is
made functional.
Features
1. Real and operatable ABS brake system is assembled onto a colour printed
board to illustrating the structure and working process.
2.The front and rear Disc Brake with callipers are coupled to two different
three phase motor with electric drives to rotate the front disc and rear disc
separately. A brake Pedal along with vacuum booster is connected to the
Front calliper system and rear drum brake system, a vacuum pump will be
connected to the booster to demonstrate the effect of vacuum in the pedal
operation.
3.The Device is connected with Pressure meters to demonstrate the different
pressure at different locations in the brake system.
4.Coloured circuit diagram on the training Module printed on to 6mm
organic glass base. Where in the students can compare the diagram and
actual diagram.
5.Detection terminals for operator to detect various sensors, actuators,
electrical signals for engine control unit, such as resistive, voltage, current ,
frequency and wave form signals are provided on to the printed circuit
diagram.
6.The training module is fitted with diagnostic socket (DLC) for universal
automobile decoder (Scan tool) to read fault codes, clear fault codes and read
data stream.
7.Fault setting switch bank will be provided to induce faults in the training
module to demonstrate the fault and to diagnose faults.
8.Set the line break, grounding short circuit, improper contact or open
circuit faults can be induced, user can adjust the number and type of faults.
9.Good working condition Parts will be provided with fuel tank. The
5,000
4,000
Page 35
227.
Digital pressure gauge
228.
Pitot tube thermo
anemometer
Digital viscometer
229.
230.
Spot Welding System:
Light
weight
C
Clamp, X gun and
manual gun for single
sided
and
stud
welding operation.
231.
Butt Welder
232.
ARC
Machine
233.
Heavy Duty Universal
Wood
Working
Machine
234.
Wood Band Saw
235.
Multimeter
Welding
instruction board has to be connected to 220V AC socket Which changes to
12V DC internally, so that the board works without battery.
10.The training module is fabricated using steel pipe frame with spray
painted for good looks and the entire setup is provided with caster wheels
with brakes for easy movement of the same
(micro processor controlled, high resolution with LCD display, 4” dial,
accuracy: +/- 0.1% F.S., range: 0-20 kg/cm2
(range: 2-100 m/s, operating temp: -5 to 50 C) with probe length: 30 cm
( LED display. Measurement range is 10-1 x 105 MPA.S with 4 spindles,
6/12/30/60 rotor speed (rpm), + 5 % newtonian fluid. Provided with RS-232c
interface)
Technical Specifications
 Input Voltage : 380V A.C, 2 Phase
 Input Power : 26.8 KVA
 Input current : 60 A
 Instant /max Current : 9900 A
 One Sided welding thickness: 1.0 + 1.5mm
 Double Side welding thickness : 2.5 + 2.5mm
 Operating way : Electronic Timer continuity.
 Input Gas Source pressure : 6-10 kg/cm2
 Power cable length : 2500+2500, 2300 +1900 mm.
Vacuum Suction: 180 kg.
(6 KVA, 220-240 single phase/ two lines of three phase) Max. Dia of wires
weldable (Steel: 5 mm, Copper: 4 mm, Aluminium: 5 mm), Aluminium
wires weldable steel (Steel: 2 mm, Copper: 2 mm, Aluminium: 2.5 mm, Nos.
of adjusting: 8 Taps) and all necessary accessories like (i) Extended
annealing jaws from 4" to 10" (ii) Separate heat regulator for annealing with
foot switch (iii) Annealing time will be control automatically by providing
an electronic timer. (iv) Lighting lamp with flexible stand.
(Nominal Current Output: 150 Amp, Primary Voltage: 230/415 V, Phase: 1
& 3, Frequency: 50 Hz, Open Circuit Voltage: 50 Hz, Max. Cont. Hand
Welding Current at 60% Duty Cycle: 120, Max. Cont. Automatic Welding
Current@100% Cycle: 90, Welding Electrode size Min.: 1.6 mm, Welding
Electrode size Max.: 3.15 mm)
(3 HP, Thicknessers: Thicknessing: 10-285 mm, Thicknessing feed rate per
min: 5m/min 15m/max, Planner Jointer: Planning Width: 300 mm,
Maximum rebate size: 100 mm,Moulding attachment: Table travel vertical;
125 mm,Table travel internal: 100 mm, Table travel feed: 100 mm, Circular
Saw: Saw Max dia: 300 mm, Saw bore: 200 mm, Boring M/C & Mortising
attachment: Table Travel Vertical: 125 mm, Table Travel Parallel:100 mm,
Table Travel Feed: 10 mm, Wood Lathe:Centre height: 125 mm, Admit b/w
centres: 600 mm, Emery wheel size: 150 x 15.199 mm, Emery wheel speed:
1700 & 3000 rpm, Disc Sander: Disc dia: 240 mm, Disc speed: 1700 & 300
rpm, Belt Sander: Length of belt: 110 mm, Width of belt: 100 mm)
(12 inch , Motor power: 1hp, Saw wheel diameter: 315mm, Table pivot
capacity: 0-45º, Processing scope: max height 160mm, Max width 300mm,
Length of saw blade: 2240mm, Line speed of saw blade: 12;6m/s, Table
size: 500x400mm, Dust extraction outlet: 100mm, N.w./g.w.: 77/83kg,
Dimensions: 1100x500x415mm, Quantity per 20ft/40ft container:
110pcs/230pcs)
Power Supply: : 100 V/120 V/220 V/240 V ±10%
Power Line Frequency: : 45 Hz to 66 Hz and 360 Hz to 440 Hz,
Automatically sensed at power-on Power Consumption: 25 VA peak (10 W
average). Operating Environment: Full accuracy for 0°C to 55°C, Full
600
2,000
1,500
2,000
2,000
1,500
4,000
2,000
1,000
Page 36
236.
Benchtop Digital 6½
Digit Multimeter
237.
Benchtop Digital 5½
Digit Multimeter/ DC
power Supply:
238.
Handheld
Multifunction
Calibrator/Meter
239.
Multistage centrifugal
pump test rig
240.
