Oil Production Application
420-17-058
Gas Plant Level Solutions
for Automation and Control
Total Level, Interface Level, & Temperature
Measurement for Gas Plant Wastes
DM231
Modbus or Analog Output.
• Condensation and changing compositions require ExplosionProof for Class I, Div. 1 installations.
constant maintenance and re-calibration.
• Stratification of oils, glycols, and water make “total
level” measurements difficult for many traditional
technologies.
• Maintenance personnel continue to make level
readings and adjustments to existing level systems.
THE PROBLEM
Vapor
THE SOLUTION
• The DM231 Magnetostrictive Level System for
Total Level, Interface Level, & Temperature
• Unaffected by vapors, coatings, density, and
variations. The DM231 requires no periodic
maintenance and no calibration.
• “Plug-N-Play” XP system for Class I, Div. 1
installations.
• High Accuracy, 0.01% of span.
• Measurement Range - Up to 24 ft.
Light Ends
Hydro Carbon
Water
Sludge
Other Solutions:
• Accumulator Vessels • New Glycol Tanks • Triethylene Glycol • Oil/Water Wastes • Slop Oil Vessels • Floor Drain Levels • Reclaim Oil • New Oil • Brine Level
• Drip Gas
• Dehy Water Wastes
• Dehy Gas Wastes
• Point Level Control • Overfill Protection • Waste Management
• Regulatory Compliance
Typical Uses:
Continuous Level Control Inventory Management U.S.A. Sales: 800-553-9092 • 24-Hour Service: 800-527-6297 • International Support: 215-674-1234 • Fax: 215-674-2731
DREXELBROOK
205 Keith Valley Road
Horsham PA 19044 U.S.A.
E-mail - [email protected]
Web - www.drexelbrook.com
AMETEK Nihon Drexelbrook
2 Chome • 12-7 Minami Gyotoku
Ichikawa City • Chiba 27201 Japan
Phone: 81-473-56-6513
Fax: 81-473-56-6535
E-mail: [email protected]
AMETEK Singapore Pte. Ltd.
10 Ang Mo Kio Street 65
#05-12 Techpoint • 569059 Singapore
Phone: 65-6484-2388
Fax: 65-6481-6588
E-mail: [email protected]
AMETEK Precision Instruments Europe
Rudolf-Diesel-Strasse 16
D-40670 Meerbusch Germany
Phone: 49-2159-9136-0
Fax: 49-2159-9136-39
Web: www.ametek.de
©2006, by AMETEK, Inc. All rights reserved. • Printed in the U.S.A. • EDO# 4-06-246 • Issue #1