EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
1.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
PREFACE
Orders are accepted in accordance with ArcelorMittal South Africa's General Conditions of Sale
and prices VAT exclusive.
All prices and transport tariffs (road or rail) are subject to a settlement discount of 2,5%, provided
payment is made in accordance with ArcelorMittal South Africa’s General Conditions of Sale.
All items are subject to “overage” and “underage”. Refer paragraph 3.2 (page 2).
Material addressed by this price list is sold at a price per metric ton (1000kg) on gross mass as
recorded on the assized mass meter or weighbridge at the works.
Unless otherwise stated, extras or deductions quoted in this price list are per metric ton and each
extra or deduction is separate and explicit.
Normal testing and inspection as outlined in the specifications are carried out. When additional
inspection, testing or processing is required, extras will be charged.
Prices and extras or deductions and transport tariffs are those ruling on date of confirmed delivery
and are subject to change without prior notice.
When placing orders, customers must always specify the end use and ensure that this is
compatible with the ordered quality or specification. ArcelorMittal South Africa will then endeavour
to deliver the material “fit for purpose”. However, if the end use is in general terms such as “stock”,
or “general engineering”, the product quality control will be in terms of the quality or specification
only.
After orders have been accepted and confirmed, they cannot be cancelled in whole or in part or
altered in any manner whatsoever, except by special agreement with ArcelorMittal South Africa in
writing. Should an order be modified, the order as amended, it will be re-priced.
The publication of this price list does not place ArcelorMittal South Africa under any obligation to
supply the quoted qualities and sizes at all times. Availability remains subject to confirmation and
the stipulations in both the price list and relevant data sheets.
Before processing material, customers must ensure that it meets their requirements. Noncompliance in this regard may invalidate a claim. ArcelorMittal South Africa does not prescribe
any particular checking or testing methods. Visual checks, simple dimensional checks and
reference to test certificates and/or orders should be performed beforehand.
2.
2.1
PRICE INFORMATION (Definitions)
ITEM
An item is a product of a single technical specification (i.e. a single quality, width, thickness, coil
size and packaging, surface finish or condition, and any additional processing parameters
required or requested.)
2.2
ITEM EXTRAS
Item extras apply to the total number of full slab coils ordered per item for delivery in a given
calendar month. Only identical items (full item description) will be combined for item extra
determination (Best Tonnage Ordered “BTO’d)
3.
3.1
GENERAL INFORMATION
MINIMUM ORDER QUANTITY
The minimum quantity per item ordered shall be in accordance with the following:
Standard items
Other items
One Full slab coil*
Two full slab coils
Refer to Annexure 2 (page18 – 19) for applicable full slab coil mass according to width and
Annexure 1 (page 13 – 17) for Standard items
* All API and all High Strength specifications (exceeding 300MPA yield strength) = 2 Full slab coils
(page 9)
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page
1
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
3.2
OVERAGE/UNDERAGE
Please also refer to Annexure 3 (page 20) for tables.
The principle of delivering the proceeds of full slab coils is applicable in all cases.
3.2.1
OVERAGE:
a) Ordered mass plus 10%, applicable for cases where less than 10 full slab-coils is ordered per
item. This will be adjusted if a customer elects to have the underage adjusted as described in
3.2.2 c (for standard items and other items)
b) Ordered mass plus one full slab coil, for cases where 10 or more full slab-coils per standard
item are ordered. For non-standard items an Overage of +10% will be allowed.
3.2.2
UNDERAGE:
Standard items:
a) For cases where only one full slab-coil is ordered, the Underage allowed is ordered mass
minus 25%.
b) For cases where more than one full slab-coil is ordered, the Underage allowed is ordered
mass minus one maximum full slab-coil (nominal mass plus 10%).
c) However, in the case of standard items 2 to 4 slab-coil orders, customers may elect to have
the Underage adjusted to 50% of a full-slab-coil below the ordered mass. In such a case the
Overage will be adjusted to 60% of a full-slab-coil above the ordered mass. In this case the
item extra for the whole order will be based on the increased order quantity, should the
delivered mass exceed the originally ordered mass by more than a ½-slab coil.
