352848_OPT16640_1400221_E5331_8pp Page 3
Monday, 19 August, 2013 3:06 PM
▲
Whilst every care has been taken in producing
your artwork, the final responsibility for release
to the printer lies with you, our valued client.
Please check this proof carefully before
approving for supply to print.
CALL US
For further assistance, you can call Optus Technical
Support on 133 697. Or if you’re a Small Business
customer, you can call Optus Business Technical
Support on 1300 589 914. Make sure you have your
service number with you.
Say hello to Your
ShinY new modem
A
Signal indicator
B
WiFi indicator
C
Battery indicator
D
352848_OPT16640_1400221_E5331_8pp.indd 1-4
E
Item
SMS indicator
E
Strap hole
F
Power button
G
USB port (Micro USB Type B)
AB C D
Icon
Signal
Indicator
Green
Strong signal
Orange
Weak signal
Red
No signal
WiFi
Green
WiFi turned on
Battery
Green
Sufficient battery
Blinking green
F
Red
SMS
G
Status
Green
Blinking green
Charging
Note: the battery
indicator ( ) blinks
slowly when the
Mobile WiFi enters
standby mode, and
the other indicators
are off.
To turn on the other
indicators, press
any key.
Low battery
IN THIS GUIDE
YOU’LL LEARN HOW
TO CONNECT YOUR
SHINY NEW MODEM
The incredibly easy guide to installing
your E5331 Mini WiFi Modem.
New message
Inbox full
OPTUS16640/1400221 (08/13)
19/08/13 3:06 PM
352848_OPT16640_1400221_E5331_8pp Page 7
Monday, 19 August, 2013 3:06 PM
▲
Whilst every care has been taken in producing
your artwork, the final responsibility for release
to the printer lies with you, our valued client.
Please check this proof carefully before
approving for supply to print.
STEP 1 POP
STEP 2 get
IN YOUR NEW SIM
A.
B.
C.
D.
charging
If you’re using your WiFi Modem for
the first time, you’ll need to charge it.
Just connect the supplied USB cable
to your WiFi Modem and then to
your computer.
Note: it can take up to 12 hours to fully
charge your battery, but you
can still use the modem while
it’s charging.
Pop open the back cover
352848_OPT16640_1400221_E5331_8pp.indd 5-8
Insert the SIM card into the
slot. Ensure it’s facing the right way
Insert the battery. Ensure it’s
facing the right way
Before you replace the cover, write
down the Wireless Network Connection
name (SSID) and Security Key
(WiFi Key) on the inside back cover
STEP 3 POWER
ON
To turn your WiFi Modem on, just
press and hold the
Power button
until the display lights up.
STEP 4 START
’ER up
Your WiFi Modem will now connect
to the Optus network. You are now
ready to connect other devices to
the modem via WiFi.
Are you a Prepaid customer?
You’ll also need to activate your SIM.
Just follow the instructions in your
guide to getting started.
SETTINGS
To access the settings menu of
the WiFi Modem:
• Open a web browser
STEP 5
Get CONNECTED
To connect a device to the modem
via WiFi you will need to provide:
• Wireless Network Connection
name (SSID) and
• Security Key (WiFi Key).
• In the address field, type
http://192.168.1.1 and press Enter
• Enter the username and password
and then click Login (the default
username and password is admin)
Note: when the light is blinking,
the modem is registering on the
Optus network.
19/08/13 3:06 PM