_________________________________________________________________
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
Indicate here if this is an Interim Report or the Final Report: Interim:
Final:
This document must be in “Print Layout” under the View menu in order to see some of the text boxes.
Refer to Experience Guideline 1 for detailed instructions on completing this form. Brief instructions are provided here:
Complete sections A through D, and Parts 1 to 4. Both the supervisor and mentor (if required) answer questions and fill
in comments on each page of Parts 1 to 6. This form must be shared electronically if possible so that the
supervisor(s) and mentor(s) have an opportunity to enter comments. Print all pages up to the end of the Report
Summary Form when it is completed (8 pages minimum). Please ensure that the footer containing spots for initials are
not deleted. After printing, the applicable supervisors and mentors must initial the bottom of each page and sign
Part 6.
A. PERSONAL INFORMATION
Name: Click on shaded areas to complete each form field
Preferred E-mail:
Registration #:
Note: An email must be sent to [email protected] to formally update contact information.
Bachelor degree (month/yr completed):
Discipline:
Masters degree (month/yr completed):
Discipline:
Doctorate degree (month/yr completed):
Other degree (month/yr completed):
University:
University:
Discipline:
Discipline:
University:
University:
B. EMPLOYER INFORMATION FOR THE REPORTING PERIOD
Employer name: Click on shaded areas to complete each form field Job title:
Business address (include postal code):
Business phone:
Fax:
Work E-mail:
Nature of business:
Brief description of job duties (five lines maximum):
Employment dates with this employer (mm/dd/yyyy):
to
This report covers experience from (mm/dd/yyyy):
to
Number of months:
x Percentage of full-time:
%=
Engineer-in-Training: ________________________________
Signature
months credit applying for.
__________________
Date
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 1 OF 9
C. SUPERVISOR INFORMATION (start with the current or most recent supervisor for the reporting period)
Name: Click on shaded areas to complete each form field P.Eng.
P.Geo.
Neither
(place an “X”
beside all that apply). If P.Eng. or P.Geo., in which province(s) are you registered?
If not P.Eng. or P.Geo., indicate the country where you are an engineer or geoscientist, if applicable:
I have known/knew the engineer-in-training for
years in my capacity as his/her supervisor. Dates:
Current business address (include postal code):
Current business phone:
Fax:
E-mail:
Other Supervisors in this reporting period:
(If more than one supervisor, attach additional pages with the same information as above)
Affirmation: By signing the last page of this form, I affirm that I have read and am familiar with Experience Guideline
2 - Components of Acceptable Engineering Work Experience, as it applies to work experience reporting for APEGS.
D. MENTOR INFORMATION (start with the current or most recent mentor for the reporting period)
Mentor required only if the direct supervisor is not a P.Eng. or P. Geo. Refer to Experience Guideline 1 for mentor information.
Name: Click on shaded areas to complete each form field
P.Eng.
P.Geo.
(place an “X” beside all that
apply). In which province(s) are you registered?
I have known/knew the applicant for
years in my capacity as his/her mentor. Dates:
Employer:
Current business address (include postal code):
Current business phone:
Fax:
E-mail:
Nature of business:
Other Mentors in this reporting period:
(If more than one mentor, attach additional pages with the same information as above)
Affirmation: By signing the last page of this form, I affirm that I have read and am familiar with Experience Guideline
2 - Components of Acceptable Engineering Work Experience, as it applies to work experience reporting for APEGS.
E. DESCRIPTION OF EXPERIENCE
Experience Guideline 2 - Components of Acceptable Engineering Work Experience describes of the areas of experience
referred to in the following pages of this form where you will provide examples of what you have done over this
reporting period. Also refer to Experience Guideline 1 for information on work experience reporting.
If you worked for the same company, had more than one supervisor or mentor in this reporting period and you use
examples from work performed under previous supervisors, please identify which supervisor each example pertains to.
Refer to Experience Guideline 1 for further information on multiple supervisors for the reporting period or click here.
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 2 OF 9
Part 1 - APPLICATION OF THEORY
(Click here to view an explanation of Application of Theory)
I have gained experience in the following areas of application of theory in this reporting period (type an “X” in the box
to the right of all those that apply). These areas are described in detail in Experience Guideline 2.
