Product
AG-800
Surface
Resistivity
<0.015 /
Silver Conductive Ink
AG-500
0.02 /
Silver Conductive Ink
AG-755
<0.008 /
Applications





Flex circuits
Membrane switches
Additive circuits
EMI/RFI applications
Thermal targets
AG-510
<0.020 /
AG-594
<0.018 /












Screen or pad printable
Fast drying
Highly conductive
Adheres to difficult substrates such
as ITO or other metal oxides





High speed gravure or flexo printing
For extremely thin line printing
Excellent edge definition
Excellent adhesion to most metal
surfaces as well as polyester,
polyimide
& polycarbonate films
Can be thinned
Smooth or coarse surface finish
Screen or pad printable
Adjustable for gravure &
flexographic printing
Blendable for specific resistance
values





Additive circuits
Printed heaters
PTF circuits
Defibrillator pads
EKG/EEG electrodes
Blood glucose sensors
EMI/RFI applications
EL panels
Membrane switches
Flex circuits
RFID & cell phone antennas
EEG/EKG/blood glucose
disposable sensors
Additive circuits
EMI/RFI applications
 Defibrillator pads
 EKG/EEG electrodes
AGCL-675/675C
<0.035 /
Silver/ Silver Chloride Inks
AGCL-823






 Defibrillator pads
 EKG/EEG electrodes





 Membrane switches
 Overprint for silver conductive
traces
 Flex circuits
 Additive circuits



<0.020 /
Silver/Silver Chloride Ink
C-200
Good conductivity
High speed screen or pad printing
Thin for spray or dipping
Can blend with carbon to customize
resistance
 Crease resistant
 Screen printable
 Wets out well and has better
adhesion on ITO substrates
 High conductivity
 Thin for spray or dipping
 Can blend with carbon to customize
resistance
 For fine line printing
 Screen printable
 Highest conductivity
 Higher viscocity, minimal slumping
 Excellent adhesion to metals
 Can be thinned for spray or dipping

Silver Conductive Ink




 Used for EL panel bus bars on
ITO
 Touch screen bus bars
 Difficult substrates
 Flex circuits
 Membrane switches
 EMI/RFI shielding
 Flex circuits
 Membrane switches
 Additive circuits
Silver Conductive Ink
Silver Conductive Ink
Features
50 /
Carbon Resistive Ink



C-774
Carbon Ink
30 /





Membrane switches
Medical sensors
Heaters
Resistance pads
Overprint for silver conductive
traces printed on polycarbonate
substrate





One part epoxy adhesive ink
Crosslinked system
Screen or pad printable
Long working time, quick cure
Used for electrodes with aggressive
gels
Vinyl based thermoplastic
Screen printable
Excellent adhesion to polyester &
polyimide substrates
Not recommended on ITO
Can be blended with AG-800 for
specific resistance values
Can be used as base electrode for
EL panels
Screen printable
For use on polyester, polyimide and
polycarbonate substrates
Excellent adhesion to most metal
surfaces
Fast dry time in low temperature
oven
Rheology can be adjusted
EP-600
<1.0 x 10-3 cm
Two-Part Silver Epoxy
volume resistivity
EP-900
<1.0 x 10-3 cm
Two-part Silver
Stencil Epoxy
volume resistivity
 Component or wire
attachment
 Filling via holes or spaces
 Component attachment &
termination on hybrid circuits,
membrane keypads & other
assemblies
 Component attachment &
termination on hybrid circuits,
membrane keypads & other
assemblies
EP-1100
<5.0 x 10 cm
One-part Silver
Conductive Epoxy
volume resistivity
EP-452
1 X 1013-cm
volume resistivity
 Potting thermocouples,
thermistors and assemblies
 Attaching components or
assemblies to heat sinks
<.06 -cm
volume resistivity
 Gasket sealing for EMI/RFI
shielding
 Flexible conductive
interconnect between
surfaces on touch screens &
EL panels
Two-part Thermally
Conductive Adhesive/Potting
Compound
Sil-Con
Two-part Potting
Compound
-4
Clear Epoxy Staking Adhesive
1 X 1014 -cm
volume resistivity
HTC-300
100 /
EP-837
Hi-Temp Carbon Filled Ink
 Staking or anchoring
components or wires
 Encapsulating components





