Main features:
1).Elegant Integrated Design , Aluminum alloy case.
2).48LEDs super bright , 1000Lumens brightness equal
to 150W normal lamp.
3).15W solar panel and battery can be
replaced. 4).Night sensor+PIR motion
sensor 5).120°wide lighting angle.
6).Support around 3 nights lighting time.
7).Easy to install and Auto
on/off/PIR. 8).3 years warranty.
Electrical Characteristics:
1).Solar panel :15W Polycrystalline Silicon
2).Li-ion battery : 3.7V, 26000mAh battery can be
replaced easily by users.
3).LED:1000 Lumens bright light ,2700K~6500K
4).Smart energy saving lighting mode:
Auto switch off for sun charging in daytime
Auto light 5Hrs at night time
Turn on dim light with PIR motion sensor till dawn
5).Lighting time: more than 3 nights
6).Install height: 3~4meters
7).Waterproof:IP65
8).Material:Aluminium alloy+steel glass
9).Work temperature:-25 ℃ to 65℃
10).Size: 808*227*164mm
Operation Instructions:
How to unlock the working system?
The internal battery is locked from factory for safety
shipment ,so users have to use supplied key pin to
click the “on/off”socket and unlock the battery and
lighting system.
If need to lock(turn off) the light , please use the
pin to click the on/off socket again.
2.How to install the device?
Please notice to install the light to the place without
any shade and better face to sun light directly for
better charging.
For street/roadway lighting,we suggest to install 10M
distance between each light.
① The switch
Application:
Courtyard/Garden/Park/Street/Roadway/Pathway
/Parking lot/private road/Sidewalk/Public square
/Plaza/Campus/Airfield/Farm&Ranch/Perimeter Security
/Wildlife Area/Remote Area/Military Base
② PIR
③ Light panel
④ Assembling bolt
⑤ Gasket
⑥ Hoop
⑦ Nut
⑧ Solar panel
3.How it’s charged by sunlight?
The light will switch off during sun charging in daytime ,
normally the light battery has 30%~50% power left from
factory, and it needs 9~10 hours sunlight to fully charge the
battery.
Notice :
the charging time is under ideal bright sunlight charging
condition at 1000W/ ㎡
illumination intensity ,
temperature >25 ℃，so the real charging time may
according to the local sunlight power
4.How’s the light working?
1).Light switch off for sun charging in daytime.
2).Auto turn on Dim light at evening when ray<10lux
3).It’s gradually turn on bright light along with the day go to fully
black.
4)Bright light:5 hours without PIR
5)Dim light: Dim light till dawn with PIR function. When people
come 5~8m near, it will turn on bright ,while people leaving
,the light will turn on dim light. 6)Light switch off in the morning
Notice:
If you want it to do longer continuous bright lighting ,
please use the supplied key pin to click the“on/off”
socket and start another 5 hours circulate lighting
system.
5.How’s the light saving energy?
1).It only can turn on light in dark at night controlled by night
sensor,Ray<10Lux.
2).It will auto turn on dim light with PIR motion sensor
after 5 hours, when people pass by it will turn to bright
light, if no people near it will keep dim light for power
saving.
3).The battery capacity is big enough and can save energy for
about 3 nights lighting if meet cloudy days without sunlight
charging.
Working process instructions
Please fasten the light
to the pole by the bolt
Replace the inside battery work as the picture
when the battery span life is in the end.
Use the supplied key pin to click the
“on/off” socket to unlock the battery
Warning：
1.Keep the device away from fire and oil in order to
avoid any fire or explosion;
2.Any severe shock or smash to the light is not
recommended；
3.No one except professional technicians should
attempt to disassemble the light in order to avoid
damaging the light.
Special Note:
1).Please notice to unlock the battery and working system
by supplied Key Pin before install.
2).Please give bright sunlight charging over 5 hours
before first time use,as the battery is very low from
factory.
3).If there is no good sunlight in 3 months, the battery
may be out of power so you have to charge it by
bright sunlight ,when it’s fully charged, please use
Supplied Key Pin to unlock the device and lighting
system ,otherwise ,it can’t work anymore.
4).If there is no good sunlight or in winter, especially in
North countries, it may take longer time to fully charge
the device and this is very normal for solar products.
5).The matched pole dia.60mm
Package include:
1.
key pin:1pc
2.
Assembling bolt: 4pcs
3. Nut: 4pcs