MATERIAL SAFETY
DATA SHEET
PRO SERIES
Color Tint Pack
F R O M T H E M A K E R S O F T H E A S H F O R D F O R M U L A A N D T H E R E T R O P L A T E S Y S T E M TM
SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Code: CFTINT
Product Name: TINT PACK
Supplier Name and Address:
Curecrete Distribution, Inc.
1203 W. Spring Creek Place
Springville, UT 84663 USA
(801) 489-5663
24-HOUR EMERGENCY PHONE: Chemtrec (800) 424-9300
SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS
CHEMICAL NAME: GREY PIGMENT
CAS NUMBER
Black Pigment
1333-86-4
White Pigment
13463-67-7
Polyether Polyol
9082-00-2
Dispersing Agent
Proprietary
SPECIFIC GRAVITY: 1.52 (H2O = 1)
CHEMICAL NAME: WHITE PIGMENT
CAS NUMBER
White Pigment
13463-67-7
Polyether Polyol
9082-00-2
Dispersing Agent
Proprietary
SPECIFIC GRAVITY: 1.56 (H2O = 1)
CHEMICAL NAME: BLACK PIGMENT
CAS NUMBER
Black Pigment
1333-86-4
Polyether Polyol
9082-00-2
Dispersing Agent
Proprietary
SPECIFIC GRAVITY: 1.09 (H2O = 1)
CHEMICAL NAME: BLUE PIGMENT
CAS NUMBER
Blue Pigment
147-14-8
Polyether Polyol
9082-00-2
Dispersing Agent
Proprietary
SPECIFIC GRAVITY: 1.09 (H2O = 1)
CHEMICAL NAME: RED PIGMENT
CAS NUMBER
Red Pigment
7023-61-2
Polyether Polyol
9082-00-2
Dispersing Agent
Proprietary
SPECIFIC GRAVITY: 1.065 (H2O = 1)
CreteFill Pro Series Tint Pack
Page 1
Material Safety Data Sheet
CHEMICAL NAME: YELLOW PIGMENT
CAS NUMBER
Yellow Pigment
5468-75-7
Polyether Polyol
9082-00-2
Dispersing Agent
Proprietary
SPECIFIC GRAVITY: 1.05 (H2O = 1)
CHEMICAL NAME: BROWN PIGMENT
CAS NUMBER
Red Pigment
7023-61-2
Yellow Pigment
5468-75-7
Black Pigment
1333-86-4
Polyether Polyol
9082-00-2
Dispersing Agent
Proprietary
SPECIFIC GRAVITY: 1.12 (H2O = 1)
CHEMICAL NAME: TAN PIGMENT
CAS NUMBER
White Pigment
13463-67-7
Yellow Pigment
1344-37-2
Brown Pigment
51274-00-1 + 1332-37-2 + 1317-61-9
Polyether Polyol
9082-00-2
DINCH
474919-59-0
Dispersing Agent
Proprietary
SPECIFIC GRAVITY: 1.57 (H2O = 1)
SECTION 3 - HAZARDOUS IDENTIFICATION
HAZARDOUS COMPONENTS
CAS#
TLV (ACGIH)
OSHA PEL
WEIGHT %
No toxic chemicals subject to reporting requirements.
SECTION 4 - FIRST AID MEASURES
EMERGENCY AND FIRST AID PROCEDURES: Flush eyes with water for at least 15 minutes. Get medical attention if irritation develops or persists. Remove
contaminated clothing and wash before reuse. If affected by vapors, remove patient to fresh air; get medical attention if necessary. If swallowed, do not
induce vomiting. Get medical attention.
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: >465° F.
FLAMMABLE LIMITS: N/A
EXTINGUISHING MEDIA: CO2, dry chemicals, foam.
SPECIAL FIREFIGHTING PROCEDURES: Wear positive pressure, self-contained breathing equipment.
UNUSUAL FIRE & EXPLOSION HAZARDS: Empty drums that contain residual material, if burned, may emit toxic or irritating gasses.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS SPILLED: Contain spill and soak spill up with an absorbent material. Place into containers for waste disposal.
WASTE DISPOSAL METHOD: Dispose of waste materials in landfill in accordance with all Federal, State, and Local Regulations.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Wash after handling. Store material indoors in closed containers when not in use. Use with
adequate ventilation. Store at normal ambient temperature. Protect from moisture, heat and sun.
SECTION 7 - HANDLING AND STORAGE
Handle in accordance with good industrial hygiene and safety practices. Wash thoroughly after handling. Keep container closed when not in use. Material
is hydroscopic and may absorb small amounts of atmospheric water. Avoid breathing of vapor or mist.
CreteFill Pro Series Tint Pack
Page 2
Material Safety Data Sheet
SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
RESPIRATORY PROTECTION: Provide effective ventilation to draw vapors or fumes away from workers. In the absence of proper ventilation, use an
approved NIOSH/OHSA organic type respirator.
VENTILATION: All thermoplastic materials will emit fumes and or vapors when heated. Use adequate exhaust to maintain exposure below limits.
