Curriculum Vitae SENIOR DRILLING SUPERVISOR Almas Tower, Jumeirah Lakes Towers, 201, Level 49 P.O. Box 340505, Sheikh Zayed Road, Dubai, U.A.E. Tel: (971 4) 4249600, Fax: (971 4) 3751893, Email: [email protected] XXXXXXXXX Personal Details: Nationality: Residence: Date of birth: Birthplace Religion Sex Height Weight Work wear Size Footwear Size Marital Status Address E-mail Phone (landline / mobile) XXXXXXXXX XXXXXXXX January 19, 1966 Christian Male 83cm 104kg XL / 48 10.5 US Married XXXXXXXXXXXXX XXXXXXXXXXX XXXXXXXXXXXX SUMMARY OF EXPERIENCE High skilled Senior Drilling Supervisor with over 25 years drilling experience in the Oil and Gas Sector. During a career spanning 26 years in the Canadian oil and gas industry as well as North Africa, he spent the last 8 years as Senior Drilling Supervisor. Supervised/Drilled many horizontal and multilateral well bores; also worked as a Directional Driller (Schlumberger). Experience in Exploration Wells, High Temperature / High Pressure Wells, Directional / Horizontal, Multilateral Wells, Side Tracks, and Conventional Wells. Also CBM Drilling and coring. Drilling programs included Wellview, Open-Wells, Wellmen and Excel spread sheets to assist in cost effectiveness. Able to communicate well with rig personnel from many nationalities. Share past experience to improve drilling maintenance and performance as he has worked every position on the drilling rig. Ability to understand and carry out drilling programs and calculations: cement volumes; kill sheets, well control, hydraulics etc. Key Strengths and Skills Worked with WellVeiw, Open-Wells, Wellmen drilling programs with excellent Excel knowledge. Ability to work in the heat of the desert or the cold of Canadian north. Team Work – work with many nationalities together on one rig site. Supervised location solo or with night supervisor. Organizational ability to have drilling tools/personnel on site in timely manner. Worked as Roughneck, Derrickman, Driller and Toolpusher. Knowledge in Wellhead equipment. Strong knowledge in rig components, BOP’s and down hole drilling tools. CV of XXXXXXXXXXXXXX Company is registered & Licensed as a FREZONE Company under the Rules & Regulations of DMCC Page 1 of 5 Curriculum Vitae SENIOR DRILLING SUPERVISOR Almas Tower, Jumeirah Lakes Towers, 201, Level 49 P.O. Box 340505, Sheikh Zayed Road, Dubai, U.A.E. Tel: (971 4) 4249600, Fax: (971 4) 3751893, Email: [email protected] EDUCATION Degree High School Diploma Specialty Institute Creston, British Colombia Year 1984 INDUSTRY COURSES AND CERTIFICATES Year Certificate / Course Company 2009 Enform Enform Canada Nexen Enform Canada Canada Enform Leduc Safety Service Ltd. Leduc Safety Service Ltd. Canada Canada Canada Leduc Safety Service Ltd. Precision Drilling Canada Canada 1998 1998 Second Line Supervisors Well Control (test well) Safety Management & Regulatory Awareness for Wellsite Supervision Nexen IRP16 Basic Safety Awareness Program Detection and Control of Flammable Substances H2S Alive Standard First Aid – Level A CPR Transportation of Dangerous Goods Act and Regulations W.H.M.I.S. Precision Drilling Observation & Communication Seminar Directional Drilling - DD1 Certificate Fall Protection for Rig Workers Country of issue Canada Canada Canada 1998 1992 Rig Rescue Accident Control for Drilling & Servicing Schlumberger Petroleum Industry Training Services. Arresting You Ltd. Ensign Drilling 2008 2007 2007 2008 2010 2010 2008 2002 Canada Canada ITS Skills: Microsoft Office (Word, Excel, Power Point), Wellveiw; Wellman; DIMS; Open Wells LANGUAGES: English AREAS / COUNTRIES WORKED Canada, Libya. PROFESSIONAL EXPERIENCE Dates Country Company Designation March 2009 2010 Libya XXXXXXXX Senior Drilling Supervisor Present Responsibility Supervising the drilling activities on a 21,000’ land rig in the Sahara desert. Wells include - HPHT Exploration drilling, Horizontal and in field drilling. Well depth range from 10,500’ to 16,500’. Drilling fluids: Bentonite, Polymers and OBM. CV of XXXXXXXXX Company is registered & Licensed as a FREZONE Company under the Rules & Regulations of DMCC Page 2 of 5 Curriculum Vitae SENIOR DRILLING SUPERVISOR Dates Country Company Designation Aug 2008 – Feb 2009 Canada Codeco Consulting Senior Drilling Supervisor June 2007 - July 2008 Canada Nexen Inc. Senior Drilling Supervisor Dec 2006 - May 2007 Canada Talisman Energy Inc. Senior Drilling Supervisor Almas Tower, Jumeirah Lakes Towers, 201, Level 49 P.O. Box 340505, Sheikh Zayed Road, Dubai, U.A.E. Tel: (971 4) 4249600, Fax: (971 4) 3751893, Email: [email protected] Responsibility Codeco is a consulting firm, I was sent out to 3 separate projects. The first was drilling shallow wells near Fort St. John, BC using oilbased fluid. The second was drilling 2 wells for Amarone Oil and Gas. The second of these wells was drilled in the rock creek formation at a total depth of 3700 metres. We ran a packer plus system in the horizontal section. The third project consisted of shallow gas wells drilled for Spearpoint Energy. Responsible for daily drilling activities, ensured compliances were met for the government and company regulations. HSE (health, safety, environmental) issues were met with a daily tail gate meeting with each drill crew prior to start of shift. Duties included transporting