The ComProof line is engineered for proof testing and rewinding of optical fibers. Fiber strength
is tested by applying tensile stress to the fiber between two capstans. Optional ribbon test
configuration is also available. Modern, brushless AC-technology is used in all drives for
minimal maintenance needs, and compact design reduces floor occupancy and installation time
by built-in electronics and control system.
Machine is based on well-proven ComTu dual take-up technology. One spooling unit is used for
paying off the material, while another unit is used for winding the tested material. Same reels
can be used in dual take-up of fiber drawing towers. Convenient working spot light is located on
the top of the machine as standard
Modern fiber testing standards are used while designing the ComProof. ComProof exceeds
international proof testing standards, e.g. TIA/EIA FOTP-31-C Proof testing optical fiber by
tension, IEC 793-1-B1 Optical fiber proof test and ITU G.650 Test methods for proof testing.
Tested length is easily configurable to suit different needs and test standards.
Speed, max. 2000 m/min
Test tension 2…20 N
Test length 2…12 m
Reel dia. max. 550 mm
Reel weight max. 50 kg
Compomec provides innovative and reliable solutions to the optical fiber and cable industries
including from single wire equipment to the high voltage cable machines. During the past 10
years Compomec has developed and delivered thousands of equipment and solutions
worldwide thanks to the co-operation with customers.
Compomec - “winding the future”