Accudrill Inc.
C.C.A.D.
AUTO Drilling System.
PH: (780) 955-9337 / Fax (780) 955-9363
PATENT PENDING
© 2005
Accudrill Inc.
C.C.A.D.
Auto Drilling System
Rig requirements:
•
Clear access to the Drawworks Roto Seal, 5/8”NF or 1” NF thread area.
•
A Drawworks brake handle.
•
3/4” to 1-1/2” Deadline cable size.
•
System needs only 110vac power to operate
(NO AIR OR OIL NEEDED).
•
Adaptable to almost any rig.
•
A typical install is about two hrs or less.
Accudrill Inc: PH (780) 955-9337 Fax: (780) 955-9363
PATENT PENDING
© 2005
Accudrill Inc.
C.C.A.D.
Auto Drilling System
System Info:
• PLC based system.
• Intrinsically safe.
• CSA approved.
• Explosion proof for Class 1 Div 2 environments.
• Speed 0-500 m/hr, range of adjustment.
• Weight on bit 0-50,000 daN, range of adjustment .
• Touch screen Adjustments.
• The safest system on the market today.
• 24 years experience Repairing, Building and Designing , Auto Drilling Systems.
• System Designed and built in Alberta, Canada.
Accudrill Inc: PH (780) 955-9337 Fax: (780) 955-9363
Accudrill Inc.
Operator Interface – Touch Screen
SYSTEM
OVERVIEW
Weight on Bit Feedback
Control Panel
Brake Handle Actuator
R.O.P. Feedback
PATENT PENDING
© 2005
Accudrill Inc.
OPERATION SCREEN
When Drilling, this is the Operation screen used for all adjustments and
where real time W.O.B. and R.O.P. values can be monitored.
This Operation Screen
Allows the Driller to:
•View and update the Actual and
Total Hook Load.
•Select the Weight on Bit set point.
•Select the Rate of Penetration set
point.
•Monitor Kelly position, complete
with auto stop.
PATENT PENDING
© 2005