Reciprocating
Test Rig
241.
Apparatus for Cd, Cv
of orifices & CD of
Mouthpiece
Pump
accuracy to 80% R.H. at 40°C
(color graphical display with trend and histogram charts, Truevolt
measurement performance and 100% 34401A system compatibility.
Measurements: DC & AC volts, DC & AC current, 2- & 4-wire resistance,
Frequency & period, Continuity & diode, Temperature, DC Accuracy:
0.0035 %, Reading Speed: 1000 rdgs/s, Connectivity: GPIB, LAN/LXI,
USB)
(DC & true RMS AC voltage and current, 4-wire resistance, capacitance, and
diode test. 30-W dual-range output 30V/1A and 8V/3A with OVP/ OCP,
auto scan /ramp, and square-wave generator. Measurements: DC & AC
volts, DC & AC current, 2- & 4-wire resistance, Frequency & period,
Continuity & diode, Capacitance, Diode test, DC Accuracy: 0.025 %,
Reading Speed: 37 rdgs/s, Connectivity: GPIB/USB, Output Features:
Single-output dual range of 30V/1A or 8V/3A, 0.01% + 3mV load
regulation, OVP and OCP, 4.8kHz Square-wave generator, auto ramp and
scan capability, Other features: Built-in GPIB (IEEE-488) and USB 2.0 full
speed interface, SCPI language compatible, Universal AC input (100V 240V, 45Hz to 66Hz), Kensington lock slot to prevent theft or
misplacement)
(DC & AC current, 2- & 4-wire resistance, Frequency & period, Continuity
& diode, Temperature, Voltage, Diode test, Pulse width, Duty cycle. DC
Accuracy: 0.03 %, Reading Speed: 3 rdgs/s, Connectivity: IR-USB) with 420 mA and 0-20 mA percentage scale readout , 50000 count true-RMS
DMM and Built-in battery charging capability
a) The test rig consists of a 2-stage centrifugal pump set suitable for
determining its characteristics at its rated speed. The test centrifugal pump is
of 1.0 HP capacity of size 25mmx25mm(1"x1"). The pump is powered by
220 volts, single phase, 50Hz. A stop watch and an M.S. collecting tank of
size 150 liters. with a gauge glass scale fitting, a drain valve and a bend are
provided to measure the actual flow rate. An energy meter is provided to
measure the input power to the pump set.
b) Other standard accessories include switch, flow control gate valve, foot
valve and piping system with suitable pressure taps to fix the pressure and
vacuum gauges.
c) A sump tank of size 250 liters with suitable drain is provided to store the
water. A strong iron stand fitted with wheels supports the complete test rig.
The unit is moveable. All tanks are provided with FRP lining for total rust
protection. A technical manual accompanying the unit.
a) The test rig consists of a reciprocating pump set suitable for determining
its characteristics such as the efficiency and input power at various head and
discharge. The test pump is of size 25mmx20mm(1"x3/4") and is driven by
a 1.0 HP single phase 220Volts, 50Hz electric motor. A stop watch and an
M.S. collecting tank of size 90 liters. with a gauge glass scale fitting, a drain
valve and a bend are provided to measure the actual flow rate. An energy
meter is provided to measure the input power to the pump set.
b) Other standard accessories include switch, flow control gate valve, foot
valve and piping system with suitable pressure taps to fix the pressure and
vacuum gauges.
c) A sump tank of size 250 liters with suitable drain is provided to store the
water. A strong iron stand fitted with wheels supports the complete test rig.
The unit is moveable. All tanks are provided with FRP lining for total rust
protection. A technical manual accompanying the unit.
a) Apparatus consists of an M.S. supply tank of size 0.3mx0.3m and 0.8m
height with an inlet diffuser for damping flow oscillations, an overflow
outlet, a gauge glass scale fitting, a drain cock and a provision for fixing
interchangeable orifice plates and mouthpieces. A modified hook gauge
1,500
1,000
500
2,500
2,000
2,000
Page 37
242.
Appratus
Venturimeter
Orificemeters
243.
Submersible
Test Rig
244.
Apparatus for Study
of Cavitation
of
and
Pump
with a suitable scale sliding apparatus is provided to measure the x-y
trajectory of the jet. Two standard orifices of size 10mm. and 12mm and
four mouthpieces with l/d = 2.5, and 4, Bourda mouthpiece, and converging
diverging mouthpiece are provided for conducting the experiments. A stop
watch and an M.S. collecting tank of size 45 liters. with a gauge glass scale
fitting, a drain valve and a bend are provided to measure the flow rate.
b) A 220 volt AC, 0.5 HP, single phase monoblock ISI pumpset with
suitable pipe fittings, strainer foot valve, and switch is provided to supply
water to the test rig.
c) A sump tank of size 250 liters with suitable drain is provided to store the
water. A strong iron stand fitted with wheels supports the complete test rig.
The unit is moveable. All tanks are provided with FRP lining for total rust
protection. A technical manual accompanying the unit.
a) The test rig consists of a GI pipe line fitted with a set of gunmetal
venturimeter and orificemeter of size 25mm(1"), and of d/D Ratio = 0.6.
The flow meters are provided with pressure tappings with quick change over
cocks. A differential manometer (without mercury) is provided to measure
the pressure difference across the venturimeter/orificemeter to be tested. The
pressure tappings are connected to a common manifold which in turn is
connected to the manometer. A strong iron stand is provided for supporting
the pipe lines. A stop watch and an M.S. collecting tank of size 90 litre.
With a gauge glass scale fitting, a drain valve and a bend are provided to
measure the actual flow rate.
b) A 220 volt AC, 0.5 HP, single phase mono block ISI pump set with
suitable pipe fittings, strainer foot valve, and switch is provided to supply
water to the test rig.
c) A sump tank of size 200 liters with suitable drain is provided to store the
water. A strong iron stand fitted with wheels supports the complete test rig.
The unit is moveable.
