Data Acquisition Device | Swarm
Description
The data acquisition unit (Swarm) collects the electrical
data (current, voltage, power) of solar modules by wirelessly communication with GNE power optimizers and
connects to monitoring devices by RS485 cables.
It enables module-level monitoring, alerts, and greatly
improves safety with module-level deactivation.
Available for utility, commercial and residential solar energy
installations.
Features
1. Wireless dynamic Ad hoc network
2. Data acquisition and transmission in real time
3. Stable communication, packet loss rate <0.1%
Technical Data
INSTALLATION
SPECIFICATION
Communication
RS485
Wireless Range
≤50 M
Band
Max Number of devices
12 Vdc
Working Current
25 mA
Power Consumption
0.3 W
124×99x32 mm
Weight
155 g
Input Linker
RS485
Output Linker
RS485
Working Temperature
﹣40℃ ~ +85℃
Inbreaking Protection
IP65
Certificates
01
≤400 Units
Input Voltage
Size (L*W*H)
PRODUCT
SPECIFICATION
915MHz / 2.4GHz
www.gnetek.com
CE, TUV, CQC
Data Acquisition Device | Swarm
Sketch
Installation
GNE swarms are installed in the center of each array they manage, and can be
conveniently mounted to the racking. It works seamlessly with all standard photovoltaic
modules and inverters.
①. Place on the racking system
in the center of sub-array
50m
②. Link Beehive to the first
Swarm with RS485 wire
③. Connect more Swarm (s)
in series if needed
Connec�on
to next Swarm
Last Swarm or single
Swarm installa�on
Inbound from Beehive
or previous Swarm
www.gnetek.com
02