| DATA SHEETS |
Datasheet: 10/100 Low Speed Ethernet ASE SKU 01890 Part
Number 3511003
Key Features:
Supports IP Transport and OmniPoint software
Capable of Inline placement with MSP certified fail to wire
Last mile keep alive upon CPE Router failure provides 100%
availability and fault isolation
Configurable to support IPV4 or IPV6 management and monitoring
Inband and LAN management capable
Pro-active real time SNMP events with event forwarding
Continuous 1 second monitoring with burst analysis
Layer1 through 7 auto-detection and analysis
Server and application response time baselines and alarms
30 Concurrent VoIP calls with MoS scores
155 site to site SLA metrics per CoS
Rogue application discovery
On demand remote packet capture when required
Overview
The TruView and Visual Performance Manager 10/100 Ethernet ASE enhances the analysis functionality of the Low Speed TruView and Visual
Performance Manager system for Ethernet networks. The ASE provides up to 6 Mbps of detailed network traffic analysis and management while
maintaining full wire speed pass-through of all traffic. It supports both IP transport and OmniPoint software. When deployed inline, the ASE
includes LinkSafe™ technology to protect circuit integrity in case of an ASE outage, as well as power failure notification.
Designed for business-class DSL, cable and routers that do not support NetFlow data, the 10/100 NetFlow inline ASE has a wide variety of
deployment options. The 10/100 Ethernet inline ASE has a wide variety of deployment options. The Low Speed Ethernet ASE is typically
deployed as an inline probe on the access line between LAN devices such as the LAN switch and router. (See Option 1). Other options include
positioning the ASE on the Ethernet segment between a subscriber's router and a network terminating unit (NTU) such as a DSL modem or a
service provider switch (Ethernet as WAN access) (See Option 2), or connecting the ASE to a router or switch SPAN port.
The IP Transport and OmniPoint ASE is designed to support real timesynchronized troubleshooting for the network, applications, and VoIP.The
unit supports on demand traffic captures, as well as real time custom configurable SNMP traps for rapid Mean Time to Identify analysis.
Ethernet probe model 807-0120 front view
Ethernet probe model model 807-0120 rear view
Option 1. Ethernet inline probe model 807-0120 deployed after the customer edge
router.
Option 2. Ethernet inline probe model 807-0120 deployed in front of the customer
edge router.
1 of 3
Ethernet inline probe ASE specifications SKU 01890 Part Number 3511003 Model 113
General
Environment
Power Requirements
Dimensions
7.5" (19.1 cm) x 6" (15.2 cm) x 1.5" (3.8 cm)
Weight
2.10 lbs.
Maximum Data Rate
100 Mbps
Operating Temperature
0º to +40ºC (+32º to +104 º F)
Storage Temperature
-20º to +55ºC (-4º to +131º×F)
Clearance Requirement
Minimum of 3" (7.62 cm) space on sides.
Input
100 to 240 VAC
Frequency
50/60 Hz
Input Current Rating
0.5 amps
Bit Rate
10/100 Mbps
Connector
8-pin modular jack: RJ-45
Baud Rate
19200 or 9600 bps
Parity
8 data bits, no parity
Stop Bit
1 stop bit
Electrical Format
EIA RS-232, DTE
Connector
RJ-45
LAN and WAN Ethernet Interface
Serial Port Interface
2 of 3
What are ASEs?
ASEs (Analysis Service Elements) are data collection and network performance monitoring hardware devices placed on a wide area network
(WAN) or Local Area Network (LAN) as part of the TruView and Visual Performance Manager systems. ASEs offer in-depth, real-time, and
historical visibility into the performance of an applications infrastructure. Data gathered by ASEs is stored in the VPM server and displayed and
analyzed from the Web portal interface. As a service level management tool, ASEs indicate when services are being met, provide warnings when
services start to degrade, and send alerts when services are not met.
What is TruView and Visual Performance Manager
TruView and Visual Performance Manager are flexible solutions that can scale to help the largest enterprises, carriers and managed service
providers decrease the cost of performance management, increase revenue, and optimize utilization of existing assets. This is accomplished by
enabling IT organizations to become a source of competitive advantage, not a cost center, by providing actionable visibility into a centralized
integration point for managing applications, VoIP network and server performance across a complete network.
Hardware Support
Enhanced ASE hardware warranty service programs are available to help you maximize your investment in TruView and Visual Performance
Manager. For more detailed warranty information, visit www.netscout.com
Software Maintenanced
Each hardware ASE is managed remotely by the TruView or Visual Performance Manager. Maintenance is dependent on the software module
purchased. For more detailed maintenance information, visit Inside Sales at the number below.
Professional Services
Professional services are available for installing, maintaining and customizing your solution your ASE hardware and TruView and Visual
Performance Manager solution. Replacing the hardware on site with or without a technician is offered worldwide.
Ordering Information
For more details, please visit www.netscout.com.
With LinkSafe capabilities
© 2017 NETSCOUT. Rev: 02/02/2017 9:39 am (Literature Id: 4262825)
3 of 3