Other items, not listed as standard items:
a) The Underage allowed is ordered mass minus one maximum full slab-coil (nominal coil mass
plus 10%) when less than 10 full slab coils are ordered.
b) If 10 or more full slab coils are ordered, the Underage allowed will be minus 10%.
c) However, in the case of other available (non-standard) items 2 to 4 slab-coil orders,
customers may elect to have the Underage adjusted to 60% of a full-slab-coil below the
ordered mass. In such a case the Overage will be adjusted to 110% of a full-slab-coil above
the ordered mass. In this case the item extra for the whole order will be based on the
increased order quantity, should the delivered mass exceed the originally ordered mass by
more than a ½-slab coil.
d) In cases where the underage applied results in less coils delivered than the original order, no
penalty due to the reduced order quantity will be applied.
e) A replacement order for the proceeds of two slab-coils may be placed at an item extra equal
to the original order, should the underage applied result in less material delivered than
originally ordered.
3.3
3.3.1
MASS OF COILS
Mass of individual coils:
Orders for coils with a specified exact mass will not be accepted. Coils may be ordered to the
nominal full coil mass as per ruling mass tables, or smaller split coils (half size).
Customers must indicate the maximum coil mass that can be handled to ensure the correct
selection of available options.
3.3.1.1 Full mass coils:
Defined as coils with a mass of at least 75% and a maximum of 110% of the specified nominal
mass as per ruling coil mass tables.
3.3.1.2 Light mass coils:
Defined as coils with a mass less than full mass coils, but at least 70% of the nominal mass per
ruling coil mass tables.
3.3.2 Mass of all coils for the ordered item:
Despatch will take place as follows:
a)
At least 90% of the ordered mass in full mass coils
b)
Not more than 10% of the ordered mass in light mass coils
3.4
MILL EDGE COILS
Un-cropped ends will be limited to a minimum.
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page
2
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
3.5
MILL RUN COILS
Mill run coils are supplied untrimmed and un-cropped from the Hot Strip Mill. Refer to claims
Allowance Policy.
3.6
MARKING
The quality, width and thickness are marked on every coil. When a test and/or analysis certificate
is required, the cast number will be shown on the coil.
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page
3
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
4.
QUALITY EXTRAS
Specification
Available
Thickness
R/t
Range a)
Slab
Code
(VAT excl)
Widths
(mm)
Note: a) Thickness range available is dependant on type of steel and width-thickness ratio (refer to
Data Sheet) only the minimum thickness available in the narrowest available slab and the
maximum thickness is shown in the price list.
4.1
LOW CARBON QUALITIES
SAE 1006
SAE 1008
SAE 1010
SAE 1010 (Si 0,03%)
SAE 1018
COMMERCIAL QUALITY
4.2
960; 1000; 1100;
1200; 1300; 1400;
1500; 1600; 1870
960; 1000; 1100;
1200; 1300; 1400;
1500; 1600; 1870
960; 1000; 1100;
1200; 1300; 1400;
1500; 1600
960; 1000; 1100;
1200; 1300; 1400;
1500; 1600
1100; 1200; 1300;
1400; 1500; 1600; 1870
960; 1000; 1100;
1200; 1300; 1400;
1500; 1600; 1870; 1950
395 000
1,5 – 13
35
098 000
1,5 – 13
25
099 000
1,6 – 13
95
099 003
1,6 – 13
110
421 000
1,6 – 13
360
123 011
1,5 – 13
0
STRUCTURAL GRADES
EN 10025 – 2 - S235 JR +AR
1000; 1100; 1200; 1300;
1400; 1500; 1600; 1870
985 000
1,6 – 13
75
EN10025 – 2 - S235 JR + AR
(Si .03%)
960; 1000; 1100; 1200;
1300; 1400; 1500; 1600;
1870
985 001
1,6 – 13
110
EN 10025 – 2 - S275 JR +AR
1100; 1200; 1300; 1400;
1500; 1600; 1700; 1870
900; 960; 1000; 1100;
1200; 1300; 1400; 1500;
1600; 1700; 1870
1000; 1100; 1300; 1400;
1600; 1870; 1950
989 000
1,6 – 13
235
989 001
1,6 – 13
250
820 000
1,5 – 12
395
EN10025 – 2 - S275 JR + AR
(Si .03%)
EN 10025 – 2 - S355 JR +AR
Note a
1100; 1300; 1400; 1600;
868 000
6,0 – 12
450
1870
1100; 1300; 1400; 1600;
EN 10025-2- S355 J2+AR
868 018
6,0 – 12
560
1870
Note: a) Less than 2,0mm available ex Saldanha only, dimensions 1,5 & 1,6 & 1,9 x 1220mm only.