All tanks are provided with FRP lining for total rust protection
A technical manual accompanying the unit.
a) The test rig consists of an open well submersible pump suitable for
determining its characteristics. The test pump is driven by a 1.0 HP single
phase 220Volts, 50Hz electric motor. A stop watch and an M.S. collecting
tank of size 150 liters with a gauge glass scale fitting, a drain valve and a
bend are provided to measure the actual flow rate. An energy meter is
provided to measure the input power to the pump set.
b) Other standard accessories include switch, flow control gate valve, foot
valve and piping system with suitable pressure taps to fix the pressure and
vacuum gauges.
c) A sump tank of size 250 liters with suitable drain is provided to store the
water. A strong iron stand fitted with wheels supports the complete test rig.
The unit is moveable. All tanks are provided with FRP lining for total rust
protection. A technical manual accompanying the unit.
a) It consists of a high discharge 5HP monoblock centrifugal pump (440
Volts, 3 Phase) pumping water from an MS tank of 400 liters capacity
through an orificemeter, a transparent venturimeter and suitable flow control
valve back into the tank in a closed circuit form.
b) The venturimeter is machined from a solid acrylic block and is provided
with pressure taps at the inlet and throat sections. When the flow rate is
increased the static pressure at its throat is decreased and when this equals
the vapour pressure, cavitation begins. At this point, visual observation of
the inception and growth of the cavitation accompanied by the rattling noise
can be observed at the transparent throat.
c) A pressure gauge and compound gauge is provided to measure the
pressure at the inlet and throat of the venturimeter during cavitation. A set
2,000
2,000
2,000
Page 38
245.
Autoclave
(Horizontal)
246.
247.
Iron rack/ Book shelf
Digital
Platform
weighing scale
Electrical
Conductivity
(EC)
Meter
248.
249.
Digital pH Meter
250.
Flame Photometer
251.
Distillation
Assembly
252.
Double Distillation
Assembly
256.
257.
258.
Sedimentation
cylinder
Mortar and Pestle
Munsell Colour
Chart
G.P.S. Device
Sieve Set
Soxhlet Apparatus
259.
Deionizer
253.
254.
255.
260.
261.
262.
263.
264.
of pressure gauges are also provided for the orificemeter to measure the flow
rate. Other accessories include switch, starter for the pump and suitable
piping and regulating valve.
All tanks are provided with FRP lining for total rust protection
A technical manual accompanying the unit.
Double walled, stainless steel, Radial locking system with pressure gauge,
safety device pressure 22 p.s.i. Automatic vacuum breaker, Dimension: 750
mm x 550 mm, 30” x 22”, capacity: 152 lit.
Two sided space having at least 6 shelves on each side
Capacity – 150 kg; Accuracy – 20 g; Platter size – 600 x 600 mm; LED
display, Inbuilt rechargeable battery, stainless steel
3 – ½ digit LED display, auto temp. compensation measuring range
conductance 0.01 us/cm to1000 mS/cm in 5 range 200uS, 2M, 20M, 200M,
!000M, measuring range resistance 0.1 ohm to 2 mega ohm in 5 range;
Accuracy + 1 % FSD, Cell constant value 1.0
Range: 0 – 14, Accuracy: + 0.01, 3.5 digit LED display with auto
temperature compensation, gel filled epoxy body combination, pH electrodes
and RTD probe with recorder output and slope control facility.
9,000
Nil
500
500
500
Range: Na, K & Li: 1-100 ppm and Ca: 15-100 ppm
Sensitivity: Na, K & Li: 0.5 ppm and Ca: 15 ppm; Linearity: <3%
Reproducibility: 2% CV for 20 samples; Detector: Photo cell
Ignition System: Manual; Flame System: LPG & dry oil free air;
Automiser: Axial flow type; Power supply: 230VAC±10%, 50 Hz
Flask capacity: 5 litre, Automatic low water cut off device in case
water supply is stopped; Special grade rubber tubing (10m coil)
Out put capacity: 2 litre/ hr; Electrical power required: 220/240 V,
Single phase, 3.5 KW heater; Cooling water consumption:65 litre;
Quartz distiller; Demountable boiler Compact design, Dual safety cut
out; High purity; Low conductivity, Pyrogen free distillate
1 litre mark
Pores size 4, 2, 1, 0.5, 0.25, 0.10 and 0.62 mm diameter
Extractor socket: 250ml, 45/40; Extractor cone: 29/32; Flask: 500 ml
Capacity: 10 gallon/ minute
Sump Tank: 75 gallon polypropylene tank
Pressurizing Pump: Stainless steel turbine,11/2 HP, Three Phase,
50/60Hz, 15 Amps, TEFC,IEC magnetic starter
Double RO system
Millipore
Water Purifier
Water Purifier
Gel Drier
Computer along with Accessories and suitable software
Gel Documentation
System
Fume hood for plant Dimensions (WXDXH Approx.) mm: 1200 X 750 X 1600, Exterior: SS
41plate 1.2t (epoxy powder coated), Interior: Trepsa, Windows and
molecular biology
Sash: Safety clear glass 5t & A1 sash, Cabinets for acids/bases and
laboratory
Page 39
organic solvents
268.
Rice Polisher
Sample Divider(
Boener Type)
Rice Miller
Rice Huller
269.
Vacuum Emasculator
270.
Portable pH Meter
265.
266.
267.
271.
272.
273.
Seed purity Work
Board
Different types of
seed sampler
Computerized Hot air
Seed Dryer – Cabinet
Type
274.
Seed/Grain Image
Analyser
275.
Digital Callipers
276.
Seed Germinator
277.
Seed Air-Screen
Cleaner cum Grader
Complete cleaning facility ad suitable for polishing Brown Rice
1 kg,3 kg Capacity made of brass
Set of 20 disposable Glass tubes, pressure-guage and high capacity
vacuum pumps powered by Crompton motor
Resolution: 0.1pH
Accuracy(@20C/68F): 0.1 pH
Calibration: manual, 1 or 2 point
Battery operated
Size:50x 28x 10 Ht.cms( Made of teak wood for longer life)
Drawer capacity: 930CC9approx.)