Analysis
Design and synthesis
Testing methods
Implementation methods
Work experience examples for Application of Theory in this reporting period: (click here for further instructions)
Supervisor/Mentor name(s):
Examples for the period (mm/dd/yyyy): from to
(Copy the above two lines for different supervisors/mentors and corresponding time periods if needed)
Analysis
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Design and Synthesis
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Testing methods
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Implementation methods
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Supervisor/Mentor Evaluation of Part 1 - Application of Theory
Is the experience consistent with satisfactory progress toward the professional designation? Refer to Experience
Guideline 1 for the definition of satisfactory progress or click here.
Yes ___________ No __________ (Supervisor (and mentor if applicable) to indicate Yes or No)
Comments (click here for further instructions)
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 3 OF 9
Part 2 - PRACTICAL EXPERIENCE
(Click here to view an explanation of Practical Experience)
I have gained experience in the following areas of practical experience in this reporting period (type an “X” in the box
to the right of all those that apply). These areas are described in detail in Experience Guideline 2.
Studying or being exposed to existing engineering works
Application of equipment in larger systems
Limitations of practical engineering
Significance of time
Work experience examples for Practical Experience in this reporting period: (click here for further instructions)
Supervisor/Mentor name(s):
Examples for the period (mm/dd/yyyy): from to
(Copy the above two lines for different supervisors/mentors and corresponding time periods if needed)
Studying or being exposed to existing engineering works
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Application of equipment in larger systems
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Limitations of practical engineering
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Significance of time
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Supervisor/Mentor Evaluation of Part 2 – Practical Experience
Is the experience consistent with satisfactory progress toward the professional designation? Refer to Experience
Guideline 1 for the definition of satisfactory progress or click here.
Yes ___________ No __________ (Supervisor (and mentor if applicable) to indicate Yes or No)
Comments (click here for further instructions)
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 4 OF 9
Part 3 - MANAGEMENT OF ENGINEERING
(Click here to view an explanation of Management of Engineering)
I have gained experience in the following areas of management of engineering in this reporting period (type an “X” in
the box to the right of all those that apply). These areas are described in detail in Experience Guideline 2.
Planning
Scheduling
Other (specify)
Budgeting
Supervision
Project control
Risk assessment
Work experience examples for Management of Engineering in this reporting period: (click here for further instructions)
Supervisor/Mentor name(s):
Examples for the period (mm/dd/yyyy): from to
(Copy the above two lines for different supervisors/mentors and corresponding time periods if needed)
Planning
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Scheduling
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Budgeting
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Supervision
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Project Control
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Risk Assessment
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Other
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Supervisor/Mentor Evaluation of Part 3 – Management of Engineering
Is the experience consistent with satisfactory progress toward the professional designation? Refer to Experience
Guideline 1 for the definition of satisfactory progress or click here.
Yes ___________ No __________ (Supervisor (and mentor if applicable) to indicate Yes or No)
Comments (click here for further instructions)
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 5 OF 9
Part 4 - SOCIAL IMPLICATIONS OF ENGINEERING
(Click here to view an explanation of Social Implications of Engineering)
During this reporting period, my awareness of the social implications of engineering has been heightened in the
following areas (type an “X” in the box to the right of all those that apply). These areas are described in detail in
Experience Guideline 2.
The value or benefits of engineering works to the public
Safeguards to protect employees and the public and mitigating adverse impacts
Engineering activity and the public at large (e.g. educational programs)
Interest and involvement in the broader social implications of engineering
Significance of regulatory agencies on the practice of engineering
Work experience examples for Social Implications in this reporting period: (click here for further instructions)
Supervisor/Mentor name(s):
Examples for the period (mm/dd/yyyy): from to
(Copy the above two lines for different supervisors/mentors and corresponding time periods if needed)
The value or benefits of engineering works to the public
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Safeguards
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Engineering activity and the public at large
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Interest and involvement in the broader social implications of engineering
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Significance of regulatory agencies
 Insert experience examples here, or delete this category if there are none. Include what you did, how you did it,
why you did it and the outcome.
Supervisor/Mentor Evaluation of Part 4 – Social Implications of Engineering
Is the experience consistent with satisfactory progress toward the professional designation? Refer to Experience
Guideline 1 for the definition of satisfactory progress or click here.