HTC-350
Hi-Temp Carbon Filled Ink
100 /





PTF circuits
Printed heater circuits
Printed rheostats
Flex circuits
Additive circuits
PTF circuits
Printed Heater Circuits
Printed Rheostats
Flex circuits
Additive circuits




Low temperature curing
Dot Dispensable
Fast cure
Suitable for flexible
substrates
 Two-part electrically
conductive epoxy
 For stencil printing processes
 Low cure temperature
 Excellent bond strength,
temperature resistance and
toughness
 6 month shelf life
 Available in pre-measured
CC-paks, bulk or syringes
 One part epoxy
 30-day shelf life
 Screen or stencil printing
 Two part component epoxy
adhesive
 High thermal conductivity
 Electrically insulating
 High temperature and
solvent resistant
 Very flexible & strong twopart component
 100% solids
 Electrically conductive
 Temperature & solvent
resistant
 Easy removal for component
repair or replacement
 Screen or pad printable
 Low viscosity, 100% solids
 Non-conductive
 Dot dispensable
 Available in clear or green
color
 Low temperature, fast curing
 Used for higher temperatures
 Tough, durable surface finish
 Screen printable
 Crosslinked thermoset for
even more solvent resistance
and higher temperature
stability than HTC-300
 Tough, durable surface finish
 Screen printable, especially
for fine line/fine pitch
 Excellent adhesion to
polyester & polyimide
surfaces
 Can be blended with silver
filled ink for specific
resistance values
 Additional baking time
required
PTC-614
 Printed heater circuits
 Screen or pad printable
 Self regulating ink for heater
applications
1014 /
 Visual reference for X-ray or
NMR
 Fast drying
 Screen, gravure, flexographic
or pad printable
1014 /
 Component encapsulation
 Wire or component staking





 Makers visible under UV light
 Electrically insulating layer
 Fluoresces under UV light to
determine completeness of
coverage
 UV curable, 100% solids
 Touch, durable epoxy
 Adheres to difficult substrates
such as ITO or other metal oxides
 Screen or pad printable
<10K /
Carbon Heater Ink
RO-593
Radio Opaque Ink
UV-3010
UV Encapsulant &
Conformal Coating
UV-772
2.9 x 1013 /
Fluorescing Ink/Coating
UV-1006S
1014 /
Ultraviolet Curable Dielectric
UV-2530
Ultraviolet Curable Matte
Dielectric
UV-2531
Ultraviolet Curable Glossy
Dielectric
UV-2534
1014 /
5.0 x 1015/
5.0 x 1015/
Ultraviolet Curable Glossy
Dielectric
WB-101
Water Based Silver
Conductive Ink
Medical Products (above)
<0.025 /
 Printed insulation layers for
circuits
 Busbar protection on EL & touch
screens
 PTF circuits
 Printed insulation layers for
circuits
 PTF circuits
 Flexible circuit substrates
 Printed insulation layers for
circuits
 Dielectric layer for membrane
switch crossover and tail coat
applications on flexible circuits &
membrane switches
 Dielectric layer for membrane
switch crossover and tail coat
applications on flexible circuits &
membrane switches
 Overprint layer for
carbon/graphite shielding layers




RFID tags
Cell phone antennas
Medical EEG/EKG sensors
EMI/RFI shielding
Screen or pad printable
UV curable, 100% solids
Dot dispensable
Moisture resistant
Suitable for flexible substrates
 Screen or pad printable
 General purpose, matte finish
insulating material
 UV curable, 100% solids
 Available in clear, blue or green
colors
 Glossy finish
 Screen or pad printable
 100% solids
 Available in clear, blue or green
colors
 Low odor
 Glossy finish
 For difficult substrates, such as
printed carbon inks
 100% solids
 Screen printable
 Moisture resistant
 Available in clear, blue or green
colors
 Water based silver filled conductive
ink
 Gravure or rotary printable
 Can be used to spray or coat
 Low viscosity
 High solids
 Excellent for very thin film traces
 Thermoplastic
 Can crosslink for harder surface &
stronger durability
 Excellent adhesion to most
substrates
(s:/website stuff/product chart)
Silver Inks
Product
AG-800
AG-500
AG-510
AG-755
AG-530
AG-594
AG-610
WB-101
Surface
Resistivity
<0.015 /
0.02 /
0.015 /
<0.008 /
0.01 /
<0.018 /
0.050 /
<0.025 /
Applications