Sampling Trier Double Tube Spear Type
For drying of seed grains,cereals,pulsed & oilseeds
Fast and Easy Menu Driven
Scanning unit with resolution of 200 dpi
The images save in bitmap (dmp)
Should have powerful statistical analysis software
Should count the grains & analyse the colour
Capable of displaying Grain pictures
Origin setting without repeated Zero setting
Whenever power on, the display will always show the current exact
measurement
No limit of moving speed
Auto power on(move caliper slider),auto power off (5 min after using)
Low power consumption with long battery life(>2.5 years)
Used for germination of seed samples
Fully programmable for light & temperatue
Data storage capacity (1000 readings)
16x 2 line alphanumeric LCD display
Audio visual alarm
Display panel in the door
3 screen model
Large screen area
Powerful aspiration fan
Brush type screen cleaning
Page 40
278.
Specific Gravity
Separator
279.
Seed Analysis Kit
280.
Broken Separator
281.
Seed Testing Dryer
282.
Precision divider
283.
Digital Moisture
meter
284.
Compact Universal
Digital Data Logging
Moisture meter
285.
Seed Grain dividerBoerner type
286.
Seed Grain DividerGamet type
287.
Seed Grader Lab
Model
Minimum level of vibration and power requirement
Deck Inclination in both direction
Excellent and easy wheel arrangement for individual air control of each
blower
Dynamically balanced blowers to avoid noise and vibration
The unique oscillating plates design gives trouble free performance
Comprises of 1 No. Dispensing Balance, 1 No. Hand Magnifier (4"
dia), 1 Set of Parkhi (9", 12" 14"), Scoop Set, 1 No. Enamelle Plate
(12" Dia), 1 No. Palm husker, Measuring Cylinders (10 cc, 50 cc, 100
cc), 1 No. Brass Seed caliper, 1 No. Petri dish packed in compact brief
case specially designed for Seed/Grain inspectors
Four Tray of indent size3.5,3.97,4.5,4.8 in mm &one collecting plate
with a nice pouch
Each box is made up of stainless steel having dimension 5’x 5’x 8 ten
boxes are snugly fitted in a powder-coated sturdy cabinet. Separate
controller for 10 boxes
Size: 38x31x51cm (appox.)
Hopper Capacity: 2 Kg Power 0.5 H.P Single Phase
Principle: Centrifugal Action, Motor Driven
Basic Agro Model
Instant Moisture percentage reading by pressing a switch
Weight 9.5 kg
Body made of steel
Test cup visible while giving pressure
Seven digit LED display
PT- 100 temperature sensor with temperature indication
RS 232 port for printer/ computer
International Model with 38 openings
BrassBody
Especially for free flowing grain lots
Meets with FCI specifications
Two brass sample pans extra
No electric requirement & easy operation
Used for rough glumes & Sticky seed lots
Motor driven with centrifugal action
Rotating neoprene disc
Stainless steel body
Especially designed for Lab use
Suitability for all cereal grains, pulses, oilseeds etc.
Adjustable feed rate & blower speed
Fraction separation
Two screen system
Different fractions & impurities are collected from different spouts
Page 41
288.
Computerized seed
counter
289.
Laboratory Aspirator
–Bates types
290.
Seed Blower _
Dacota type
291.
Rice Huller with Mc
Gill type
292.
Rice polisher lab
Model
293.
Rice sheller
294.
Horizontal Centrifuge
Normal Shaker for
Eppendorf tube
295.
Work even without electricity
16x 2 line alphanumeric LCD display
Micro controller based
Computer/ printer attachment
Membrane keyboard
Count maximum upto 999999 seed in lot
Range 1 to 15 mm
Slow start and slow stop provided for better accuracy
Soft touch speed control no knob required
For separation of light chaffy material from granular product
Fast & accurate
Separate detachable transparent collector
Feed rate controller &controlled air flow
Triangular pan
Large hopper capacity
Used for Purity testing, docking & cleaning of grains
Robust, fast & Mobile
Timer facility
Blower speed controller
Effective for small lots of seed
Wire mesh at bottom prevents seed falling into fan
Three sets of imported transparent tubes
For milling small samples to get polished rice
Fast ,accurate and reliable
Time & money saver
Portable design
SS pressure cover & weight level assembly
Timer facility
Sample capacity: 800 Gm Approx.
Power required: 0.50 H.P single phase
Dimensions:600x400x400 mm(LXBXH)
For dehusking paddy to get brown rice(approx. 20% husk)
Consists of one rubber roll & one steel roll (cutter)
Page 42
List of required instruments and estimated price for laboratory of different
Departments at B.P.S.A.C., Purnea
Source of Fund-Joint Secretary, Agriculture, Govt. of Bihar Letter No. 3499 Dt.
10.07.2015
Sl.
No
Name of Equipments
( Company/ Brand)
Qty.
Details(Specification)
Department of Horticulture
1. D Electronic Balance
1
Single pan Electronic balance
Capacity – 200gms,
Readability – 0.1 mg,
Sensitivity – 0.1 mg
2.
Water distillation unit
1
3.
Laser Leaf Area meter
1
4.
Plant canopy Analyzer
1
5.
Hot Air oven
1
Size-300 litre capacity,
Temperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric
power -220 V AC, Display- LCD display for set value and process
value, voltage indicator - digital volt meter, illumination—Fluorescent
lamp
6.
7.
Varnier caliper
1
1
Digital measure-01mm to 10 mm, Stainless steel made
Grinder machine
Mono quartz distillation unit, panel quartz boiler and
borosilicate condenser vertical model, output capacity 2.5
liter/ hr
Cl-203, Maximum width, perimeter average and
accumulated area, Precision -1%, Resoluation-0.065 mm,
Memory-2000 data set, Dsplay-64x240 pixel graphic
display , Battery operated
LP-80, Measuring leaf area index, PAR beam transmission
coefficient, Diffusion radiation transmission coefficient ,
Measuring time 1 second, Fish eye lens angle: 1600-1800
image, Resolution :700:500,Pixels Probe size 20x20 mm
Steel, ½ hoarse motor operated, Electric power -220 V AC,
Chamber fitted with hopper three delivery stainless steel sieves-20,40
and 60 mes
8.
