(A) Remove backing paper from Simple Solution Corner Pad to expose
adhesive.
(B) The raised fin of the corner pad needs to be tucked under the weather
strip and (C1) the pad must contact the top surface of the sill cap .
For the Z Articulating Cap, the Simple Solution Corner Pad must contact
the top surface of the cap gasket (C2), instead of the cap.
B
A
Simple Solution
Corner Pad
C1
Weatherstrip
Corner Pad
Sitting on
Sill Cap
REV 10.12
C2
Weatherstrip
Corner Pad
Sitting on Gasket
Simple Solution
Corner Pad