(All other dimensions on enquiry only)
EN 10025 – 2 - S355 J0 + AR
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page
4
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
4.
4.3
QUALITY EXTRAS (continued)
TUBE & LINE PIPE STEEL
SAE 1008 (Si 0,03%)
SAE 1008 (Si Killed)
SAE 1008 (LOW S)
SAE 1010 (LOW S)
EN 10219 – 1 - S275 J0H
(S275 Tube)
960; 1000; 1100;
1200; 1300; 1400;
1500; 1600; 1820
1300; 1500; 1600
1300; 1400
1300; 1400
960; 1200; 1300; 1400;
1500; 1600
098 007
1,5 – 13
40
098 039
098 013
099 001
1,7 – 13
1,7 – 6,0
1,6 – 6,0
80
90
245
561 000
1,6 – 6,0
350
EN 10219 – 1 – S355 MH
(S355 Tube)
1100; 1200; 1300; 1400;
558 000
2,0 – 6,5
1500; 1600
1100; 1200; 1320; 1440;
API 5L L245 / Gr B PSL1
1500; 1550; 1600; 1650;
002 001
2,0 – 14
1700; 1760; 1820
960; 1050; 1200; 1320;
1440; 1500; 1550; 1600;
API 5L L290 / X42 PSL1
003 005
2,0 – 14
1650; 1700; 1760; 1820;
1950
1100; 1200; 1320; 1440;
API 5L L290 / X42 PSL2
1500; 1550; 1600; 1650;
003 002
6,0 – 12
1700; 1760; 1820
1100; 1200; 1300; 1440;
API 5L L360 / X52 PSL1 *
342 009
6,0 – 14
1600; 1750; 1820
API 5L L360M / X52 PSL2 *
Enquiry only
342 007
6,0 – 14
API 5L L415 / X60 PSL1 *
Enquiry only
760 000
6,0 – 13
API 5L L415M / X60 PSL2 *
Enquiry only
760 001
6,0 – 13
API 5L L450 / X65 PSL1 *
Enquiry only
835 000
9,0 – 13
API 5L L450M / X65 PSL2 *
1600
835 011
10 – 13
960; 1100; 1440; 1600
API 5CT J55
645 000
6,0 – 10
Note: * Availability subject to enquiry. Quality Extra is valid for standard API 5L only, and will be
adjusted per contract or technical requirements.
4.4
495
235
350
410
590
705
1035
1210
1095
1445
915
DRAWING AND FORMING GRADES
EN 10111 DD 11
EN 10111 DD 12
EN 10111 DD 13
EN 10111 DD 14
2017-04-01
960; 1000; 1100; 1200;
1300; 1400; 1500; 1600
960; 1000; 1100; 1200;
1300; 1400; 1500; 1600
960; 1000; 1100; 1200;
1300; 1400; 1500; 1600
960; 1000; 1100; 1200;
1300; 1400; 1500; 1600
Cancels and supersedes issue dated
933 000
2,0 – 8,0
45
931 000
2,0 – 8,0
125
932 000
2,0 – 8,0
175
934 000
2,0 – 8,0
295
2017-03-01
Page
5
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
4.