Chlorophyll content meter
1
Measure parameter : CCl Value: measuring area: 1 cm
diameter, Resolution :0.1 CCl unit
9.
10.
11.
Penetrometer of fruits
Viscometer ( Brook Field)
Digital Hand Refractometer
1
1
01
0.2 -4.0 kg pressure, Handy, Pressure gage meter
Min range-15 Cp, Borosilicate glass martial
Refractive index reading range-13330-14465, Refractive index
reading accuracy -0.0002, Brix reading accuracy 0.2, Brix
reading range- 0.0to 62 %, Calibration water prism material
glass,
Digital
12.
Digital pH meter( Systronic)
1
Range : 0-14.00 pH
Resolution : 0.01pH
Permeability : + 0.01 pH + 1 digit Display- LED display, Electric power
-220, Stability : 0.01 pH per hour
13.
Spectrophotometer( Systronic)
1
Graphical display, Light source-Xenon lamp, Wavelenthrange-
Page 43
190-900 nm, Electric power -220 V AC
14.
Flame photometer with motor
( ELICO)
1
Sensitivity :
Element
Na
K
Ca
Mg
Ppm
0.1
0.1
0.1
0.1
1-100
1-100
1-100
1-100
Li
0.5
Range
Ppm
1-100
Linearity
In %
-------------- better than 2 %----------------------
Reproducibility
In %
------- 1 % CV for 100 consecutive sample-----
Lame System
LPG & Oil free dry air , Electric power -220 V AC
Entomology Apartment
A. Entomology +Nematology Equipments
Single top pan Electronic balance
15.
Electronic
Balance/
Chemical Balance
02
16.
17.
Insect collecting net
40
02
Model RI-69-06, Aluminum handle, Folding ring,
Universal infinity system with antifungal treatment providing
image flatness 10X (FN10) paired eye picce plan achromatic
objective 4X, 10X,40X and 100X seidentopf observation head,
observation tube 30 o incline interpupillary distance adjustment
range 40-75mm 6 v 20w halogen bulb
18.
Incubator
1
Temperature range-5 to 60 0c, Humidity range-5% above ambient from
40 to 95 % RH, Temperature accuracy- +- 10c, Electric power -220 V
AC, Display- LCD display for set value and poess value, voltage
indicatore - digital volt meter, illumination—Fluorescent lamp
19.
Insect showcase
small (RI-64)
4
20.
21.
22.
Weight box
Power sprayer cum duster
Zooplankton net
2
01
02
Size 45x30x6.5 cm (RI-6-02), Cabinet frame of plywood with
melamine lamination, Hinging door is provided with lock and
handle
Set of box with milligram small box
10 liter capacity, power operated dusting
23.
24.
Knapsack sprayer
Insect Storage box (RI-61)
2
50
25.
Insect Display Showcase
(RI-63-01)
02
26.
Zooplankton net (RI-70-03)
06
10 liter cap
Teakwood frame with melamine laminated on top and MDF
sheet at bottom is polished. Top and bottom lined with 8 mm
thick soft pining wasable EVA sheet, Box size-53x45x9cm
Size 90x60x11cm, MDF frame with MDF sheet bottom and
glass top is nicly polished, Bottom lined with 8 mm thick EVA
sheet
80/150/250 mesh size
27.
Insect killing Jar
(RI-72-07)
Compound microscope with
50
RI-72-07, 2 liter capacity
2
Olympus, Precise graduated slow motion reading to .002 mmm,
28.
Stereo Zoom Microscope
(RI-90-01) Olympus
cabinet
Capacity – 200gms, Readability – 0.1 mg, Sensitivity – 0.1 mg,
Plankton net, Diameter entrance: 130mm, ring diam-180,
includes bucket meshes and front demountable, available in
4 size: 63,80,153, 243um, Big bag
Page 44
Eyepieces WF 101x and 15 X two nose, Objective-10x, 45x and
100x (SL) oil immersion
image analyzer
29.
30.
31.
Altimeter (RI-72-08)
Dissecting tray
Insect stretching board
1
40
40
RI-72-08, Round , dial type, range 0-5000 meter
With wax standard size
32.
33.
25
50
Magnifying of small insects 10X
Insect morphology and anatomy samples for identification
34.
Magnifying glass
Permanente slide with slide
box
Refrigerator
01
Temperature range-2 to 15 0c,Temperture accuracy- +- 0.50c, Electric
power -220 V AC, Display- LCD display
35
38.
Insect dissecting box
Metallic sieves BSS
10
06
39
40
41
42
43
44
45
46
47
Aspirator
Wrinkle bag
Malaise trap
Window trap
Pit fall trap
Yellow pan trap
Yellow sticky trap
Pheromone trap
Light trap
02
02
02
02
02
02
06
06
01
Sesser, Brush, Razor, Slide, etc
BSS 20 mesh, 60 mesh, 100 mesh, 350 mesh, 400 mesh and 500
mesh seives
For collecting small insects
For collection of soil insect
For collection of insect
For collection of insect
For collection of insect
For collection of insect
For collection of insect
For collection of insect
For collection of insect
Total A
Langstroth bee hive
Hive tool
Hive stand
Uncapping knife
Honey extractor
Comb foundation meal
Smoker
Bee veil
Queen excluder
Queen kage
Queen cell protector
Gloves
Dummy/ division board
Feeder
Drone trap
Comb foundation sheet
Swarm bag
Queen gate
04
1
03
01
01
01
01
10
03
03
03
03
02
03
01
1kg
01
03
Size 90x60x11cm, MDF frame with MDF sheet bottom and
glass top is nicely polished, Bottom lined with 8 mm thick EVA
sheet
Capacity-250 lit
Apiculture Equipment
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
Full set including super
_____
_____
_____
Five Frame
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
Page 45
66
67
68
69
70
71
72
73
74
75
76
Ant barrier
Bee brush
Entrance guard
Propalis screen
Venom extractor
Queen
bee
equipment
Wax melting drum
Anti robbing hive
Pollen trap
Nucleus hive
Wasp trap
77
Autoclave
03
01
03
01
01
rearing 01
_____
_____
_____
_____
_____
Full Set
01
_____
01
_____
01
_____
01
_____
03
_____
Department of Plant Breeding &Genetics
Biotechnology
1
Digital Pressure gauge- 30psi
safety device- lower water level cut off, Pressure control switch
(Piezostat),automatic vacuum breaker Autoclave Vertical supplied
with S.S. Chambers, S. S. Basket &S.S.Lid with Wing nut closing
arrangement. Inner & Outer also made of S.S.(stainless steel), power
Capacity -300 liter, Temperature range-2 to 15 0c,Temperture
accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display
78
Refrigerator
1
35.
