low pressure co2 dispensing turbine/surgical tool regulators

LOW PRESSURE CO2 DISPENSING
A preset two stage regulator which provides excellent pressure control at
130kPa. It comes complete with cylinder contents and outlet pressure
gauges, yoke inlet and Luerlock outlet fitting. The regulator is factory to
specified out pressure.
Part No
G0055
Description
Regulator CO2 Dispensing 130kPa
TURBINE/SURGICAL TOOL REGULATORS
These two regulators are specifically designed for operating
turbine/surgical tool equipment. They both have an adjustable outlet
pressure up to 1400kPa. They both have inlet and outlet pressure
gauges, a medical air pin indexed yoke inlet and a pressure relief
valve. They are available with either a Schrader quick connect or a
sleeved SIS outlet fitting.
Part No
G0063
G0218
Description
Regulator Turbine Tool Schrader Outlet
Regulator Turbine Tool Sleeved Outlet
SERIES-O REGULATORS
Gascon Systems offers a range of preset medical regulators. These are
based on the well-known SERIES-O™ regulator
These regulators have gas specific inlet and outlet connections and a
flow performance to suit most applications.
Part No
G0072
G0071
G0070
G0092
G0144
G0018
G0129
G0265
G0266
Working Gas
Carbon Dioxide
Carbogen
Entonox
Breathing Air
Nitrous Oxide
Nitrous Oxide
Helium (He/O2 Mixes)
Oxygen
Oxygen
Inlet
Indexed Yoke
Indexed Yoke
Indexed Yoke
Indexed Yoke
Indexed Yoke
Type 30
Pin Indexed Yoke
Type 10
Pin Indexed Yoke
Pin
Pin
Pin
Pin
Pin
Outlet
SIS Sleeve
SIS Sleeve
SIS Sleeve
SIS Sleeve
SIS Sleeve
SIS Sleeve
User Defined
SIS Sleeve
SIS Sleeve
Pressure
400kPa
400kPa
400kPa
400kPa
400kPa
400kPa
400kPa
400kPa
400kPa
INSUFLATOR REGULATOR
This regulator is designed for use with key-hole surgery procedures. A
two stage medical carbon dioxide regulator with an adjustable outlet
pressure to 80kPa. A pressure relief valve on the second stage prevents
the regulator from supplying greater than 100kPa should the regulator
malfunction. It includes a cylinder contents and outlet pressure gauge,
yoke inlet and CO2 SIS outlet fitting.
Part No
G0100
Description
Regulator CO2 Insuflator 80kPa