Features




Flex circuits
Membrane switches
Additive circuits
EMI/RFI applications
Thermal targets



 Used for EL panel bus bars on
ITO
 Touch screen bus bars
 Difficult substrates
 Flex circuits
 Membrane switches
 EMI/RFI shielding
 Membrane switches
 Additive circuits
 Printed Heaters
 PTF Circuits
 Defibrillator pads
 EKG/EEG Electrodes
 Blood glucose sensors
 EMI/RFI applications
 EL panels
 Flex circuits
 Membrane switches
 Additive circuits

















 Touch Screen Bus Bars
 Used for EL panels in ITO
 Additive circuits
 Flex circuits
 RFID & cell phone antennas
 EEG/EKG/blood glucose
disposable sensors
 Additive circuits
 EMI/RFI applications
 Circuit traces or jumper repair
 High speed dip coating




RFID tags
Cell phone antennas
Medical EEG/EKG sensors
EMI/RFI shielding

















Good conductivity
High speed screen or pad printing
Thin for spray or dipping
Can blend with carbon to customize
resistance
Crease resistant
Screen printable
Wets out well and has better adhesion
on ITO substrates
High conductivity
Thin for spray or dipping
Can blend with carbon to customize
resistance
Polyester binder
Screen or pad printable
Fast drying
High conductivity
Thin for spray or dipping
Can blend with carbon to customize
resistance
For fine line printing
Screen printable
Highest conductivity
Higher viscocity, minimal slumping
Excellent adhesion to metals
Can be thinned for spray or dipping
Extremely flexible
Can blend with carbon to customize
resistance
Excellent adhesion to polyester,
polyimide, ITO, most textiles & porous
substrates
High speed gravure or flexo printing
For extremely thin line printing
Excellent edge definition
Excellent adhesion to most metal
surfaces as well as polyester,
polyimide & polycarbonate films
Can be thinned
Apply by syringe
Fast drying @ room or moderate temp
Thin for spray or dipping
Water based silver filled conductive ink
Gravure or rotary printable
Can be used to spray or coat
Low viscosity
High solids
Excellent for very thin film traces
Thermoplastic
Can crosslink for harder surface &
stronger durability
 Excellent adhesion to most substrates
Carbon Inks
Product
C-200
HTC-300
HTC-350
Surface
Resistivity
50 /
100 /
100 /
Applications
 Membrane switches
 Overprint for silver conductive
traces
 Flex circuits
 Additive circuits





PTF circuits
Printed Heater Circuits
Printed Rheostats
Flex circuits
Additive circuits





PTF circuits
Printed Heater Circuits
Printed Rheostats
Flex circuits
Additive circuits
 Self -regulating printed heater
circuits
PTC-614
C-774
<10 /
30 /





