INSTRUCTION
to
ls
o
Showerbath Leg Set
ASALSB
re
qu
ire
d
IMPORTANT NOTICE!
The showering bath comes with
pre-marked, and predrilled holes
for the fixing of the leg set.
A
Depicts the installation of the leg
utilizing the pre-marked, and predrilled holes.
Please first check that if using A ,
then a minimum of 20mm clearance
is allowed from the end of the leg
set to the side of the bath.
If this is not the case then use the
following installation method.
B
Attach the leg set on an angle as
shown in the diagram. Ensure that
the fixing points of the leg set fit
within the baseboard of the bath.
A
B
1
A