Yes ___________ No __________ (Supervisor (and mentor if applicable) to indicate Yes or No)
Comments (click here for further instructions)
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 6 OF 9
Part 5 - COMMUNICATION AND WORKING SKILLS
To be completed by the direct supervisor (and the mentor if applicable).
 Satisfactory (S): has met all expectations/norms and has exceeded some.
 Needs improvement (NI): performance is not wholly satisfactory, even though some expectations/norms have
been met or even exceeded. Comments are required below for each of the areas that need improvement.
(Click here for instructions on completing the table below)
Supervisor Mentor
SKILL AREAS
S
NI
S
NI
1. The Engineer-in-Training’s skills in oral communication (e.g., organization and clarity of
thought, appropriate language, responds to questions directly and fully) in discussions
with yourself as well as presentations to a group:
2. The Engineer-in-Training’s skills in written communication (e.g., organization and clarity,
appropriate language, being concise) in memoranda and reports (including e-mails):
3. The Engineer-in-Training’s skills in working with others (e.g., works cooperatively with
others, contributes ideas, listens to others, is tactful when disagreeing):
4. The Engineer-in-Training’s skills in time management (e.g., tasks or projects are generally
completed on schedule; is prompt for meetings; is able to set priorities):
5. The Engineer-in-Training’s ability to assume responsibility (e.g., work without close
supervision, willingness to take on new tasks or projects, suggests improvements):
6. The Engineer-in-Training’s character (e.g., maturity, professionalism, integrity):
Comments (click here for further instructions) - Comments are required for each item marked “NI”:
Part 6 - SUMMARY EVALUATION
Supervisor: The Engineer-in-Training is making either Satisfactory
or Below Satisfactory
toward earning the professional designation (place an “X” beside your selection).
click to insert #
# months credit
recommended *
Mentor:
________________________________
Signature **
________________
Date
The Engineer-in-Training is making either Satisfactory
or Below Satisfactory
toward earning the professional designation (place an “X” beside your selection).
click to insert #
# months credit
recommended *
progress
________________________________
Signature **
progress
________________
Date
* Insert the number of months experience credit for the reporting period. Factor in the % of full-time employment.
** This signature also pertains to the Affirmation on page 2.
* NEW: The next page must be completed if this is the “Final” Report.
The “Final” Report refers to the most recent experience that will be submitted and is the last report chronologically
before the professional member application is made. The Final Report is the one that is used to determine if a
member-in-training has met the minimum standard for professional licensure.
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 7 OF 9
* NEW: FOR THE FINAL REPORT ONLY:
These additional questions must be completed by the supervisor(s) and mentor (if applicable) if this is the Final Report.
Use multiple copies of this page if necessary. This Final Report reference page can be submitted directly to APEGS by
the supervisor(s) and mentors if desired.
Member-in-Training Name:
1. Do you believe the engineer-in-training knows the limits of their own knowledge and has the required judgment to
practice independently and safely as a professional engineer? If not, state reasons.
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
2. Do you believe the engineer-in-training will be able to take responsibility and accept accountability for professional
engineering work if licensed? If not, state reasons.
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
3. Do you believe the engineer-in-training has the required qualities of integrity, honesty and trustworthiness to be a
professional engineer? If not, state reasons.
______________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________________
4. Based on your knowledge of this applicant to date, do you recommend the engineer-in-training for registration as a
professional engineer? If not, state reasons and indicate where the applicant is lacking in exposure or requires
improvement.
______________________________________________________________________________________
_____________________________________________________________________________________
______________________________________________________________________________________
Name (please print): _____________________________
Signature: _____________________________________
Date: _______________________________
Don’t forget to also submit the Report Summary Form (RSF) on the following page
(RSF required whether this is the Final Report or not)
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 8 OF 9
REPORT SUMMARY and PLAN FORM (RSF form)
Member-in-Training Name:
Update and submit this form with each work experience report. Document experience in chronological order. Include
all experience, even that which you have not submitted yet, but plan to submit. Copy boxes and use extra pages as
required. Experience from after completing a bachelors, Masters or PhD is called “post-bachelors”. Indicate that the
report is Masters or PhD only if the report is for one of these degrees.
