VCOM SIP Audio Interface
The SIP1A device is a single connection SIP
device that provides a 4-wire audio
connection to HME, Telex, Tempest and Radio Active Design (RAD) wireless intercoms
for use with VCOM. For smaller deployments, the SIP1A can replace the Audio Input Device (AID-12 & AID-16) at a fraction
of the cost. The SIP1A has minimum requirements for connectivity and configuration allowing for rapid deployment.
 SIP Connection for wireless intercoms
 Configured in VCOM system admin
application as a 4-Wire SIP device.
 PoE device using standard IEEE 802.3AF
15.4 Volt DC Power.
 Red light illuminates when unit is
powered.
 Rugged metal enclosure with black powder coat finish.
 Entire unit weighs 2.2 lbs.
Inside the box:
 The SIP1A unit with network
& audio RJ45 connections.
 Cable for connecting to the
wireless intercom (Radio
Active Designs or Telex). The
cable for HME or Tempest
must be specially requested.
 Quick Start Guide
BHI Energy | Power Services 640 Douglas Ave, Suite 1504, Altamonte Springs, FL 32714
Contact Info: voice (407) 339 6113; fax (407) 331 9571; or email [email protected]