Incubator cum Shaker
1
Capacity -300 liter, Temperature range-5 to60 0c Temperature
accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display,
Temperature control – microprocessor, RMP - Digital Display
36.
Dry Bath
1
37.
Water Bath
1
Temperature range-2 to 15 0c,Temperture accuracy- +- 0.50c, Electric
power -220 V AC, Display- LCD display
Twelve holes top pan with led ,Electric power -220 V AC, Display- LCD
display, Temperature controller- thermostat, Temperature range-5 to
100 0c, auto control
38.
DNA Gel Electrophoresis with
Power supply
UV Tran illuminator
PCR Machine with online UPS
Magnetic Stirrer with hot
plate
Vortexer
Bench-top centrifuge with
Rotor for 1.5 ml tubes
Protein gel electrophoresis
unit
Weighing Balance
1
LP-80
39.
40.
41.
42.
43.
44.
45.
1 Genie make
1 IGBIHIGH
22331Hamberg
1
1 TANCO, 2 liter capacity
1
1
Model 130
1 Make Systronics
Bajaj
Single pan Electronic balance
Capacity – 200gms,
Readability – 0.1 mg,
Sensitivity – 0.1 mg,
Page 46
46.
47.
Liquid Nitrogen Container (20
Lit.)
Microwave oven
1
KERN, 20 liter capacity
Halo DB205, Size-30 liter capacity
1
48.
49.
50.
51.
52.
Hot Air Oven
Temperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric
power -220 V AC, Display- LCD display for set value and process
value, illumination—Fluorescent lamp
Size-300 litre capacity
Temperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric
power -220 V AC, Display- LCD display for set value and process
value, voltage indicator – digital volt meter, illumination—Fluorescent
lamp
1
1 Cl-203
1 LP-80
Vortexer
Gel Documentation System
Tissue culture Racks with Acs,
Photo-periodic
timer,
temperature controller
Ice Flaking Machine
Millipore 2 TLH0005
1
1 LICORINC LI6400XT
53.
Leaf Area Meter
Department of Plant Pathology
2
Handy, Maximum width,
54.
Balance
1
55.
56.
Respirometer
Compound Microscope
20
3
Warburg manometer, graduated tubes fitted on wood
Precise graduated slow motion reading to .002 mm, Eyepieces
WF 101x and 15 X two nose, Objective-10x, 45x and 100x (SL)
oil immersion
57.
Water Bath
1
58.
Plant
Growth
convention type
Twelve holes top pan with led ,Electric power -220 V AC, DisplayLCD display, Temperature controller- thermostat, Temperature range-5
to 100 0c, auto control
Temperature range-5 to 60 0c, Humidity range-5% above ambient
from 40 to 95 % RH, Temperature accuracy- +- 10c, Electric power 220 V AC, Display- LCD display for set value and poses value, voltage
indicator – digital volt meter, illumination—Fluorescent lamp
59.
Auxanometer
60.
Photometer
61.
Digital
meter
perimeter average and
accumulated area, Precision -1%, Resoluation-0.065 mm,
Memory-2000 data set, Dsplay-64x240 pixel graphic
display , Battery operated
Single pan Electronic balance
Capacity – 200gms, Readability – 0.1 mg, Sensitivity – 0.1 mg
Chlorophyll
Chamber-
1
Arc auxanometer, with stainless steel stand, clamp with arc
10 divided in to scale
Ganang,s photometer, capillary tube with, cork based with
10 water reservoir marked by scale
content
1
Measure parameter : CCl Value: measuring area: 1 cm
diameter, Resolution :0.1 CCl unit
Department of Plant Breeding and Genetics
62.
Weighing Balance
Single top pan Electronic balance
1 Capacity – 2000gms, Readability – 010 mg, Sensitivity – 1 gram
Page 47
63.
Range : 0-14.00 Ph
PH Meter
Resolution : 0.01Ph
Repeatability : + 0.01 Ph + 1 digit
Stability : 0.01 Ph per hour,
64.
Compound Microscope
5
65.
Water Bath
1
66.
Seed germinator Machine
1
67.
Grain Moisture Meter
68.
Digital pH meter( Systronic)
1 Auto temperature compensation
Precise graduated slow motion reading to .002 mm, Eyepieces
WF 101x and 15 X two nose, Objective-10x, 45x and 100x (SL)
oil immersion
Twelve holes top pan with led ,Electric power -220 V AC, DisplayLCD display, Temperature controller- thermostat, Temperature range-5
to 100 0c,
auto control
Size-300 litre capacity, no of shelves-14,
Electric power -220 V AC, Display- LED display, Temperature
controller- thermostat, Temperature range-5 to 60 0c, auto
control,Illumination - Fluorescent lamp
1 Batteries operated, Display- LED display
Soil Science and Agricultural chemistry
Range : 0-14.00 pH
1
Resolution : 0.01pH
Repeatability : + 0.01 pH + 1 digit Display- LED display, Electric power 220, Stability : 0.01 pH per hour
69.
Spectrophotometer( Systronic)
1
70.
Flame photometer with motor
( ELICO)
1
Graphical display, Light source-Xenon lamp, Wavelenthrange-190900 nm, Electric power -220 V AC
Sensitivity :
Element
Na
K
Ca
Mg
Li
Ppm
0.1
0.1
0.1
0.1
1-100
1-100
1-100
1-100
0.5
Range
Ppm
1-100
Linearity
In %
-------------- better than 2 %----------------------
Reproducibility
In %
------- 1 % CV for 100 consecutive sample-----
Lame System
71.