4.5
QUALITY EXTRAS (continued)
STRUCTURAL STEEL WITH IMPROVED FORMABILITY
SUPRAFORM HR 190
960; 1000; 1100; 1200;
1300; 1400; 1500; 1600
585 000
2,0 – 10
400
SUPRAFORM HR 250
960; 1000; 1100; 1200;
1300; 1400; 1500; 1600
577 000
2,0 – 10
340
SUPRAFORM HR 290
(S0,010%)
1100; 1200; 1300;
1400; 1500; 1600;
1870
582 005
2,0 – 6,0
515
4.5.1
NEW STRUCTURAL STEEL WITH IMPROVED FORMABILITY
SUPRAFORM S 315 MC/ EN
10149 – 2 - S315 MC
1100; 1300; 1400; 1600
SUPRAFORM S 355MC/ EN
10149 – 2 - S355 MC
960: 1000; 1300; 1600;
1700; 1870
SUPRAFORM S 420 MC/ EN
10149 – 2 - S420 MC
960; 1000; 1300; 1400;
1600
556 000
2,0 – 10
530
557 000
2,0 – 12
590
559 001
2,3 – 8,0
820
1300; 1600
SUPRAFORM S 550 MC/ EN
530 000
2,5 – 8,0
10149 – 2 - 550 MC
Note: Minimum order quantity for all Supraform MC ranges will be 2 Full slab coils
4.6
SPECIAL APPLICATIONS
SANS 1350
4.7
1230
1500
705 000
2,2 – 6,0
435
107 000
2,0 – 6,0
705
HIGH CARBON AND / OR ALLOYED STEELS
WEARPLATE 200*
960; 1300
22MnB5 AMSA HR*
960; 1300; 1400
982 000
2,0 – 7,0
1295
Note: * Availability of High Carbon or Alloyed steel is restricted to Mill Edge only and the following
Dimensions:
Wearplate 200:
960mm slab width range (2,0 - 6,0mm) and 1300mm slab (2,5 - 6,0mm)
22MnB5 AMSA HR: 960mm slab width range (2,0 - 6,0mm) and 1300mm slab (3,7 - 6,0mm) and 1400mm
slab (3,7 - 6,0mm)
4.8
“VASTRAP” (Chequered Pattern Floor plate)
COMMERCIAL QUALITY
960; 1100; 1300
123 008
(Vastrap)
Note: Available as mill edge only, available sizes in paragraph 6.2
2017-04-01
Cancels and supersedes issue dated
2017-03-01
3,0 – 8,0
0
Page
6
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
4.
4.9
QUALITY EXTRAS (continued)
PRESSURE VESSEL GRADES
EN10028-2 P265 GH +AR
1100; 1200; 1300;
1400; 1500; 1600;
1700; 1870
136 002
EN 10028-2 P355 GH+AR
1300
150 000
1100; 1200; 1300;
1400; 1500; 1600;
112 000
1700; 1870
Note: Confirm elevated temperature testing on enquiry for GH specification.
1295
1000
395 007
1,5 - 13
50
395 003
2,0 – 6,0
155
098 003
2,2 – 6,0
180
RE-ROLLING GRADES
SAE 1006 (Si 0,03%)
SAE 1006 (Boron alloyed)
SAE 1008 (High elongation)
5.
3,5 – <10
760
3,2 – <10
EN10028-5 P355M
4.10
2,0 – <10
960; 1000; 1100; 1200;
1300; 1400; 1500;
960; 1000; 1100; 1200;
1300; 1400; 1500
960; 1000; 1100; 1200;
1300; 1400; 1500
ITEM EXTRA TABLE
Standard items 2)
Extra (R/t)
R/t (VAT exclusive)
1
447
2
350
3
263
4
175
5
87
6-9
0
≥ 10
-87
Complexity cost – Other items subject to extra of R219 per ton in addition to the above item extra.
Minimum order quantity on all non-standard items, all API and all High Strength specifications
(exceeding 300 MPA yield strength) = 2 Full slab coils
Notes:
1)
Please refer to Annexure 2 (page 18 - 19) for applicable full slab coil mass according to width.
2)
All Standard Items. For listing please refer to Annexure 1 (page 13 - 17)
3)
All other items not listed in Annexure 1
4)
Should an order be accepted for an item currently not listed as Standard item (i.e. Non-std),
but it conforms to the following criteria:
a. > 500 ton;
b. > 2,5mm thick;
c. > 1000mm wide;
d. Width to Thickness Ratio < 500;
e. And utilisation of a Standard slab,
the order will be priced as standard item (-R87 item extra).
