Hydraulic punching tools
Electro-hydraulic punching tool „AS-6M“
SysCon set metric
in SysCon stacking box including 1 charger, 1 battery, 1 carry strap, without
inserts.
Content: 8 punches
1 220372 ABS plastic box „SysCon M“ (insert including)
1 270600 Electro-hydraulic punching tool „AS-6M“
With the different colours of the sensor LED, it shows whether the pressing has
been completed successfully or which errors have occurred:
Light is green: Pressing completed as standard, motor stopped.
Light is orange: Battery voltage not sufficient
Light is red: Pressing interrupted before completed
The device also has 2 white LED designed to illuminate the working area.
Extent of supply: 1 hydraulic punch: 1 connecting rod 3/8-24 UNF (article no.
217660), 1 connecting rod 3/4-16 UNF (article no. 217662), 1 adapter (article
no. 217664), 1 spacer bushing (article no. 217666), 1 SysCon stacking box.
1
1
1
1
1
1
1
1
217610
217612
217614
217616
217618
217620
217622
217636
M16
M20
M25
M32
M40
M50
M63
PG16
Advantages:
• Head can be rotated by 360°
• Flexible aluminium head
• Automatic end switch off
• Non-slip handle area
• Slim and compact construction
• LED to illuminate the area you are working in
• Li-ion technology
Punching capacity:
Shaped holes 138 x 138 mm (ST37 2.5 mm)
Round holes 150 mm (ST37 3 mm) / 63 mm (VA 2 mm)
Technical data:
• Pressing force: 60 kN
• Working pressure: 700 bar
• Battery charge time: 30 minutes
• Battery voltage: 18 V
• Battery capacity: 1,5 Ah
• Weight: 3.64 kg
• Weight of set: 4.7 kg
Art. no.
217600/M
kg
4,300
PU
1
Content: 9 punches
1 220372 ABS plastic box „SysCon M“ (insert including)
1 217600 Electro-hydraulic punching tool „AS-6M“
1
1
1
1
1
1
1
1
1
TL
530
kg
4,700
217630
217632
217634
217636
217638
217640
217642
217644
217646
PG9
PG11
PG13,5
PG16
PG21
PG29
PG36
PG42
PG48
PU
1
Art. no.
217600/PG
78
PU
1
SysCon set PG
Video 217600
Art. no.
217600
kg
4,300
PU Packing unit
PE Price unit
The legend for abbreviations for all table headers can be found sorted alphabetically on page 363.
Hydraulic punching tools
Hydraulic hand-punching tool „HS-8“
Punching dies, metric
Punches precise holes with almost no burring. Ideal for fast, frontal punching of
control panels.
Extent of supply: 1 hydraulic hand punch, 1 connecting rod 3/8-24 UNF
(article no. 217660), 1 connecting rod 3/4-16 UNF (article no. 217662),
1 adapter (article no. 217664), 1 spacer bushing (article no. 217666), 1
transport case.
• ST37, 3 mm
• VA 2 mm
• Punching performance: Steel sheet of up to a maximum of 3 mm
• Pressing force: 80 kN
• Length: 308 mm
• Weight: 2,4 kg
• Weight Set: 3,8 kg
Art. no.
217610
217612
217614
217616
217618
217620
217622
Ø
16,5
20,5
25,5
32,5
40,5
50,5
63,5
ISO 16
ISO 20
ISO 25
ISO 32
ISO 40
ISO 50
ISO 63
kg
0,070
0,090
0,150
0,220
0,900
0,640
0,950
PU
1
1
1
1
1
1
1
Ø
15,2
PG9
18,6 PG11
20,4 PG13,5
22,5 PG16
28,3 PG21
37 PG29
47 PG36
54 PG42
60 PG48
kg
0,060
0,084
0,091
0,120
0,170
0,330
0,536
0,731
0,896
PU
1
1
1
1
1
1
1
1
1
kg
1,862
1,500
2,000
PU
1
1
1
kg
0,040
0,203
PU
1
1
kg
0,100
PU
1
kg
0,100
PU
1
Punching dies, PG
• ST37, 3 mm
• VA 2 mm
Art. no.
217604
kg
3,800
PU
1
Art. no.
217630
217632
217634
217636
217638
217640
217642
217644
217646
Hydraulic hand-punch-cutter „HS-6“
Punching dies, square
Punches accurate slugs nearly free of burs. Usable for building and maintaining
control boxes, for car retrofitting and for sanitary application.
Extent of supply: 1 hydraulic punching tool, 1 rod 3/8-24 UNF (art. 217660), 1
rod 3/4-16 UNF (art. 217662), 1 adapter (art. 217664), 1 sleeve (art. 217666),
1 plastic case with insert.
• ST37, 2,5 mm
• UNF
• Punching capacity: Steel plates up to max. 3 mm
Art. no.
217650
217652
217654
• Pressing force: 60 kN
• Length: 230 mm
• Weight: 2,4 kg
• Weight Set: 3,8 kg
height
46
68
92
Connecting rod
Art. 217660 - 3/8-24 UNF
Art. 217662 - 3/4-16 UNF
Art. no.