drilling rig to locations and setting up on 4 well pad. Drilled horizontal CBM (coal bed methane) with 3 multi-lateral legs off one mother bore. Each lateral leg (3/mother bore) used Weatherford hydraulic quick-cut milling system with quick-pack packer. Lateral hole was drilled with Produced water through Mannville coals reaching 2800 m to 3800 m in total measured length. Slotted liner was conveyed into lateral section followed by two open hole packers and C-Hanger. Nexen well site reporting system used Open-Wells with Excel spread sheets to assist in cost effectiveness, casing and drilling tools inventory. Work as a relief Senior Drilling Supervisor for the winter drilling season. Ability to take over in midstream and continue to follow drilling program set forth by Talisman. Duties included transporting drilling rig from location to location, correlating trucks, cranes and all personnel. Performance motors with PDC bits for max penetration rates to cut cost per meter. Drilling fluids ranged from area drilled. OBM, Potassium Silicate and PHPA were used. Type of wells ranged from S-Curved and Vertical 3000 m to 3800 m in total depth. Primary target zone – Cadomin. Talisman well site reporting system used Wellview daily reports with Excel spread sheets to assist in cost effectiveness. CV of XXXXXXXXX Company is registered & Licensed as a FREZONE Company under the Rules & Regulations of DMCC Page 3 of 5 Curriculum Vitae SENIOR DRILLING SUPERVISOR Dates Country Company Designation July 2002 - Nov 2006 Canada Trident Exploration Corp. Senior Drilling Supervisor Sept. 1999 June 2002 Canada Precision Drilling. Tool Pusher 1998 1999 Canada Precision Drilling Driller March December 1998 Canada Schlumberger Directional Driller Almas Tower, Jumeirah Lakes Towers, 201, Level 49 P.O. Box 340505, Sheikh Zayed Road, Dubai, U.A.E. Tel: (971 4) 4249600, Fax: (971 4) 3751893, Email: [email protected] Responsibility Supervisor vertical and horizontal well bores in the Mannville Coal field in central Alberta (Canada). Coordinated full bore continuous wire line core samples. Well bore were cemented with light weight surrey and also nitrogen foam cement to reduce hydrostatic pressure on the coal. Horizontal wells consisted of 4 laterals off the horizontal mother bore. Laterals were drilled out using Weatherford hydraulic quick-cut milling system with quick-pack packer. Lateral hole was drilled with Produced water through Mannville coals reaching 2400 m to 3600 m in total measured length. Slotted liner was conveyed into lateral section and released at the bottom of each window with Imports Tools hydraulic running tool. Each pad location consists of 5 wells. 4 wells with 4 legs off each well bore for a total of 16 horizontal legs per location. The 5th well produced water disposal well. Trident well site reporting system used Wellview daily reports with Excel spread sheets to assist in cost effectiveness. Rig Manager on Oilwell 700, National 80-B, National 610. Supervised all maintenance and repairs on all types of rig componets & BOP’s. Worked in remote location via helicopter. Maintain drilling records of daily activities and maintenance of drilling components. Direct rig crew in setting up rig and all aspects of drilling procedures. Train crew members and follow HSE policy and procedures. Drilled on National, Oil Well & Emsco draw-works & mud pumps. BOP’s ranged from 3000psi to 15,000psi. Worked in all weather conditions, temperatures in the range from 38 celsius down to -45 celsius. Type of wells drilled involved in range from high angle horizontal multi-lateral, high pressure gas wells, under balance legs, S-curved, H2S, coil tubing and snubbing units. Drilling tools included single shot & MWD survey tools. Wellbore types include:build & hold, ”S” cruves & Horinzontals. Training on down hole mud motor & DD1 training in Houston, TX. CV of XXXXXXXXX Company is registered & Licensed as a FREZONE Company under the Rules & Regulations of DMCC Page 4 of 5 Curriculum Vitae SENIOR DRILLING SUPERVISOR Dates Country Company Designation 1994 1997 Canada Precision Drilling Brelco Drilling Ensign Drilling Driller 1986 1994 Canada Regent Drilling / Ensign Drilling Roughneck, Motor-hand, Derrick-hand 1984 to 1986 Canada Pipeline companies Labour/welder’s helper Almas Tower, Jumeirah Lakes Towers, 201, Level 49 P.O. Box 340505, Sheikh Zayed Road, Dubai, U.A.E. Tel: (971 4) 4249600, Fax: (971 4) 3751893, Email: [email protected] Responsibility All duties and procedures as to the above description apply. The depth and size of rig drilled on varied: Precision Drilling: Oilwell 610 (3800 m), Oilwell 80-B (4500 m), Coil Tubing rig (1000 m) Brelco Drilling: Oilwell 80-B (4500 m) Ensign Drilling: Brewster N-7 (3000 m) Started as a floor-hand on 3000 m triple and worked up to a Derrick-hand. Duties included: working the rig floor, repairing mud pumps, rig moves, nipple up BOP’s, maintenance of all rig components and cleaning of rig. Running the forklift, unloading mud materials and casing. Worked as a motor-hand on a 6400 m diesel electric triple and worked my way up to derrick hand. Worked various jobs while working on the pipeline CV of XXXXXXXXX Company is registered & Licensed as a FREZONE Company under the Rules & Regulations of DMCC Page 5 of 5
© Copyright 2026 Paperzz