(Conformance to criteria to be confirmed on enquiry, Manual Price Adjustment will be
necessary)
f. Order completion stipulations (overage/underage) for these items will remain nonstandard, only prices are adjusted.
g. The full non-standard order must be placed as a single confirmed order, in a single
delivery date bucket, at least > 500t < 1000t.
Item 1)
(Number of full slab coils)
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page
7
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
6.
6.1
WIDTH-THICKNESS EXTRA
Thickness
(Available increments
– 0,1mm)
1,5 (note 1a & b)
Width (Mill Edge)
(Available increments 5mm)
800 – 980mm
Not Available
R/t (VAT exclusive)
985 – 1180mm
1185 – 1590mm
760
640
1595 – 1925mm
1,6
810
705
585
1,8
690
585
460
1,9
630
525
405
2,0
575
470
345
2,2
545
440
320
395
2,3
535
430
310
385
2,4
530
425
305
380
2,5
525
420
300
375
2,8
515
410
290
360
2,9
510
405
285
360
3,0
505
400
280
350
3,2
500
395
275
345
3,5
495
390
270
340
3,8
490
385
265
335
4,0
485
380
255
330
4,5
470
360
240
315
5,0
470
360
240
315
6,0
470
360
240
315
8,0
500
395
275
345
10,0
530
425
305
380
12,0
570
460
340
415
14,0
605
500
380
450
Not Available
Notes:
1)
2)
3)
a) 1,5mm is available in widths 1000 & 1050 mm only ex-Vanderbijlpark Steel, and only in
Commercial Quality, SAE1006 and SAE1008 (including Si 0,03% Modifications).
b) 1,5mm in width 1219mm is available ex-Saldanha Steel only, only Full slab coils, minimum
order quantity 2 Full slab coils, and only in Commercial Quality, SAE1006 and SAE1008
(including Si 0,035% Modifications).
For thickness not tabulated, but within the range 1,5 to 14,0mm, the larger extra above or
below that thickness extra will apply.
Availability of product widths and thickness is subject to slab width availability and widththickness ratios per type of steel (please refer to paragraph 4, page 4 – 7 and Data sheet).
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page
8
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
6.
6.2
WIDTH-THICKNESS EXTRA (continued)
VASTRAP (Chequered Pattern Floor Plate in Coil)
Widths
1200mm
R/t (VAT exclusive)
3,0
280
4,5
240
6,0
240
8,0
275
Note: Available sizes and Mill Edge only. Standard items listed in Annexure 1.
Thickness
(mm)
7.
LENGTH TABLE
Cut lengths are not available
8.
PROCESSING EXTRAS
R/T (VAT exclusive)
8.1
TEMPER ROLLING (6 mm maximum)
8.2
RESTRICTED THICKNESS TOLERANCE
For closer tolerance, but not less than: 75% of specification on price list
135
8.3
SIDE TRIM EXTRA (Max thickness = 10mm depending on quality)
236
8.4
CUT BACK TO THICKNESS
8.5
MARKING
According to SANS 0202
8.6
8.7
8.8
8.9
8.10
(2073)
100
87
(1361)
26
IMPACT TESTS (LONGITUDINAL/TRANSVERSE) at Room Temperature to -30°C
One set of 3 tests per cast
One set of 3 tests per 40 Ton
One set of three tests per full slab coil
Temperature lower than -30°C (additional to above extras)
17
39
78
57
TEST PIECE CONDITION
Normalised (Compulsory for LPG 275)
35
WITNESSING OF MECHANICAL TESTS AND SURFACE INSPECTION
Witnessing mechanical test
(0345)
Surface inspection
(0577)
Surface inspection and marking out of test pieces
(6029)
Inspect: packaging
(0466)
Inspect: packaging, weight & dimensions
(0484)
61
39
122
30
35
VASTRAP CHEQUERED FLOOR PLATE IN COIL
Patterned non-slip surface available in Commercial Quality
925
(code 123 008)
ELEVATED TEMPERATURE TESTS
One test per temperature per cast
2017-04-01
Cancels and supersedes issue dated
(0458)
2017-03-01
60
Page
9
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
9.