Atomic
Absorption
Spectrophotometer( With all
accessories like, cathode lamp,
gass cylinder, computer based)
1
LPG & Oil free dry air , Electric power -220 V AC
Double beam, Wavelenthrange-190-900 nm Sensitivity :
Element Fe , Mn , Cu, Zn , Ni , Pb, Co, and Cd
Ppm - 0.01-10 , 0.01-50 , 0.01-10, 0.01-10
and 0.001-5
0.005-5, 0.001-1,0.001-1
Electric power -220 V AC
72.
Grinder machine
1
Steel, ½ hoarse motor operated, Electric power -220 V AC, Chamber
Page 48
fitted with hopper three delivery stainless steel sieves-20,40 and 60 mes
73.
74.
Automatic soil testing system
Digital Balance (up to 200g)
75.
Single water distillation unit
76.
Core Sampler Tube Auger
77.
Digestion unit with glass
chamber and fume exhaust
system
1
1
1
1
1
IARA manufactured
Weight capacity-200g ,
Repeatablity-0.1mg ,Electric power -220 V AC
Mono quartz distillation unit, panel quartz boiler and
borosilicate condenser vertical model, output capacity 2.5 liter/
hr Electric power -220 V AC
Stainless steel , slide hammer, core cup and cap, 2 plastic end caps
and plastic liner
.BLOCK DIGESTION SYSTEM
Model : KES 40( MICRO DIGESTION SYSTEM)
No. of Samples : 40
Tube capacity
: 100 ml
Tube dimension : 300 x Ø 26 mm
Temp. range
: 50- 6000C
Electric power -220 V AC
Digit Display- LED display, Electric power -220, Stability : 0.01 Electrical
Conductivity per
78.
EC meter
1
79.
Double Water distillation set
1
Double quartz distillation unit, panel quartz boiler and
borosilicate condenser vertical model, output capacity 2.5 liter/
hr,Electric power -220 V AC
80.
Chemical balance
2
81.
Physical balance
2
82.
83.
Weight box
2
Stainless steel made, brass pan, fitted inside cabinet box, capacity 200 gram
Stainless steel made, brass pan, fitted inside cabinet box, capacity 200 gram
Set of box with milligram small box
Stainless steel made, 1 meter rod with handle, auger diameter 2.5
cm
Dutch Auger
2
84.
.AUTOMATIC DISTILLATION SYSTEM
Kelplus nitrogen distillation
unit
Distillation time
: 3-21 minute
Distillation capacity : 10-20 sample per hour
3.OPTIONAL MODULAR TITRATION FACILITY
1
85.
Hot plate (upto 400 °C)
86.
Laminar air flow
size7.5 x 7.5”, chemical resistant ceramic coated stainless steel
top, ( temperature- upto 0 -400 °C) Electric power -220 V AC
1
Steel table Top, Hepa Filter Pre- Filters, Cock for gas air with standard
accessories, Working area- 4 x 2 x 2 feet, Hepa filter size - 4 x 2 x 6 feet,
Hepa filter no. – 1,Pre –Filter no. - 2,Illumination 2 Fluorescent
lamp
1
Electric power -220 V AC, Front door
87.
Magnetic stirrer
1
2 liter capacity, Electric power -220 V AC, LED display
Page 49
88.
Mechanical shaker
1
Rotary Shakers with one platform of size 24 inch X 24 inch, 16 x 1000/ 25 X
500/ 36 X 250/ 49 X 150/ 64 X 100
Optional accessories:- Additional Platform
89.
90.
91.
92.
93.
94.
Mechanical stirrer
1
1
Mercury Thermometer
Hydrometer
5
12
1
Metallic Keen box
Metallic Sieve
Microscope
5
95.
Muffle furnace
96.
97.
Munsellcolour chart
Oven
98.
Refrigerator/freeze
99.
100.
Remi Centrifuge
Silica crucible
101.
102.
Soil testing kit
Soxhlet apparatus
103.
Tensiometer
1
1
1
1
10
105.
106.
107.
Yoder Aggregate analysis
apparatus
1
Voltage stabilizer
3
Core sampler with 50 core
1
Steam water bath
1
108.
Tensiometer
Resistance block
Seed drier
Size-300 litre capacity
Temperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric
power -220 V AC, Display- LCD display for set value and process value,
voltage indicator - digital volt meter, illumination—Fluorescent lamp
Size-330 liter capacityTempertature range-2 to 15 0c,Temperture
accuracy- +- 0.50c, Electric power -220 V AC, Display- LCD display
Capacity -5 gram grain sample can used, softening temperature
1700 0 c , Working temperature-1900-20000c
5
4
109.
110.
(0-200°C)
Molded , seamless construction with bouyoucos double scale for all
around visible
Lid s with capacity to used 200 gram soil sample
0.2 mm pore size, 2mm pore size
Precise graduated slow motion reading to .002 mm, Eyepieces WF
101x and 15 X two nose, Objective-10x, 45x and 100x (SL) oil
immersion
20x15x20 cm, Temp range- 1000-1300oC, Temp controllermicroprocessor based Electric power -220 V AC, Display- LED display
Electric power -220 V AC, Display- LCD display, RPM-15000 / minute
1
2
104.
Additional price for shaker with variable speed having digital speed meter
Stirrer Electric power operated -220 V AC, speed controller, with one
platform
Quartz distillation flask, borosilicate condenser vertical
model, output capacity , clamp and standwater bath operated
Ceramic cup , Three nos for shallow depth (30 cm), measurement ,
Three nos for 60 cm depth measurement
Size-330 liter capacity , Electric motor operated Electric power -220 V
AC, Display- LED display
Auto manual voltage stabilizer
steel
Twelve holes top pan with led ,Electric power -220 V AC, Display- LCD
display, Temperature controller- thermostat, Temperature range-5 to 100
0
c,
auto control
Agronomy
Ceramic cup , Three no.s for shallow depth (30 cm), measurement ,
Three nos for 60 cm depth measurement
5
5
1
Microcontroller based LED control digital display of temperature,
Forced air circulation, insulated tripped walled with gas kit door ,
easily replaceable of tubular heater
Page 50
111.