Reporting Period #1
Time period covered (mm/dd/yyyy): from
to
Employer Name: Click on shaded areas to complete each form field Job Title:
Number of months:
Percentage of full-time:
% Credit Received:
months (or type N/A)
Type of Experience: A) Canadian or International: Click here and type either "Canadian" or "International"
B) Pre-graduation, Post-bachelors, Masters, PhD: Click here and type one of the four
Reporting Period #2
Employer Name:
Number of months:
Time period covered (mm/dd/yyyy): from
to
Job Title:
Percentage of full-time:
% Credit Received:
months (or type N/A)
Type of Experience: A) Canadian or International: Click here and type either "Canadian" or "International"
B) Pre-graduation, Post-bachelors, Masters, PhD: Click here and type one of the four
Reporting Period #3
Employer Name:
Number of months:
Time period covered (mm/dd/yyyy): from
to
Job Title:
Percentage of full-time:
% Credit Received:
months (or type N/A)
Type of Experience: A) Canadian or International: Click here and type either "Canadian" or "International"
B) Pre-graduation, Post-bachelors, Masters, PhD: Click here and type one of the four
Reporting Period #4
Employer Name:
Number of months:
Time period covered (mm/dd/yyyy): from
to
Job Title:
Percentage of full-time:
% Credit Received:
months (or type N/A)
Type of Experience: A) Canadian or International: Click here and type either "Canadian" or "International"
B) Pre-graduation, Post-bachelors, Masters, PhD: Click here and type one of the four
Reporting Period #5
Employer Name:
Number of months:
Time period covered (mm/dd/yyyy): from
to
Job Title:
Percentage of full-time:
% Credit Received:
months (or type N/A)
Type of Experience: A) Canadian or International: Click here and type either "Canadian" or "International"
B) Pre-graduation, Post-bachelors, Masters, PhD: Click here and type one of the four
Supervisor initials _______ Mentor initials ______ (only if mentor is required)
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
PAGE 9 OF 9
SELF-CHECK LIST
(It is not necessary to submit this page with your experience report)
This self-check list will help ensure that you have completed all components and the report is written in a manner acceptable to the
Experience Review Committee. Before submitting your report to APEGS, the following items should have been completed and/or
checked over:
I have read and am familiar with the requirements as shown in the following documents:
1. Experience Guideline 1 – Guideline on Work Experience Reporting for Members-in-Training, Supervisors and
Mentors
2. Experience Guideline 2 for engineers-in-training
3. Experience Guideline 3 for geoscientists-in-training
4. The hyperlinks contained within the experience reporting form
I have downloaded and used a new experience reporting form from the APEGS Web site to ensure that I am using the most
recent version of the form.
This report covers experience for one job only (even if it was work done for the same employer, a change in job function
constitutes a change in job and thus a separate experience report for that work).
I have read the example reports on the APEGS Web site and those provided in Experience Guideline 1 and have written my
report in the same manner (i.e. the experience report is essentially a write-up of actual examples of the work you have
done).
Each point within the report is concise (i.e. only information needed in order to describe actual projects worked on is
included).
Each point within the report includes specific descriptions of actual projects I worked on.
Each point within the report is written in the first person singular (i.e. you have used the pronoun “I” followed by an
action). It is acceptable to provide a description of the work of the team you were a part of if that is the case, however, each
example should be concluded with a sentence beginning with “I” in order to specify your role. DO NOT use words such as
“assisted”, “involved with” or “participated” or similar general references to your work because these are not direct enough
in identifying the work you did personally.
If work is a continuation of experience reported in a previous report, then I have described the project(s) and also included
information on where specifically the project(s) have progressed and where I have progressed professionally (such as an
increase in complexity, difficulty and in the level of independent responsibility).
For thesis-Masters and PhD reports, I have attached the thesis abstract and list of publications.
All acronyms have been written out in full the first time they are used in the report.
I have edited the report carefully.
I have completed the Work Experience Report Summary Form and included all reports that I have previously submitted,
the current report and any future reports I plan to submit in order to obtain four years of experience credit. The reports are
listed in chronological order.
I have shared the experience report with my supervisor(s) (and mentor (s) if applicable) electronically so that they may
enter comments. (Comments entered by supervisors and mentors are very valuable to the Experience Review Committee
and have saved many experience reports from re-submission in the past).