9.1
PACKAGING EXTRAS
NORMAL SHEET IN COILS
Coil size
1/3 Slab Coil
½ Slab Coil
Full slab Coil
Refer to Packaging Specification for code description.
9.2
Packaging Code 91
Non Protective
R/t (VAT exclusive)
On enquiry only
171
0
VASTRAP (Chequered Pattern Floor Plate in coil)
Coil size
1/3 Slab Coil
½ Slab Coil(3,0mm & 4,5mm)
Full Slab Coil (6,0mm & 8,0mm)
Note: Full slab coils max OD 2,1m; 21 ton
2017-04-01
Cancels and supersedes issue dated
Packaging Code 91
Non Protective
R/t (VAT exclusive)
Not Available
0
0
2017-03-01
Page 10
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
STANDARD ITEMS
Thickness
(mm)
Product
Width (mm)
ANNEXURE 1
Applicable
Slab Width
LOW CARBON QUALITIES
1.
COMMERCIAL QUALITY (Code 123 011)
1000 (a)
1,5
1100 slab
1219 (b)
1,5
1300 slab
1,6
1219
1300 slab
1,6
1225
1300 slab
1,8
1225
1300 slab
1,85
1219
1300 slab
1,9
1219
1300 slab
1,9
1225
1300 slab
2,0
1000
1100 slab
2,0
1225
1300 slab
2,4
1225
1300 slab
2,5
1225
1300 slab
2,9
1225
1300 slab
3,0
1225
1300 slab
3,0
1500
1600 slab
3,5
1500
1600 slab
4,0
1225
1300 slab
4,0
1500
1600 slab
4,0
1800
1870 slab
4,5
1200
1300 slab
4,5
1260
1300 slab
4,5
1500
1600 slab
4,5
1850
1870 slab
5,0
1020
1100 slab
5,0
1200
1300 slab
5,0
1500
1600 slab
5,0
1800
1870 slab
5,5
1260
1300 slab
6,0
1200
1300 slab
6,0
1500
1600 slab
6,0
1800
1870 slab
6,0
1925
1950 slab
8,0
1200
1300 slab
8,0
1500
1600 slab
8,0
1800
1870 slab
8,0
1925
1950 slab
10,0
1200
1300 slab
10,0
1500
1600 slab
10,0
1800
1870 slab
10,0
1925
1950 slab
12,0
1200
1300 slab
12,0
1500
1600 slab
12,0
1800
1870 slab
12,0
1925
1950 slab
Note: (a) ex-Vanderbijlpark Steel only.
(b) ex-Saldanha Steel only.
LOW CARBON QUALITIES (Continued)
2017-04-01
Cancels and supersedes issue dated
Product condition
Un-pickled, mill edge coils
Un-pickled, mill edge full coils
Un-pickled, mill edge full coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge full coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
2017-03-01
Page 11
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
2.
COMMERCIAL QUALITY (VASTRAP) (Code 123008)
3,0
1200
1300 slab
Un-pickled, mill edge coils
4,5
1200
1300 slab
Un-pickled, mill edge coils
6,0
1200
1300 slab
Un-pickled, mill edge coils
8,0
1200
1300 slab
Un-pickled, mill edge coils
3.
SAE 1008 (Code 098 000)
3,0
1200
1300 slab
3,5
1200
1300 slab
STRUCTURAL GRADES
4.