Membrane switches
Medical sensors
Heaters
Resistance pads
Overprint for silver conductive
traces printed on polycarbonate
substrate
Features
 Vinyl based thermoplastic
 Screen printable
 Excellent adhesion to polyester &
polyimide substrates
 Not recommended on ITO
 Can be blended with AG-800 for
specific resistance values
 Can be used as base electrode for EL
panels
 Thermoplastic
 Used for higher temperatures
 Tough, durable surface finish
 Screen printable, especially for fine
line/fine pitch
 Excellent adhesion to polyester &
polyimide surfaces
 Can be blended with silver filled ink for
specific resistance values
 Crosslinked thermoset for even more
solvent resistance and higher
temperature stability than HTC-300
 Tough, durable surface finish
 Screen printable, especially for fine
line/fine pitch
 Excellent adhesion to polyester &
polyimide surfaces
 Can be blended with silver filled ink for
specific resistance values
 Additional baking time required
 Positive Thermal Coefficient Inks are
self-regulating & powered with low DC
voltage
 Operate in temperature range of 60-70
degrees C without feedback loop
 Screen printable
 Print treated polyester or polyimide
substrates
 AG-800 or AG-510 silver ink
recommended for bus bar
 Screen printable
 For use on polyester, polyimide and
polycarbonate substrates
 Excellent adhesion to most metal
surfaces
 Fast dry time in low temperature oven
 Rheology can be adjusted
VRI Potentiometer Inks
Product
VRI
Surface
Resistivity
1 – 100,000 /
Variable
Resistance
Carbon Ink
Applications
Features
 Rigid substrates such as FR-4, FR3, ceramic, CEM-1, CEM-3 and
other inorganic and organic material
used for printed circuit assemblies
 Potentiometers
 Rheostats
 Linear actuators
 Wherever stable electrical
resistance at higher temperatures is
required.
 Variable resistance carbon inks for
blending to achieve specific resistance
values
 Electrically conductive
 Screen printable
 Outstanding abrasion resistance
 Temperature resistant
 Precise and stabile resistance over time
UV Curable Products
Product
UV-2530
Surface
Resistivity
Applications
5.0 x 1015/

UV-2531
UV-2534
5.0 x 10 /
15
5.0 x 1015/
UV-3010
3.8 x1014/
UV-1006S
2.9 x1013/
UV-772
 PTF circuits
 Flexible circuit substrates
 Printed insulation layers for
circuits
 Dielectric layer for membrane
switch crossover and tail coat
applications on flexible circuits &
membrane switches
 PTF circuits
 Flexible circuit substrates
Printed insulation layers for
circuits
 Dielectric layer for membrane
switch crossover and tail coat
applications on flexible circuits &
membrane switches
 Dielectric layer for membrane
switch crossover and tail coat
applications on flexible circuits &
membrane switches
 Overprint layer for
carbon/graphite shielding layers
 Component encapsulation
 Printed circuit board protection
 Printed insulation layers for
circuits
 Touch screens
 El panels
 Flexible printed substrates
 Makers visible under UV light
2.9 x 1013 /
(UV Phosphor binder- Not yet to be added)
Features





Matte finish
Screen or pad printable
100% solids
Available in clear, blue or green colors
Low odor





Glossy finish
Screen or pad printable
100% solids
Available in clear, blue or green colors
Low odor
 Glossy finish
 For difficult substrates, such as printed
carbon inks
 100% solids
 Screen printable
 Moisture resistant
 Available in clear, blue or green colors
 100% solids
 Dot dispensable
 Moisture resistant
 Suitable for flexible substrates
 Can be sprayed or dipped
 100% solids
 Adheres to difficult substrates such as
ITO or other metal oxides
 Screen or pad printable
 Electrically insulating layer
 Fluoresces under UV light to determine
completeness of coverage
Silver/Silver Chloride Inks/Epoxy
Product
AGCL-675
AGCL-675C
Surface
Resistivity
Applications
< 0.035 /
 EKG/EEG Electrodes
 Defibrillator Pads
 Biosensors
< 0.025 /
 EKG/EEG Electrodes
 Defibrillator Pads
 Biosensors
 EKG/EEG Electrodes
 Defibrillator Pads
AGCL-823
< 0.020 /
Features
 Screen printable ink
 Smooth surface finish
 Can be blended for different resistance
values
 Excellent adhesion & crease resistance to
polyester, polyimide & other plastic
substrates
 Screen printable ink
 Coarse surface finish
 Can be blended for different resistance
values
 Excellent adhesion & crease resistance to
polyester, polyimide & other plastic
substrates
 One-part electrically conductive thermoset
epoxy
 Screen printable
 For use with especially aggressive gel
materials
 Excellent mechanical strength & toughness
 High temperature and humidity resistance
Conductive Epoxies
Product
EP-600
EP-900
Volume
Resistivity
Applications
Features
<1.0 x 10-3 cm
 Component or wire
attachment
 Filling via holes or
spacers







<1.0 x 10-3 cm
 Component attachment &
termination on hybrid
circuits, membrane
keypads & other
assemblies






EP-1100
<5.0 x 10-4 cm
 Component attachment &
termination on hybrid
circuits, membrane
keypads & other
assemblies