PROTECTIVE GLOVES: Use natural rubber or neoprene gloves.
EYE PROTECTION: Eye wash station should be available. Goggles are recommended for all industrial work areas.
PROTECTIVE CLOTHING: Launder contaminated clothing.
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE AND ODOR: Any combination of white, grey, tan, brown, yellow, red, blue or black liquid, mild odor.
SPECIFIC GRAVITY: See notes below #2, COMPOSITION/INFORMATION ON INGREDIENTS
VAPOR DENSITY: N/A
SOLUBILITY IN WATER: Insoluble.
% VOLATIVE BY VOLUME: N/A.
SECTION 10 - STABILITY AND REACTIVITY
STABILITY: Stable.
INCOMPATIBILITY: Strong oxidizing agents and alkalis.
HAZARDOUS DECOMPOSITION: Carbon Monoxide (CO) Carbon Dioxide (CO2).
HAZARDOUS POLYMERIZATION: Will not occur.
SECTION 11 - TOXICOLOGICAL INFORMATION
INHALATION: Exposure to vapor is unlikely. However, vapors or mists produced under certain conditions or use may cause irritation of the nose, throat, and
respiratory tract.
SKIN: May cause mild skin irritation.
EYE CONTACT: May cause slight eye irritation, stinging, tearing and redness.
HEALTH HAZARDS (ACUTE & CHRONIC): None.
CARCINOGENICITY: OSHA __NO__
IARC
NO
SECTION 12 - ECOLOGICAL INFORMATION
NOTE: NOT MEANT TO BE ALL-INCLUSIVE.
POLYETHER TRIOL: FISH 96 HR. LC50: >100MG/L, BASED ON AVAILABLE DATA AND COMPARISON TO SIMILAR COMPOUNDS. DOES NOT BIOACCUMULATE.
SECTION 13 - DISPOSAL CONSIDERATIONS
THIS PRODUCT SHOULD NOT BE RELEASED INTO THE ENVIRONMENT. THE PRODUCT SHOULD NOT BE ALLOWED TO ENTER DRAINS, WATER
COURSES OR SOIL. RECYCLING IS THE PREFERRED METHOD FOR DISPOSING OF THE MATERIAL. OTHERWISE, FOLLOW ALL OF THE APPLICABLE
STATE, FEDERAL, AND LOCAL REGULATIONS IN WASTE CLASSIFICATION, TRANSPORTATION AND DISPOSAL. IT IS THE RESPONSIBILITY OF THE
WASTE GENERATOR TO DO THIS.
SECTION 14 - TRANSPORT CONSIDERATIONS
D.O.T. LABELS REQUIRED (CFR172.101-102): None.
D.O.T. PLACARDS REQUIRED (CFR172.504): None.
CreteFill Pro Series Tint Pack
Page 3
Material Safety Data Sheet
SECTION 15 - REGULATORY INFORMATION
SECTION 302: EXTREMELY HAZARDOUS SUBSTANCES: NONE.
SECTION 311/312: HAZARD CATEGORIES: NONE.
SECTION 313: TOXIC CHEMICALS: NONE.
TOXIC SUBSTANCES CONTROL ACT (TSCA) STATUS
ALL OF THE INGREDIENTS OF THIS MATERIAL HAVE BEEN REPORTED TO THE U.S. EPA, AND ARE INCLUDED IN THE TSCA CHEMICAL INVENTORY.
INTERNATIONAL CHEMICAL INVENTORIES
THE INGREDIENTS OF THIS PRODUCT ARE ALL ON THE FOLLOWING CHEMICAL SUBSTANCES INVENTORIES, ARE EXEMPT FROM THE INVENTORIES, OR ARE
OTHERWISE COMPLIANT WITH INVENTORY REQUIREMENTS OF THE GOVERNING AGENCY:
EINECS (Europe), DSL/NDSL (Canada), AICS (Australia), ECL (Korea), MITI/ENCS (Japan), IECSC (China)
ALL INGREDIENTS OF THIS PRODUCT ARE IN COMPLIANCE WITH EC REGULATIONS 1907/2006 (REACH)
HMIS RATINGS:
HEALTH
1 = SLIGHT
0 = MINIMAL
1
FLAMMABILITY
REACTIVITY
1
0
2 = MODERATE
3 = SERIOUS
4 = SEVERE
SECTION 16 - OTHER INFORMATION
THIS INFORMATION IS FURNISHED WITHOUT WARRANTY, EXPRESSED OR IMPLIED, EXCEPT THAT IT IS ACCURATE TO THE BEST KNOWLEDGE OF CURECRETE
DISTRIBUTION, INC. THE DATA ON THESE SHEETS RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED HEREIN. CURECRETE DISTRIBUTION, INC. ASSUMES
NO LEGAL RESPONSIBILITY FOR USE OR RELIANCE UPON THIS DATA.
CreteFill Pro Series Tint Pack
Page 4
Material Safety Data Sheet