BEKA LEDshine
Technical Product
Specifications
Table of contents
1. General Specifications .................................................................. 3
2. Photometry ................................................................................. 3
3. Mechanics ................................................................................... 4
4. Electrical Characteristics ............................................................... 5
5. Environment................................................................................ 5
6. Version specific characteristics ....................................................... 5
7. Certification and Compliance to Standards ...................................... 6
8. Storage Conditions ....................................................................... 7
Page 2 of 8
1. General Specifications
Product Description
Main applications
Recommended mounting
height
Modern LED post top luminaire designed for
general area lighting where good optical
control is required in conjunction with
modern architecture.
Class B road Lighting, Parking Areas,
General Area Lighting, Parks and Gardens.
3.5m – 5m
2. Photometry
Light source
LED
Number of LED
36
LED
OSRAM
Light color
Neutral White (4500K)
Color rendering (Ra)
>70
Lumen package
36 LED
5040
Optics
LEDshine 43W-Louvre
LEDshine 43W-Opal
Photometry:
See Photometric Tables
Protector
High Impact Acrylic (IK08)
Page 3 of 8
3. Mechanics
Electronic Control Gear
Constant Current Driver Osram OT45
Materials and Finishing
Painted Aluminum Housing – Standard Grey
(RAL 7045)
Coating
RAL colours on request
Installation
Pole Mount or Wall Mount
Fixing
3x
Dimensions (DxH)
245mm x 565mm
Weight (with gear)
8.7kg
Windage Area CxS
0.19m2
Access
Yes
Page 4 of 8
4. Electrical Characteristics
Line Voltage
230VAC
Mains Voltage Tolerance (AC)
207-253V
Line Frequency
50Hz
Electrical Safety Class (IEC)
I
Surge Protection
N/A
Lighting Regulation
N/A
5. Environment
Storage Temperature
-40oC< T < 85oC
Enclosure Tightness
IP 65 Gear and Optical
Enclosure Mechanical Withstand
Impact
IK08 (Acrylic)
6. Version specific characteristics
Luminaire configuration:
LED Lumen Depreciation
@ Tq = 25°C @ 60.000hrs @350mA
≤20%
Typical Input Power @ Ta = 25°C
Max. 43W
Power Factor (not dimmed)
>0.9
THD
<20%
Operating Temperature Range
(Safety - no damage) (*)
Operating Temperature for
Performance and Lifetime
(L80@60000h) (*)
-20 oC < Ta <35 oC
Tq max =
35 oC
Page 5 of 8
LED Junction Temperature @ Tq
max.
<85oC
7. Certification and Compliance to Standards
Electrical Safety
SANS 60598-2-3
EMC-EMI
Immunity : SANS61547
Electrostatic Discharges :
SANS61000-4-2
Radiated Fields : SANS61000-4-3
Fast Transient Burst : SANS61000-4-4
Surges : SANS61000-4-5
RF Conducted Perturbations : SANS61000-4-6
Main Magnetic Fields : SANS61000-4-8
Voltage Dips : SANS61000-4-11
Emission :
Radiated Emissions : SANS55015
Conducted Emissions : SANS55015
Harmonics : SANS61000-3-2
Flicker : SANS61000-3-3
Impact Test
SANS 62262
Enclosure Protection Level
SANS 60529
Page 6 of 8
8. Storage Conditions
Until installation, luminaires should be placed in a covered dry storage area,
preferably in a roofed area with a tarp keeping water off the cardboard
boxes, and protected against marine salt environment.
Prior to installation, luminaires should not be stored outside in cardboard
boxes alone.
Maximum storage temperature: + 85°C with relative humidity up to 95%
no condensing.
Minimum storage temperature: - 40°C
Exposure to extreme conditions cannot exceed 6 months.
After installation, the luminaire may not stay unpowered over 12 months
while exposed to extreme conditions described here above.
These storage conditions refer to best industrial practices in compliance
with what is required by our suppliers, leaders in their fields.
Written by
Approved by
Mathew Wolmarans
Daniel Kasper
Document Revision / Date
A – Original Issue / 2014-05-23
Page 7 of 8
(*) For specific Tq, Ta and lifetime data, contact BEKA Schréder
Page 8 of 8