Two-part electrically conductive epoxy
Dot dispensable
Low cure temperature
Fast curing
Suitable for flexible substrates
6 month shelf life
Available in pre-measured CC-paks, bulk or
syringes
Two-part electrically conductive epoxy
For stencil printing processes
Low cure temperature
Excellent bond strength, temperature
resistance and toughness
6 month shelf life
Available in pre-measured CC-paks, bulk or
syringes
One part epoxy
30-day shelf life
Screen or stencil printing
Radio Opaque Ink
Product
Surface
Resistivity
RO-593
2.9 x 10 /
Applications

13
Visual Reference for X-ray,
MRI & MMR
Features
 Screen, gravure, flexographic or pad
printable
 Fast drying
 Can apply by brush or syringe
 Compatible with Parylene overcoats
Phosphor Binder Systems
Product
PH-745
Surface
Resistivity
5.0 X 1015/
Applications
Features
 Mix with microencapsulated
phosphor powder to produce
pastes for EL panels
 Clear binder to custom mix with
commercially available phosphor
powder as needed
 Excellent flexibility, toughness &
resistance to water & oxygen
 Outstanding adhesion to ITO surfaces
Conductive Coatings
Product
Surface
Resistivity
Applications
Antistat-268
<10,000/
 Coating for paper,
cardboard, wood and most
plastic substrates
 Saturant for urethane foam
C-808
<50/
 Coating for paper,
cardboard, wood and most
plastic substrates
 Saturant for urethane foam
WB-101
<.025/




RFID
Cell phone antennas
Medical EEG& EKG
EMI/RFI shielding
Features
 Water based antistatic coating or
saturant
 Can be dipped, roll coated or sprayed
 Can be crosslinked for increased
hardness & durability
 More conductive version of Antistat-268





Gravure or high speed processes
Suitable for spray or coating
Low viscosity, high solids silver ink
Electrically conductive
Can be cross linked
Potting Compounds
Product
Volume
Resistivity
<.06 -cm
Sil-Con
EP-837
1 X 1014-cm
EP-452
1 X 1013-cm
EP-799
1.0 X 1014-cm
Applications
Features
 Gasket sealing for EMI/RFI
shielding
 Flexible conductive
interconnect between
surfaces on touch screens
& EL panels
 Very flexible & strong two-part
component
 100% solids
 Electrically conductive
 Temperature & solvent resistant
 Easy removal for component repair or
replacement
 Low viscosity, 100% solids
 Non-conductive
 Dot dispensable
 Available in clear or green color
 Low temperature, fast curing
 Two part component epoxy adhesive
 High thermal conductivity
 Electrically insulating
 High temperature and solvent resistant
 Excellent moisture resistance
 Excellent toughness and flexibility
 Fast curing
 Excellent mechanical properties and heat
resistance
 Staking or anchoring
components or wires
 Encapsulating components
 Potting thermocouples,
thermistors and assemblies
 Attaching components or
assemblies to heat sinks
 Potting components or
assemblies
 Protection against moisture
 Protection against thermal
or mechanical shock
Dielectric Inks
Product
BT-101
Volume
Resistivity
>1 X 1014-cm
Applications
 Capacitance layer between
phosphor and back
electrodes for EL lamps on
polyester or ITO substrates
Features







High dielectric constant
Barium titanate based dielectric ink
Electrically insulating
Screen printable
Very moisture resistant
Can be crosslinked
Produces mirror smooth surface finish
Specialty Inks
Specialty 7(no data sheets, but one platinum pattern photo with generic description) COPY- emailed to
Gary 2/10/10 see below
Specialty Inks & Coatings
New applications sometimes require something other than standard off-the-shelf materials. New and
emerging technologies, harsh environmental conditions, mechanical and thermal stress, compatibility
between materials and substrates, extreme temperature cycling and unique manufacturing processes
and conditions are all circumstances that may require specialty materials. Conductive Compounds,
Inc. formulates customized inks and coatings utilizing a wide variety of polymer binders and metal
components such as gold, platinum, rhodium, nickel and tungsten. We take great pride in providing our
customers with products that are tailored to their unique requirements