LINEAR TEAR DROP CRTD PRODUCT HIGHLIGHTS • Conforms to requirements of Fed. Std. 209E Class M2.5 and above (formerly class 10) • Available in 2, 4, 6, & 8-foot lengths • Tear drop design minimizes air flow turbulence • Mounts conveniently on 1”, 1-1/2”, or 2” T-Bar with Z clip • Milk-white acrylic lens with internal linear prisms conceals lamp image • Lens easily removed for ballast and lamp maintenance CONSTRUCTION- Fixture housing, lampholder brackets, and channel cover constructed of code-gauge steel. Fulllength, acrylic diffuser with internal linear prisms snaps into housing without use of tools and is secured by aluminum end plates. ELECTRICAL - All devices UL/CUL listed. Suitable for damp locations. Damp location emergency pack must be specified separately. Ballasts are solid-state electronic. Ballasts and lampholders replaceable without removing from ceiling. Discrete voltage must be specified for emergency pack options when wired with flex. DIMENSIONS FINISH - All metal parts painted after fabrication following treatment with phosphate rust inhibitor. Finish coating of housing reflecting surfaces is with white, high reflectance (minimum 92%) polyester powder. . 2" (51mm) PHOTOMETRICS - Please visit our web site at www.lsi-industries.com for detailed photometric data. 5-27/32" (151mm) ARRA Funding Compliant wet location ORDERING INFORMATION TYPICAL ORDER EXAMPLE: Prefix CRTD CRTD 32 SSO10 17- 17W 2' T8 25 - 25W 3' T8 30 - 30W 3' T8 32 - 32W 4' T8 Note: For tandem configurations suffix above number with “-2” EM UE Ballasts Lamp Type Lamps 1 1 SSB - Biax Instant Start SSBR - Biax Program Rapid Start SSOD - T8 Dimming (specify type) SSOL - T8 Low Watt SSOHL- T8 High Ballast Factor SSOHLR- T8 Program Start High Ballast Factor SSOR - T8 Programmed Start SSO10 - T8 <10% THD Instant Start Options Voltage F - Fusing EM - Emergency Pack EMDL - Emergency Pack - Damp Location GMF - Slow Blow Fusing PM - Prewired Plug-in Assembly (specify circuitry. See Options/Accessories Section) CB - Connecting Bands CEE - CEE Approved Components installed 120 - 120V 277 - 277V 347 - 347V UE Universal Electronic (120-277V) ACCESSORY ORDERING INFORMATION Description Zip clamp for T-bar mounting (2) per kit Project Name Catalog # Order Number M38024 Fixture Type 10/22/15 © 2015 LSI INDUSTRIES INC. 485
© Copyright 2024 Paperzz