LD180 PROGRAMMING DIAGRAM
I N S T A L L A T I O N
• RGB AQUAFLEX • RGB STARFLEX • RGB EDGE • RGB AQUA EDGE • RGB LINEARFLEX • RGB SUPER NEON X • RGB ZILVA • RGBW AQUAFLEX
• RGBW STARFLEX • AQUAFLEX DYNAMIC WHITE • STARFLEX DYNAMIC WHITE
RGB PRODUCTS
Setting mode of operation:
Setting LED group:
DMX address:
Network resolution:
Visual test run:
•
•
•
•
•
Press M
Press M twice
•
•
Press M for 3 seconds
Press M +
•
•
will display
SET MODE
Use
,
will display
LED
•
to select DMX
,
Use
will display
DMX ADDR
•
to select RGB
,
Use
Use
,
+
Press M +
•
RESET
PRES MENU
will diplay
•
to select 8 BT
+
•
will display
TEST
•
to select 1 or 5
•
Press M +
will display
NETW RES
•
Factory defaults:
•
LD180 will begin a visual
Press M to restore
•
•
•
•
Press M to set
Press M 3x to set
Press M 3x to set
Press M 2x to set
RGBW PRODUCTS
Setting mode of operation:
Setting LED group:
DMX address:
Network resolution:
Visual test run:
•
•
•
•
•
Press M
Press M twice
•
•
Press M for 3 seconds
Press M +
•
•
will display
SET MODE
Use
,
will display
LED
•
to select DMX
Use
,
will display
DMX ADDR
•
to select RGBW Use
,
Use
,
+
Press M +
•
RESET
PRES MENU
will diplay
•
to select 8 BT
+
•
will display
TEST
•
to select 1 or 5
•
Press M +
will display
NETW RES
•
Factory defaults:
•
LD180 will begin a visual
Press M to restore
•
•
•
•
Press M to set
Press M 3x to set
Press M 3x to set
Press M 2x to set
DYNAMIC WHITE PRODUCTS
Setting mode of operation:
Setting LED group:
DMX address:
Network resolution:
Visual test run:
•
•
•
•
•
Press M
Press M twice
•
•
Press M for 3 seconds
Press M +
•
•
will display
SET MODE
Use
,
to select DMX Use
will display
LED
•
,
to select CCWW
will display
DMX ADDR
•
Use
,
to select 10
•
Use
,
•
Press M +
+
Press M +
•
will display
NETW RES
•
Factory defaults:
to select 8 BT
•
•
•
•
Press M to set
Press M 3x to set
Press M 3x to set
Press M 2x to set
will display
TEST
+
•
•
LD180 will begin a visual
RESET
PRES MENU
will diplay
•
Press M to restore
All MODA LIGHT products should be installed by a Licensed Electrician to local & national code. Do not modify, adapt or cut any MODA LIGHT components, plugs or accessories. Any modifications will void the warranty
and may create a potential safety hazard. Do not put on the same circuit as inductive loads. Incorrect wiring will result in irreparable permanent damage to the LEDs and fixture. MODA LIGHT tests all products before
shipping, and will not replace items that have been destroyed by incorrect wiring or handling. Ensure electrical circuit is switched off before wiring. See MODA LIGHT terms and conditions for product limited warranty.
© Cop yrig ht 2 01 5 • 955 W hit e Dr iv e, Las Vega s , N V 8 9 11 9 • T: 7 0 2 4 0 7 7 7 7 5 • F : 7 0 2 4 0 7 7 7 7 3 • w w w.m o d a l i g h t.co m