Seed grinder
1
Steel, ½ hoarse motor operated, Electric power -220 V AC, Chamber
112.
113.
114.
Maize Sheller
Glass thermometer
Automatic weather station
1
5
1
115.
Core sampler and tube Auger
2
116.
Pressure plate apparatus
1
117.
Refrigerator-220 Liter
1
Temperature range-2 to 15 0c,Temperture accuracy- +- 0.50c, Electric
power -220 V AC, Display- LCD display
118.
Physical Balance
1
119.
Leaf area meter
1
Stainless steel made, brass pan, fitted inside cabinet box, capacity 200 gram
Handy, Maximum width, perimeter average and accumulated
fitted with hopper three delivery stainless steel sieves-20,40 and 60 mes
10 cm length , iron made
Maximum, Minimum, Hg column
Comprises 6 sensors for measuring weather parameter- Wind speed,
wind direction, air temperature,, relative humidity, rain gauge and
solar radiation, 8 channel data logger is used to collect and data
connected by PC on site using remote connection option
Stainless steel made, 1 meter rod with handle, auger diameter 2.5
cm
Capable of measurement in .1 to 15 bar suction, Two extractor with
ceramic plates, Accessories like soil sample ring, pressure control
panel and compressor to be supplied
area, Precision -1%, Resoluation-0.065 mm, Memory-2000
data set, Dsplay-64x240 pixel graphic display , Battery
operated
120.
Computer
Dept. Of Agricultural Economics
2
with UPS and internet facility for agricultural marketing and
computer lab
121.
122.
123.
124.
125.
126.
Printer
SPSS software
Digital camera with video
Projector
facility set
Hard disc (1 TB)
Sound system
2
1
1
1
1
1
127.
Refrigerator
1
128.
Microscope (Stereo Zoom)
3
Department of Plant Pathology
LG GL-205KMG5 Double Door 300 Litres
Olampus, Universal infinity system with antifungal treatment
providing image flatness 10X (FN10) paired eye picce plan
achromatic objective 4X, 10X,40X and 100X seidentopf observation
head, observation tube 30 o incline interpupillary distance
adjustment range 40-75mm 6 v 20w halogen bulb
Page 51
129.
Oven
1
130.
Laminar air flow
1
Size-300 litre capacity
Temperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric
power -220 V AC, Display- LCD display for set value and process value,
voltage indicator - digital volt meter, illumination—Fluorescent lamp
Temperature range-5 to 300 0c, Temperature accuracy- +- 10c, Electric
power -220 V AC, Display- LCD display for set value and process value,
voltage indicator - digital volt meter, illumination—Fluorescent lampRemi
Steel table Top, Hepa Filter Pre- Filters, Cock for gas air with standard
accessories
Working area-
4 x 2 x 2 feet
Hepa filter size - 4 x 2 x 6 feet
Hepa filter no. – 1
131.
BOD incubator Cum shaker,
1
Pre –Filter no. - 2
Remi Microprocessor controlled Incubators with centronic printer
Illumination
2 Fluorescent
lamp
Interface ,Tempertature
range-5
to 60 0c,Temperture accuracy- +- 0.50c,
Electric
LCD display
Electric power
power -220
-220 VV AC,
AC, DisplayFront door
Capacity- 340 liters,62 W x 52 D x 102 H, 5 C to 60 C
Autoclave (Double walled
stainless
steel)-40
liter
capacity, Heating load-2.0
KWS
2
133.
Electronic Balance
1
Weight
,
a.
250 x capacity-200g
450 mm
Repeatablity-0.1mg
134.
Compound
Microscope
Instarision
Make
with
100xoll/mm
1
Olympus, Precise graduated slow motion reading to .002 mm,
Eyepieces WF 101x and 15 X two nose, Objective-10x, 45x and
100x (SL) oil immersion
135.
Hot Plate
1
size7.5 x 7.5”, chemical resistant ceramic coated stainless steel top,
( temperature- upto 0 -400 °C) Electric power -220 V AC
132.
Digital Pressure gauge- 30psi
satety device- lower water level cut off, Pressure control switch
(Piezostat),automatic vacuum breaker Autoclave Vertical supplied with
S.S. Chambers, S. S. Basket &S.S.Lid with Wing nut closing arrangement.
Inner & Outer also made of S.S.(stainless steel), power supplied- ,220 volt
AC
Page 52
TERMS AND CONDITIONS FOR FILLING TENDER DOCUMENT ON
LABORATORY EQUIPMENTS:
(a) Bid documents should be submitted in two different envelopes namely: (i) Technical (ii)
Financial
(b) In technical envelope detail specification and required documents should be enclosed.
(i) Registration certificate of the firm.
(ii) VAT registration certificate and VAT return copy of last quarter.
(iii) Photocopy of PAN card
(iv) Service Tax Registration Certificate
(v)Must have executed similar kind of order in bulk.
(vi)Must submit Audited balance sheet of the firm of the last three years.
(vii) Conditional tender will not be accepted.
(viii)University reserves the right to increase or decrease the quantity and may cancel the tender
at any stage without assuring any reason thereof.
(ix) Must submit income tax return copy of the last three years.
(x) The bidder must quote the shortest possible time during which they will be able to supply the
items at designated place decided by the University.
(xi) No freight charges will be paid extra other than quoted price.
(xii)Tender paper fee of Rs. 500/- will have to be deposited as DD in favor of Comptroller, BAU,
Sabour.
(xiii)For each equipment EMD @ 10% will be charged on minimum amount of Rs. 25000/especially for those whose EMD value has not been mentioned.
(xiv) EMD should be deposited in favor of Comptroller, BAU, Sabour
(xiv)Taxes applicable will be deducted
Page 53