Miller Oil Rig "Belly Buster" Harness

USA
Product Family
Miller Oil Rig "Belly Buster"
Harness
The Oil Rig "Belly Buster" harness features a
permanently-attached waist belt and an 8-inch abdomen
pad designed for “hands-free” positioning while working
on oil rig platforms (monkey boards).
Visit MillerFallProtection.com >
Product Numbers & Ordering Information
Product Numbers
Details
850DTOIL-RS/CFAG
Combination "bellybuster" Harness with PermanentlyAttached Belt
Rigid abdomen pad; built-in auto-lock carabiners; built-in sling seat for
raising/lowering - custom size - measurements must be provided
850DT-OIL-RS/LAG
Combination "bellybuster" Harness with PermanentlyAttached Belt
Rigid abdomen pad; built-in auto-lock carabiners; built-in sling seat for
raising/lowering - size large
850DT-OIL-RS/MAG
Combination "bellybuster" Harness with PermanentlyAttached Belt
Rigid abdomen pad; built-in auto-lock carabiners; built-in sling seat for
raising/lowering - size medium
850DT-OIL-RS/SAG
Combination "bellybuster" Harness with PermanentlyAttached Belt
Rigid abdomen pad; built-in auto-lock carabiners; built-in sling seat for
raising/lowering - size small
850DTOIL-RS/XLAG
Combination "bellybuster" Harness with PermanentlyAttached Belt
Rigid abdomen pad; built-in auto-lock carabiners; built-in sling seat for
raising/lowering - size x-large
850DTOIL-RS/XXLAG
Combination "bellybuster" Harness with PermanentlyAttached Belt
Rigid abdomen pad; built-in auto-lock carabiners; built-in sling seat for
raising/lowering - size xx-large
Page 1 of 3
© Honeywell International Inc.
Miller Oil Rig Belly Buster Harness
850-OIL/LYL
Bellybuster Harness with Permanently-Attached Belt
Rigid abdomen pad; built-in auto-lock carabiners - size large
850-OIL/MYL
Bellybuster Harness with Permanently-Attached Belt
Rigid abdomen pad; built-in auto-lock carabiners - size medium
850-OIL/SYL
Bellybuster Harness with Permanently-Attached Belt
Rigid abdomen pad; built-in auto-lock carabiners - size small
850-OIL/XLYL
Bellybuster Harness with Permanently-Attached Belt
Rigid abdomen pad; built-in auto-lock carabiners - size x-large
850-OIL/XXLYL
Bellybuster Harness with Permanently-Attached Belt
Rigid abdomen pad; built-in auto-lock carabiners - size xx-large
Overview
Key Features
Non-stretch nylon webbing harness
Standard back D-ring connects to shock-absorbing lanyard or self-retracting lifeline
Tongue buckle leg straps
Permanently-attached waist belt and an 8-inch abdomen pad
Triple-action autolock carabiners for safe rope positioning attachment
Recommended Industries/Use
Oil and Gas
Hazards
Confined Space
Fall from height
Regulations
Meets all applicable OSHA, ANSI and CSA standards
Warranty Information
We sincerely believe that our fall protection equipment is the best in the world. Our products endure rigorous test to ensure
that the fall protection equipment you trust is manufactured to the highest standards. Miller fall protection products are tested
to withstand normal wear and tear, but are not indestructible and can be damaged by misuse. Our Limited Lifetime Warranty
does not apply to normal wear and tear or abusive treatment of the product. In the unlikely event that you should discover
defects in either workmanship or materials, under our Limited Lifetime Warranty, we will repair or replace the product at our
expense. If a replacement is necessary and your product is no longer available, a comparable product will be substituted.
Should a product issue surface, contact us at 800/873-5242. Manufacturing specifications are subject to change without
notice.
Specifications
Maximum Working Capacity
All Miller harnesses are rated to 400 lbs. capacity
Specification Sheets
For full engineering specification sheets, go to downloads and documentation
Page 2 of 3
© Honeywell International Inc.
Miller Oil Rig Belly Buster Harness
Literature & Documents
Miller Harness and Body Belts Manual - US
http://www.honeywellsafety.com/Supplementary/Documents_and_Downloads/Fall_Protection
/Full_Body_Harness/16289/1033.aspx
Miller Harness and Body Belts Instruction Manual
Training & Proper Use
Proper product training and professional fall protection training is recommended. Refer to Product Use Instructions
enclosed with products.
Additional Information
800/873-5242 or 814/423-2118 email: [email protected]
Technical Support
Contact Miller Technical Service at 800/873-5242 or 814/423-2118 email: [email protected]
© Honeywell International Inc.
Page 3 of 3
© Honeywell International Inc.