TSLOT Series
LINEAR LIGHT
Extrusion Light
The TSLOT Series of lights are an 80/20 extrusion adaptive LED light illuminator with an intense and uniform light
pattern that offer considerable energy savings over fluorescent lighting options. Mounting is easy in that the TSLOT unit
slides into the 80/20 brand extrusion with no need for extra mounting accessories. With the ability to direct-connect up
to 6 modules lengths of 300mm to 1800mm are achievable in 300mm increments.

Fits 80/20 extrusion only

Easy install with male and female connector

Direct-connect up to 6 units together

Space saving design

Comes with TSLOT light unit and male connector
* Extrusion not included
Electrical Input
24 VDC +/- 5%
Current
Max. 500mA
Wattage
Max. 12W
Connect
6 Max.
Connection
Phoenix Contact 2.5mm pitch, 2 position block plug - P/N1778832
Ambient Temp.
-20º - 50º C (-4º - 122º F)
IP Rating
IP50
Compliances
CE and RoHS
Weight
~34g
IEC 62471 Rating
See page 2
TSLOT300-WHI
Product Family:
Linear Light
TSLOT
Revision: 2014 R3
Size:
300mm
Color:
WHITE
─» Part Number Key
CE and RoHS Compliant
Smart Vision Lights • 2359 Holton Rd. • Muskegon, MI 49445 •Phone 231.722.1199
www.smartvisionlights.com
product warnings
!
Attention
Please note that the power requirements for this unit are 500mA. Failure to provide 500mA may result in
unrepeatable lighting and premature LED and circuit board degradation.
distance chart
Working Distance
Mm (inches)
Pattern (80%-100% measured intensity)
mm (inches)
.5m (~19.7”)
550mm (~21.7”) H x 560mm (~22”) W
1m (~39.4”)
760mm (~30”) H x 760 (~30”) W
1.5m (~59.1”)
971mm (~38.2”) H x 971mm (~38.2”) W
Typical Output Performance
LUX
Lumens
Distance = 0.5 meter
1,168
1,360
Illumination measurement taken with white LEDs – 5000K
M12-TSLOT300-ADP
TSLOT300-ENDSTOP
5PM12-22P
TSLOT300-22-CR
Extrusion mounted M12
Power Connector
Extrusion mounted end
stop for TSLOT light
TSLOT M12 Pigtail Connector
2-Pin Jumper Cable
for TSLOT Lights
compatibility list
TSLOT300 is compatible with the following models of 80/20 brand aluminum extrusion.
Fractional T-Slotted
1501, 1501-LS, 1502, 102-LS,1503, 1503-LS, 1504,1504-LS, 1515-Lite, 1515-LS,1515UL,
1515-ULS,1515-L-Black, 1547,1517, 1517-LS, 1534-Lite, 3034-Lite,1530-L-Black, 3030-Lite, 3030-LS
Metric Profiles
40-4001, 40-4002, 40-4003, 40-4004, 40-4040-Lite, 40-4040-UL, 40-4030-Lite, 40-4093, 4094,
40-4096, 40-408—Lite, 40-4080-UL,40-4082-Lite, 40-4083-Lite, 40-4084-Lite, 40-4085-Lite,
45-4545-Lite, 45-90
risk group
According to IEC 62471:2006. Full documentation upon request.
Notice
Exempt Group: No photobiological hazard to eyes or skin even for continuous, unrestricted use.
Applicable for wavelengths: WHI
Revision: 2014 R3
Smart Vision Lights • 2359 Holton Rd. • Muskegon, MI 49445 •Phone 231.722.1199
www.smartvisionlights.com