How To Clean Sewer Pipe
Phone: 914-573-4589
Email: [email protected]
• Cleaning a sewer pipe may be difficult. It is advisable to
hire a sewer cleaning contractor for the best outcome.
How To Clean Sewer Pipe
Locate a Cleanout Opening
• It is advisable to use a main drain cleanout when cleaning a
sewer pipe.
• Main drain cleanout’s can be located on horizontal or vertical
sewer pipes.
• They can be identified by a metal or plastic cap with a square
fitting on the top.
Prepare Cleaning Equipment
• Prepare your cleaning equipment properly with safety in mind.
• If you are using electric equipment, plug it into a ground fault
circuit interrupter (GFCI) to prevent electric shock.
• If you are using a gas-powered pressure washer, attach a highpressure extension hose between the pressure washer and
spray wand.
• If you’re using a sewer jetter attachment, connect the jetter
coupling to the power washer trigger gun.
Clean with a Sewer Jetter
• Insert the tip of the drain cleaner into the sewer opening.
• Make sure that the tip points in the direction of the clog.
• Feed in the sewer jetter hose as you squeeze the spray wand
trigger.
• For effective cleaning, for every few feet, pull the hose back
about and then continue moving forward.
Clean Up
• After your cleaning job is completed, clean the sewer jetter
with the gentle nozzle of your pressure washer.
• If you find any damaged hose or fittings after your job,
consider replacing them.
• Keep the coiled sewer jetter in your garage away form sunlight
and children.
Sewer Cleaning Services in Yonkers, NY
• Central Sewer is a 24 hour full service sewer contractor with
service vehicles equipped with the latest technologies in the
sewer industry.
• With more than 35 years of experience, our trained
professionals are here to service your sewer needs.
• If you need any emergency sewer services, contact us.
Central Sewer
Sewer and Drain Cleaning Services
1767 Central Park Ave., Suite 231
Yonkers, NY 10710
Phone: 914-573-4589
Email: [email protected]
http://www.centralsewerny.com/