Technical data sheet
EN-35 C/D
ENDURA
DUE
Single lever cartridge
Standard 35mm
08EN35L3001
Technical specifications
Flow
Nut torque/Pitch M1,5
10 - 12 N.m
Opening angle
25º
Rotation angle
90º
Working pressure (recommended)
1 – 5 bar
Burst pressure
>50 bar
Life cycle
175,000 cycles
1,000,000 cycles
140,000 cycles
EN-817 NF U3
(x2) ASME 112.18.1 M
(x2) GB18145
Sensitivity (r=45 mm.)
11 º angle
Fidelity
<5 ºC
Constant 63ºC & 50°C
(6 l/min-3 l/min)
< 4°C – < 6ºC
Max. Hot water
90 ºC
Max. Hot water recommended
60 ºC – 65 ºC
Sensitivity
Flow rate at 3 bar
Free flow
27,70 l/min
C-Restrictor
20,80 l/min
Noise level (C-Restrictor)
22 +/- 2dB(A)
(1)
Saving Device (DUE) according to NF EN 817
Operation torque (3 bar)
Open – close
0,20÷0,35 Nm
Turn left-right
0,20÷0,35 Nm
(1)
Measured with Sedal’s faucet
www.sedal.com
TDS08EN35L3001 VER: 5 LANG: EN DATE: 2017-01-17
Technical data sheet
Single lever cartridge standard 35mm
EN-35 C/D
ENDURA
DUE
Technical dimensions
Machining tips
(2)
Dimensions of the cartridge assembled into the faucet (without vertical gap between the cover and the base)
www.sedal.com
TDS08EN35L3001 VER: 5 LANG: EN DATE: 2017-01-17
Single lever cartridge standard 35mm
EN-35 C/D
ENDURA
DUE
Main characteristics of DUE
This cartridge have been created with “water saving“ (due) system.
Due system :
•
•
•
“Water saving” system is a flow adjustment
device that allows you control outlet flow from
60% to 80% of the total flow.
Full flow can be reached saving a “hard point”,
exerting a force between 0,50-0,70 Nm.
"Water saving" (Due) system is always enabled.
www.sedal.com
TDS08EN35L3001 VER: 5 LANG: EN DATE: 2017-01-17