CONVERT
YOUR
POOL TO
MINERAL
WATER.
•Produces soft and natural
feeling water
•Moisturises your skin as you swim
•Conditions your hair
•Gentle on sensitive skin
•Provides a natural relief to
muscular complaints
•Relaxes your nervous system
•Produce a mild floccing agent
enhancing water quality
NEW
PACKAGING
Create a
mineral
bathing
destination
in your own
backyard.
CONVERT YOUR POOL
TO MINERAL WATER.
WHAT IS ENHANCED MINERAL ADDITIVE?
The idea of mineral bathing is a centuries old phenomenon and conjures up the idea of a luxurious experience, rejuvenation, relaxation
and enhanced water quality.
By using Theralux Enhanced Mineral Additive, you are adding naturally occurring minerals to your swimming pool, or spa (Spa pack size
available), allowing you to bathe in water that provides health and wellbeing benefits to you and your family. It is compatible with all
types of sanitising systems so any pool or spa owner are free to enjoy the benefits of this miracle mineral.
The addition of Enhanced Mineral Additive will give the water a soft silky feel whilst moisturising and conditioning the bather. The
minerals will naturally be absorbed through the skin to detoxify the body, relax the nervous system and provide relief to any muscular
complaints. It also enhances the waters ability to absorb calcium and other minerals which cause cloudy water. The Enhanced Mineral
Additive will also assist in maintaining better water balance and reduce pH fluctuation.
DISCOVER HOW AFFORDABLE AND EASY IT IS.
Theralux Enhanced Mineral Additive is the easiest and most economical method of converting your pool into a mineral bathing oasis.
Step 1 Simply test and balance your pool water as you have always done using the same sanitizer, keeping within the standard
parameters as per Australian Standards (please refer to the table below).
Please note, if you are using a salt chlorinator you must maintain the TDS levels that are recommended by the products manufacturer. If you are using the Therachlor SMC chlorinator, please ensure your TDS is at least 4000ppm or above.
Step 2 Once you are within the parameters and you have the correct TDS levels maintained, simply add in 6kg per 10,000 litres of Enhanced Mineral Additive and top up the minerals every 5 to 6 months using 3kg per 10,000 litres. It’s that simple.
DOSAGE RATES
Pool Volume
Dosage Rate (Initial Start up)
Dosage Rate
(Maintenance / 6 monthly)
10,000
6kg
3kg
20,000
12kg
6kg
30,000
18kg
9kg
40,000
24kg
12kg
50,000
30kg
15kg
100,000
60kg
30kg
WATER BALANCE PARAMETERS (AS PER AUSTRALIAN STANDARDS)
Free chlorine
pH
Total Alkalinity
Calcium
Hardness
Cyanuric Acid
TDS Level
Theralux Ideal
Range
1.0 - 3.0
7.2 - 7.6
80 - 120
200 - 400
30 - 50
4000ppm TDS
2750ppm
Sodium
To raise
Add a shock
or increase the
production on your
salt chlorinator
Add Soda Ash (pH Up)
Add Sodium
Bicarbonate
(Alkalinity Up)
Add Calcium
Chloride (Water
Hardener)
Add Cyanuric
Acid
(Sunblock)
Add Sodium
To reduce
N/A
Add acid (Pool
Acid or pH Down)
Add acid (Pool
Acid or pH Down)
Dilute with fresh
source water
Dilute with fresh
source water
Dilute with fresh
source water