Net configuration
(Complete a table for each net )
Net 1
Net measurements
Net opening (mouth)
- Maximum vertical opening (m)
25
- Maximum horizontal opening (m)
30
- Net circumference at mouth1 (m)
231
Mouth area (m2)
3,268
Panel average mesh size3 (mm)
1
2
3
Outer2
Inner2
1st panel
240
2nd panel
200
3rd panel
160
4th panel
160
5th panel
150
40
6th panel
140
40
7th panel
140
30
8th panel
140
25
9th panel
140
20
Final panel (Codend)
120
15
Expected in operational conditions.
Size of outer mesh and inner mesh where a liner is used.
Inside measurement of stretched mesh based on the procedure in Conservation Measure 22-01.
Net diagram(s): SEJONG
For each net used, or any change in net configuration, refer to the relevant net diagram in the CCAMLR fishing
gear library if available (www.ccamlr.org/node/74407), or submit a detailed diagram and description to the
forthcoming meeting of WG-EMM. Net diagrams must include:
1. Length and width of each trawl panel (in sufficient detail to allow calculation of the angle of each panel
with respect to water flow.)
2. Mesh size (inside measurement of stretched mesh based on the procedure in Conservation Measure 22-01),
shape (e.g. diamond shape) and material (e.g. polypropylene).
3. Mesh construction (e.g. knotted, fused).
4. Details of streamers used inside the trawl (design, location on panels, indicate ‘nil’ if streamers are not
in use); streamers prevent krill fouling the mesh or escaping.
Net 2
Net measurements
Net opening (mouth)
- Maximum vertical opening (m)
25.0
- Maximum horizontal opening (m)
27.6
- Net circumference at mouth1 (m)
225.28
Mouth area (m2)
3,145
Panel average mesh size3 (mm)
Outer2
Inner2
1st panel
240
2nd panel
240
3rd panel
240
4th panel
160
5th panel
160
6th panel
160
50
7th panel
140`
40
8th panel
140
30
9th panel
140
25
10th panel
130
20
Final panel (Codend)
120
15
1
Expected in operational conditions.
2
Size of outer mesh and inner mesh where a liner is used.
Inside measurement of stretched mesh based on the procedure in Conservation Measure 22-01
3
Net diagram(s): SEJONG
2016년 어기 KRILL 내장망
Nylon RASCH
20Ply
*
50mm
422
392 352
SIDE
522
1:1=220
1:2=31
296
40
281
362
370
470
490 440
1:1=45
2:1=169
356
263
343
364
470
580 513
1:1=55
2:1=199
513
254
1:1=175
2:1=127
336
67
237
319
302
403
696 616
2:1=32
3:1=176
616
210
2:1=256
3:1=16
282
80
25Ply
*
20mm
1:1=145
2:1=109
50
67
25Ply
*
25mm
440
274
50
20Ply
*
30mm
1:1=144
1:2=88
376
40
20Ply
*
40mm
352
TOP
80
198
267
260
352
870 770
4:1=154
5:1=14
770
176
100
3:1=130
4:1=70
252
100
176
252
For each net used, or any change in net configuration, refer to the relevant net diagram in the CCAMLR fishing
gear library if available (www.ccamlr.org/node/74407), or submit a detailed diagram and description to the
forthcoming meeting of WG-EMM. Net diagrams must include:
1. Length and width of each trawl panel (in sufficient detail to allow calculation of the angle of each panel
with respect to water flow.)
2. Mesh size (inside measurement of stretched mesh based on the procedure in Conservation Measure 22-01),
shape (e.g. diamond shape) and material (e.g. polypropylene).
3. Mesh construction (e.g. knotted, fused).
4. Details of streamers used inside the trawl (design, location on panels, indicate ‘nil’ if streamers are not
in use); streamers prevent krill fouling the mesh or escaping.