Rechargeable LED Work Light Owner’s Manual 8097180 Safety and Use 1. For the best performance and life of the batteries, fully charge the batteries for 8 to 10 hours prior to the first use. 2. Operating environment: • Don not use or charge when temperature exceeds 104°F (40°C) or is lower than -4°F (-20°C) • Do not place near over-heated objects • Keep away from acid and alkaline objects • Avoid bumps and dropping 3. Charging instructions: • Turn the light off and connect to the supplied charger • The red indicator LED comes on when charger is plugged in. • When the green indicator LED comes on the light is fully charged. • Normal charging takes about 3 to 5 hours. The charger can remain plugged in after charge is completed as it will reduce the charge to a maintaining level of current. 4. This unit is not waterproof and is not intended to be used in showers, saunas or any other potentially wet locations. Keep this unit away from sinks, tubs and showers. Retrieving appliances if they fall into the water while plugged in can be fatal. 5. This unit is intended to be used for general indoor lighting. It is not intended to be used in potentially dangerous locations such as flammable or explosive atmospheres. 6. Warning: Do not look directly into the light during operation of the device. This can be harmful to the eyes even for a brief period due to intense light. Technical Specifications • Power source: 7.2V 7,200 mAh Rechargeable Ni-Mh battery • 300 LEDs • Rated LED life: 80,000 hours • Charger input: 120V AC 60Hz • Charger output: 12V DC 300 mA • Charging time: 3 to 5 hours Red LED (charging indicator light End Cap LED Board Hanging Hook Green LED (fully-charged indicator light) Handle On/Off Switch Charging Port
© Copyright 2026 Paperzz