Wisconsin
Heat Treaters
Energy Efficiency Incentive*
100 + 0%
$
GET
GET
Per
Element
Financing
Energy Rebate
SpyroCor™
Maximize Your Radiant Tube Furnace
Over a Decade
of Proven Savings
Traditional Radiant
Tube Furnace
275,000 btu/hr (Input)
65,000 btu/hr
Over 50,000
elements sold
Over 15
countries
How SpyroCor™ works
SpyroCor is installed in the exhaust leg of your radiant tube
furnace. Their patent pending, multi-fin twist design doubles the
amount of surface area available. Radiation and convection heat
transfer is now present in the exhaust leg, so the two legs are
balanced from a heat transfer standpoint.
Exhaust
45,000 btu/hr
165,000 btu/hr (Lost)
Features
• Installs in minutes while furnace is hot saving valuable production time
• Durable silicon carbide lasts through multiple tube changes
260,000 btu/hr (Input)
65,000 btu/hr
• Improved temperature uniformity between burner and exhaust legs
• Alloy locator rod holds SpyroCor™ in place and allows easy removal
• Available for Straight, U, W and Tri-tubes
• Lightweight system will not damage tube
Benefits
• Increase of Heat Productivity
• Increase Exhaust Leg Heat Transfer Rate
Exhaust
• Increase Throughput of Product
• Faster Recovery Time Between Cycles
• Lower Operating Cost
65,000 btu/hr
• Reduced CO2 and NOx Emissions
International Corporation
SPIN-WORKS.COM
IMPROVED HEAT
RECOVERY
°F
1800
OPTIMUM OPERATING
TEMPERATURE °C
982.2
1600
871.1
1400
760.0
1200
648.8
1000
537.7
800
426.6
600
315.5
400
200
FASTER COOLING TIME
0
204.4
93.3
0
CYCLE TIME
REDUCED*
*Cycle Time Reduction may vary depending on the type
of furnace and operation. Contact Spin-Works for
evaluation of your system.
Cycle Time
130,000 btu/hr (Lost)
For more inormation visit
Temperature in Degrees
Radiant Tube
Furnace with
SpyroCor™
Dynamic Ceramic
*Incentive is only good through March 2014 for qualified businesses within Wisconsin. Your project may require pre-approval, contact your Spin-Works Representative in your area
for more information. Spin-Works International Corp. is a manufacturing company that specializes in making your radiant tube furnace more efficient. To see if your business
qualifies for this program please contact your Spin-Works representative.
SPYROCOR
™
by
Spin-Works™
Available for Straight, U, W
and Tri-tubes, SpyroCor™ can
be installed “HOT,” saving
you valuable production time
during installation.
The SpyroCor™ Advantages
SpyroCor™ allows for temperature uniformity in the hot zone of the furnace. Since
both legs of the tube are balanced, the exhaust leg no longer acts as a “cold
spot,” improving the overall quality and speed of the product being processed.
Up To
6
Exhaust Leg of Traditional Radiant Furnace
1
2
3
Straight Tube
100 + $100 +$100 + $100 +$100 + $100 +$100=$700
Up To
12%
Energy
rebate for Wisconsin Heat Treatiers
for the above illustration would be $700
Radiant Tube Exhaust
SpyroCor Elements
Silicon-Carbide Spacer
Alloy Locator Rod
Existing Customer Recuperator
Refractory Wall
savings
10 12
18
SAVE UP TO
CALL TODAY
%
AVERAGE
Emission
Reduction
%
More
Efficient
Month Average
PAYBACK
Up To
10%
U-Tube
Energy
savings
The above percentages are averages. Your results may vary within your
system. Call Spin-Works for a complete evaluation on your system.
SpyroCor™ can be custom made to fit your radiant tubes. Contact us about your project
and we will work with your team to gather the specifications needed to help you start
saving on your emissions and your heating expenses today. Or for more information on
other energy saving products offered by Spin-Works visit our website at
SPIN-WORKS.COM
About Spin-Works
savings
5
4
$
1
2
3
4
5
6
17%
Energy
Up To
Tri-Tube
9%
Energy
savings
Spin-Works is located in North Western Pennsylvania and is a worldwide leader in the
design, engineering and manufacturing of complex shaped ceramic products used in
high temperature, energy efficiency and heat exchange applications. Through the use of
proprietary forming methods, including rapid print manufacturing (patent pending), near
net shape ceramic components are manufactured without the need to post-process
design features such as fins, holes, slots, dimples and ridges.
We don’t make the furnace...
...we make a furnace perform
International Corporation
Dynamic Ceramic
W-Tube
10093 West Main Rd. North East, PA 16428
+1 814.725.4173 • Fax +1 814.725.4172 • Spin-Works.com
SpyroCor™ is a registered trademark of Spin-Works International Corp. ©2013 Spin-Works G100-06/13