SHORE-KLEAR
Shore-Klear is a glyphosate product much stronger
than Round-up and is registered with the EPA for
aquatic use. Round-up is illegal to use in ponds.
The glyphosate in Shore-Klear works as a broad
spectrum, root killing, systemic herbicide. Shore-Klear
controls a broad spectrum of floating and immersed
weeds in and around surface waters. Great on land
too!
Size
Application
1 Quart
Treats .25 to .32 acres
Effectiveness
CATTAILS
Excellent
BULRUSH
Excellent
GRASS FAMILY
Excellent
Thorough systemic action. Applied directly to exposed
foliage, Shore-Klear Liquid is absorbed by the weed,
killing roots and all. Effective on weeds that have most
of their foliage above water. Will not work on
submersed weeds.
REED GRASS
Excellent
SPATTERDOCK
Good
WHITE WATER LILY
Good
AMERICAN LOTUS
Good
PICKEREL WEED
Good
PURPLE LOOSESTRIFE
Good
Works on most green vegetation.
WATER PRIMROSE
Good
WATER SHIELD
Good
Initial results occur in 2 to 4 days. Results begin with
wilting and yellowing followed by full browning. Well
established heavy growth will require 1 to 3 weeks to
show results.
WATER WILLOW
Good
Application
SMARTWEED
Fair
Water Use Restrictions
Active Ingredients: Isopropylamine salt of glyphosate
Use 1 to 3 ounces of Shore-Klear Liquid and 1 oz. of
the manufacturer recommended non-ionic surfactant
Cygnet Plus. Add water to make 1 gallon of solution.
Apply with a Tank Sprayer. Uniformly wet foliage, but
not to the point of runoff.
Weight % Active Ingredient: 53.8
EPA Reg.No.
228-365-8959
Number of Days
Human Drinking
0
Human Swimming
0
Human Fish Consumption
0
Animal Drinking
0
Turf Irrigation
0
Forage Irrigation
0
Food Crop Irrigation
0
Shore-Klear Examples:

Sample
100ft
x100ft
Lakeshore
Lot
(10,000
sq
ft)
*
Amount of Shore-Klear required: One Quart. Actual amount used +/- due to plant species
and densities.

Sample
Mixing
Rate
for
Cattail
control
(3/4%
Solution).
*
Amount of Shore-Klear required: Less than 1 Ounce (.96) per Gallon of water plus a nonionic surfactant.
Coverage with Shore-Klear Liquid varies depending on the type of weed treated and density
of growth.
*Consult Label for Exact Doses & Important Application Directions.
Application rates vary, but generally 3 or 4 oz of Shore-Klear and 3 or 4 oz of Cygnet
Plus per gallon of water is sufficient. Typically 100 gallons of spray solution will cover 1 acre.
Well established perennial weeds, such as Cattails and Water Lilies, may require a second
treatment in 3 weeks. Certain species of plants such as poison ivy require a strong
concentration of product. See label for species specific rates.
For Best Results
Apply Shore-Klear Liquid in mid to late season. Best results are obtained when applied to
actively growing, well developed foliage. A six hour rain free period following application is
required for proper herbicide absorption. Effective control of most green vegetation.
Notices
*All pesticides can be harmful to health and the environment if misused. Read the label and
follow directions. Consult with your local regulatory agency before applying herbicides and
algaecides to public waters. There are herbicides from other states that are either not
licensed in Wisconsin or Illinois, or are not recommended by ABI.
A WI DNR Aquatic Plant Control Permit or DATCP Fish Farm License is required in WI in
order to apply algaecides or herbicides. In addition ponds and lakes with overflows not
contained on the property are required to obtain a WPDES permit. Illinois Residents are
required to obtiain NPDES permits through the Illinois EPA.