217660
217662
1
2
Adapter
for connecting rod art. 217660
• UNF
Art. no.
217602
kg
3,800
PU
1
Art. no.
217664
Spacer bushing
Art. no.
217666
... convincing solutions
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, [email protected]
79
Punch and bending centre
Basic unit
Hole-making tools
Basic unit to accommodate bending, hole-making, cutting and cranking tools.
The processing of lamellar copper rails is possible! Hydraulic tool for
connection to a hydraulic pump with 700 bar (10,000 PSI).
The universal tool system is particularly suited for use in workshops and on
building sites. Copper and aluminium rails can be processed up to dimension
of 12 x 120 mm. The changing of the individual tools is carried out in seconds
thanks to the user-friendly construction. The compact construction and light
weight enable transportation in any car.
For punching round and slotted holes.
• Maximum material thickness: 12 mm
• Maximum diameter: 21 mm
• Maximum slotted hole: 17 x 20 mm
Bending:
Thanks to an integrated proximity switch a 100% repeat accuracy is achieved.
The maximum bending angle is 110°.
216776:
Hole tool for solid copper and aluminium rails
216777:
Hole-making tool for solid copper and aluminium rails as well as for laminated
copper rails and grounding bands
Hole-making:
The height-adjustable table with side stopper makes working easier. Marking
out and measuring is not necessary. Holes from 6.5 to 21.0 mm in diameter
can be punched. Slotted holes up to 14 x 20 mm.
With the hole tool II holes can be made in lamellar copper rails and grounding
bands.
Cutting:
Our cutting blade geometry enables clean and burr-free cutting.
Cranking:
The offsetting (stepped bending) by a material thickness is carried out in a
single process.
Art. no.
216776
216777
kg
4,300
4,300
PU
1
1
Hole inserts for round holes
For both hole-making tools, the following diameters can be supplied
Art. no.
216778
216778/L
216779
216779/L
216780
216780/L
216781
216781/L
216782
216782/L
216783
216783/L
216784
216784/L
216785
216785/L
Video 216770
Art. no.
216770
kg
51,000
PU
1
PU Packing unit
PE Price unit
The legend for abbreviations for all table headers can be found sorted alphabetically on page 363.
M6 > 216776
M6 > 216777
M8 > 216776
M8 > 216777
M8 > 216776
M8 > 216777
M10 > 216776
M10 > 216777
M10 > 216776
M10 > 216777
M12 > 216776
M12 > 216777
M16 > 216776
M16 > 216777
M20 > 216776
M20 > 216777
kg
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
PU
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Hole inserts for slotted holes
For both hole-making tools, the following diameters can be supplied
Art. no.
216786
216786/L
216787
216787/L
216788
216788/L
216789
216789/L
80
Ø
6,5
6,5
9,0
9,0
10,5
10,5
11,0
11,0
12,7
12,7
13,0
13,0
17,0
17,0
21,0
21,0
Ø
9x18
9x18
11x20
11x20
13x20
13x20
17x20
17x20
M8 > 216776
M8 > 216777
M10 > 216776
M10 > 216777
M12 > 216776
M12 > 216777
M16 > 216776
M16 > 216777
kg
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,500
PU
1
1
1
1
1
1
1
1
Bending tool
Cranking tool for stepped bending of power rails
For bending of solid copper or aluminium rails up to 12 x 120 mm. The bending
matrix suits all bending radii
for creating a material offset in rail thicknesses on a length of just 30 mm.
Possible offset 5, 6, 8, 10 and 12 mm
Art. no.
216771
216772
216773
216774
216775
Ø
5
8
10
20
universal (counterholder)
kg
4,000
4,100
4,200
4,500
3,200
PU
1
1
1
1
1
Art. no.
216792
Cutting tool
kg
10,000
PU
1
for separating solid copper and aluminium rails up to 12 x 120 mm
Tool cases
Stable metal sheet case for accommodation of hole-making tool with inserts
(1) or two tools (2)
Art. no.
216793
216794
quantity
1
2
kg
2,000
2,000
PU
1
1
Electro-hydraulic pump „Special“
electric foot switch, completely self-acting, also the release of the dies at the
end of the operation, 2 m high pressure tube and hydraulic connectors, for
industrial uses, where a high level of production is needed, 230 volt, with foot
switch control, pump for working outside
Art. no.
216790
mm
12 x 120
kg
5,500
PU
1
Cutting tool for lamellar rails
for separating lamellar rails made from copper, maximum dimensions: 12 x 120
mm
Art. no.
216359
Art. no.
216791
mm
12 x 120
kg
9,000
kg
51,000
PU
1
PU
1
... convincing solutions
Germany: HAUPA, Koenigstr. 165-169, 42853 Remscheid, Phone: +49 (0)2191 8418-0, Fax: +49 (0)2191 8418-840, [email protected]
81