My supervisor (and mentor if applicable) have signed the form in all the places requested. Note that supervisors and
mentors may submit your experience report directly to the APEGS office without your review. If that is the case and you
have not signed the report yet, we may contact you separately for a signature.
The main reason that reports must be resubmitted is that they contain general, vague statements that do not refer to specific projects
and it is not clearly stated whether the work described is the work of the member-in-training personally. If confidentiality of projects
is a concern, substitute project names and locations with surrogate names (for example, Project X located in Town Q).
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
SELF-CHECK LIST
HYPERLINKS CONTAINED WITHIN THE WORK EXPERIENCE REPORT FORM
(It is not necessary to submit these pages with your experience report)
Part 1 – APPLICATION OF THEORY
Application of theory is the most important work experience reporting area and its skillful application is the hallmark of
quality engineering work. A candidate’s experience shall include meaningful participation in several aspects of the four
theoretical areas listed on this page of the form prior to registration as a professional engineer. See Experience Guideline
2 for further information.
Click here to return to the form, Part 1 - Application of Theory.
Instructions for Work experience examples in Part 1 - Application of Theory
Provide six representative examples of your experience from at least two of the areas checked off. Use only the space
provided in the text box. If you did not gain experience in at least one area or cannot provide examples, please state why.
Click here to return to the form, Part 1 - Application of Theory.
Instructions for Comments from Supervisor/Mentor in Part 1 - Application of Theory
Comments are necessary here for additional feedback to the Experience Review Committee on the experience reported.
Please also include any additional information to augment the information reported. Comments to be completed
electronically if possible. Use as much space as necessary.
Click here to return to Comments from Supervisor/Mentor in Part 1 - Application of Theory.
Part 2 – PRACTICAL EXPERIENCE
Practical experience should provide the candidate with opportunities to become aware of the practical limitations of real
systems. See Experience Guideline 2 for further information.
Click here to return to the form, Part 2 - Practical Experience.
Instructions for Work experience examples in Part 2 - Practical Experience
Provide six representative examples of experience from at least two of the areas checked off. Indicate how this exposure
to practical experience has added to your understanding of the limitations of real systems. Use only the space provided
in the text box. If you did not gain experience in at least one area or cannot provide examples, please state why.
Click here to return to the form, Part 2 - Practical Experience.
Instructions for Comments from Supervisor/Mentor in Part 2 - Practical Experience
Comments are necessary here for additional feedback to the Experience Review Committee on the experience reported.
Please also include any additional information to augment the information reported. Comments to be completed
electronically if possible. Use as much space as necessary.
Click here to return to Comments from Supervisor/Mentor in Part 2 - Practical Experience.
Part 3 – MANAGEMENT OF ENGINEERING
Management of engineering works includes the supervision of staff, project management, a general exposure to an
engineering business environment, and the management of technology from a societal perspective. See Experience
Guideline 2 for further information.
Click here to return to the form, Part 3 - Management of Engineering.
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
HYPERLINKS CONTAINED WITHIN THE FORM
Instructions for Work experience examples in Part 3 - Management of Engineering
Provide one representative example of your experience in each of the areas you checked off. If you checked more than
three, choose the three that contributed most to your professional development. Use only the space provided in the text
box. If you did not gain experience in at least one area or cannot provide examples, please state why.
Click here to return to Work experience examples for Part 3 - Management of Engineering.
Instructions for Comments from Supervisor/Mentor in Part 3 - Management of Engineering
Comments are necessary here for additional feedback to the Experience Review Committee on the experience reported.
Please also include any additional information to augment the information reported. Comments to be completed
electronically if possible. Use as much space as necessary.
Click here to return to Comments from Supervisor/Mentor in Part 3 - Management of Engineering.
Part 4 – SOCIAL IMPLICATIONS OF ENGINEERING
The social implications of engineering is a critical aspect of the practice of engineering. The work environment should
provide realistic involvement for the candidate to heighten awareness of the potential consequences, both positive and
negative, of projects worked on. See Experience Guideline 2 for further information.
Click here to return to the form, Part 4 – Social Implications of Engineering.
