ApS
Wind Power Solutions
Wind Power Solutions
news
We represent our
customers in every way
When you choose our product Client Rep. and quality inspection,
we will be your eyes and ears all the way.
C
• onshore
• offshore
• wind farms
• environment
able and turbine installation and
diving operations are one our main
specialities in Clients rep. We will be on
shore and off shore, with all our knowhow representing you in every possible
way, to ensure 24 hour fully inspection.
Our quality inspections will follow the
procedures from the factory to the
installation to ensure you quality in the
whole process.
After the first meeting with you, we
make a solution designed especially for
you, to ensure that all your demands will
be full filled.
Our aim is customer satisfaction and
therefore we keep an open dialogue all
the way.
Customer benefits
When we representative you, then you
will get:
24 hours off focus on deviations and
errors causes by the contractors gives
you no waste of time. The result is lower
cost.
Security that all work and safety procedures are followed and optimized.
The daily report (dpr) ensures that you
know exactly, what has been happening
during the last 24 hours.
Our inspection and hand over procedures ensures, that you get as promised
in contracts and agreements.
Our control of route planning and correct positioning of the vessels ensures
no damaging on cables, monopoles and
foundations.
We will participate in all toolbox talks
and daily meetings with the contractors.
We agree with the contractors about
bad weather days and we are responsible
for documentation of such conditions.
PMT NEWS
ApS
Wind Power Solutions
Wind Power Solutions
The main operations in
Client Rep.
Cable and turbine installation and
diving operations are our specialities in Client Rep., but also on land
we will be your eyes and ears.
Below we present you the
main areas in which we support you:
•
•
•
•
•
Production on land
Foundation
Cable Facilities
Diving
Installation
Daily procedures:
• Follow the installation works, which comprise
lifting activities and installa-
tion of foundations/mono-
pole/transmission piece.
• Follow when the installation vessel/barge is positioning itself, and is jacking up/down.
• Keep special focus on devia-
•
•
•
•
•
tions and errors caused by the Contractors during the above activities.
Agree with contractors about bad weather days and responsible for documenta-
tion of bad weather.
Coordinate the contractors
(installation vessel/barge) and (transportation team), for example make “minor decisions”, approve jacking up across a cable etc.
Participate in daily meetings with the Contractors, and write and distribute minutes from the daily meetings.
Prepare and send the Daily Progress Report (DPR).
Participate in Toolbox meet-
ings before starting the end up and piling/ lifting the foundation from bargetransporting the foundation placing the foundation.
Specially daily procedures for
Turbine installation:
• Issue and sign the Handing over Certificate Client/
owner – Installation vessel/
company when turbine parts have been lifted onto the Installation Vessel.
• Record which components (serial number) that are installed on a specific foundation, i.e. which
bottom tower, top tower, nacelle and rotor that will form a WTG, and the num-
ber of this.
• Sign the Handing over Certificate Installation
vessel/company – Client/
owner when turbine parts have been lifted onto a foundation.
• Report all this to the WTG Project Manager.
Working periods:
Installation of the cable goes
on 24 hours/day, 7 days per
week. Installation team and
installation vessel have staff,
working in four shifts, which
are living on the vessel.
The representatives will work
shift, approx 2 week each.
During the shift he/she lives
and works on board the Installation Vessel together with the
contractor´s staff.
Please call us for more
detailed information and to
give you a clear view of the
benefits you will get using us
as your eyes and ears whether
it is on land or off shore.
References:
Rødsand 2 Denmark
ApS
Wind Power Solutions
Ørebjergvej 8 - DK-4262 Sandved - Denmark
Phone: +45 58 38 52 02 - Mobile +45 40 15 03 56
Mail: [email protected] - www.pmt.nu