Instructions for Work experience examples in Part 4 - Social Implications of Engineering
Provide one representative example of the activities that led to your awareness of the social implications of engineering
in each of the areas you checked off. If you checked more than three, choose the three that contributed most to your
professional development. Use only the space provided in the text box. If you did not gain experience in at least one area
or cannot provide examples, please state why.
Click here to return to the form, Part 4 - Social Implications of Engineering.
Instructions for Comments from Supervisor/Mentor in Part 4 - Social Implications of Engineering
Comments are necessary here for additional feedback to the Experience Review Committee on the experience reported.
Please also include any additional information to augment the information reported. Comments to be completed
electronically if possible. Use as much space as necessary.
Click here to return to Comments from Supervisor/Mentor in Part 4 – Social Implications of Engineering.
Part 5 – COMMUNICATION AND WORKING SKILLS
Instructions for completing the rating table in Part 5 - Communication and Working Skills
Given the stage of the Engineer-in-Training’s career, please rate the characteristics as shown with an “X” in the
appropriate box. If a mentor is reporting, discuss the points you are not certain about with the supervisor or place a “U”
for “unknown” in one of the mentor columns.
Click here to return to the rating table in Part 5 – Communication and Working Skills.
Instructions for Comments from Supervisor/Mentor in Part 5 - Communication and Working Skills
Comments required for each of the areas that need improvement. Please enter electronically and use as much space as
necessary for specific details and the plan for improvement. If an area has been flagged as “needs improvement”, it does
not necessarily mean that the experience will not be approved. It is important for the member-in-training to be made
aware of areas that require improvement and to tailor professional development activities to address those areas.
Click here to return to Comments from Supervisor/Mentor in Part 5 – Communication and Working Skills.
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
HYPERLINKS CONTAINED WITHIN THE FORM
OTHER HYPERLINKS IN THE FORM
Definition of satisfactory progress toward the professional designation: (excerpt from Experience Guideline 1):
Click on the light blue left arrow on the Web tool bar to return to your previous place in the forms OR click on one of
the following links to return to the Summary Evaluation for the Part you were working on: Part 1 – Application of
Theory, Part 2 – Practical Experience, Part 3 – Management of Engineering, Part 4 – Social Implications.
It is understood that the member-in-training’s work experience may be of a routine nature at the beginning of the
training period. It is expected that there will be progression in the nature of the work, for example, different projects and
experiences, an increase in complexity, difficulty and in the level of responsibility. Thus, the standards are normally
expected to increase with experience. However, in some types of work, these factors remain the same even when
measured over extended periods (for example, between the second and fourth years). In such cases, the number of
months to be credited by the Experience Review Committee will be based on whether the work is classified as
professional experience or not.
Professional experience includes work performed under the general guidance of performance standards requiring
engineering knowledge and education. Original thinking in the analysis and/or synthesis of engineering problems is
required to achieve the end results. The professional has the ability to make decisions pertaining to his or her work and
assumes technical responsibility in developing the end result.
In crediting the number of months, emphasis is placed on the application of theory and practical experience in the earlier
stages of the engineer-in-training’s career. However, the individual should demonstrate a reasonable level of social
awareness even in the first report. Involvement in the management of engineering is normally expected to increase over
the engineer-in-training’s career, and should be balanced against technical engineering experience. Where the individual
has been working in an exclusively technical role, then the application of theory and practical experience, given a
reasonable level of social awareness, will be the basis of judgement. Where the role has become primarily management,
the question of whether the individual was managing an engineering function is the guiding factor. The requirements for
professional membership may still be fulfilled even though experience has not been gained in the management of
engineering. In general, in order to be prepared for professional registration, experience shall include the application of
theory and include an exposure to the broad areas of practical experience, management, communication and the social
implications of engineering.
Information on Multiple Supervisors
If there was more than one supervisor or mentor for the reporting period, the most recent supervisor is asked to provide
the feedback required for the entire reporting period. If you have provided examples from other supervisors and your
current supervisor / mentor feels uncomfortable in providing feedback on that experience, please contact the previous
supervisor or mentor to assist in the evaluation or circulate the report to those people for their review and signatures
also.
Click here to return to your previous spot in the form.
ENGINEER-IN-TRAINING REPORT ON EXPERIENCE
HYPERLINKS CONTAINED WITHIN THE FORM