EN 10025 – 2 – S275 JR+AR (code 989 000)
1,6
1000
1100 slab
2,0
1225
1300 slab
3,0
1225
1300 slab
5,0
1200
1300 slab
5,0
1500
1600 slab
5,0
1825
1870 slab
6,0
1200
1300 slab
6,0
1500
1600 slab
6,0
1825
1870 slab
8,0
1200
1300 slab
8,0
1500
1600 slab
8,0
1825
1870 slab
10,0
1200
1300 slab
10,0
1500
1600 slab
10,0
1825
1870 slab
12,0
1200
1300 slab
12,0
1500
1600 slab
12,0
1825
1870 slab
2017-04-01
Cancels and supersedes issue dated
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
2017-03-01
Page 12
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
EN 10025 – 2 - S355 JR+AR (code 820 000)
1,5
1220 (a)
1300 slab
1,6
1220 (a)
1300 slab
1,9
1220 (a)
1300 slab
2,0
1220 (a)
1300 slab
2,4
1220 (a)
1300 slab
2,9
1220 (a)
1300 slab
2,5
965
1000 slab
3,0
1225
1300 slab
4,0
1225
1300 slab
4,0
1500
1600 slab
4,5
1200
1300 slab
4,5
1500
1600 slab
5,0
1200
1300 slab
5,0
1500
1600 slab
5,0
1825
1870 slab
6,0
1200
1300 slab
6,0
1500
1600 slab
6,0
1825
1870 slab
6,0
1925
1950 slab
8,0
1200
1300 slab
8,0
1500
1600 slab
8,0
1800
1870 slab
8,0
1925
1950 slab
10,0
1200
1300 slab
10,0
1500
1600 slab
10,0
1800
1870 slab
10,0
1925
1950 slab
12,0
1200
1300 slab
12,0
1500
1600 slab
12,0
1800
1870 slab
12,0
1925
1950 slab
Note: (a) ex-Saldanha only.
5.
2017-04-01
Cancels and supersedes issue dated
Un-pickled, mill edge full coils
Un-pickled, mill edge full coils
Un-pickled, mill edge full coils
Un-pickled, mill edge full coils
Un-pickled, mill edge full coils
Un-pickled, mill edge full coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
2017-03-01
Page 13
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
TUBE & LINE PIPE STEEL
6.
SAE 1008 (Si 0,03%) (Code 098 007)
1000 (a)
1,5
1100 slab
1219
(b)
1,5
1300 slab
1,6
1219
1300 slab
1,6
1225
1300 slab
1,85
1219
1300 slab
1,9
1219
1300 slab
1,9
1225
1300 slab
2,2
1290
1400 slab
2,3
1140
1200 slab
2,4
1225
1300 slab
2,5
1500
1600 slab
2,8
1225
1300 slab
2,8
1495
1600 slab
2,9
1225
1300 slab
3,0
1225
1300 slab
3,0
1350
1400 slab
3,0
1500
1600 slab
3,2
1500
1600 slab
3,5
1390
1500 slab
3,5
1570
1600 slab
3,8
1195
1300 slab
3,8
1425
1500 slab
3,9
1225
1300 slab
3,9
1420
1500 slab
4,0
1440
1500 slab
4,2
1550
1600 slab
4,3
1380
1400 slab
4,4
1200
1300 slab
5,0
1500
1600 slab
5.5
1500
1600 slab
5,65
1380
1400 slab
5,95
1115
1200 slab
5,95
1430
1500 slab
6.0
1500
1600 slab
Note: (a) ex-Vanderbijlpark Steel only.
(b) ex-Saldanha Steel only.
7.
SAE 1008 (LOW S) (code 098 013)
1,6
1200
1300 slab
1,8
1200
1300 slab
2,0
1300
1400 slab
2,2
1290
1400 slab
8.
1,6
1,8
SAE 1010 (LOW S) (code 099001)
1200
1300 slab
1185
1300 slab
Un-pickled, mill edge coils
Un-pickled, mill edge full coils
Un-pickled, mill edge full coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge full coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
TUBE & LINE PIPE STEEL
9.
EN 10219 – 1 – S275 JOH (S275 Tube) (code 561 000)
2,8
1590
1600 slab
Un-pickled, mill edge coils
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page 14
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
10.
2,5
2,9
2,9
3,2
3,4
3,4
3,8
4,3
4,3
4,3
4,4
4,5
4,8
4,8
4,8
5,0
5,8
5,8
EN 10219 – 1 – S355 MH (S355 Tube) (code 558 000) (Continued)
1195
1300 slab
Un-pickled, mill edge coils
1195
1300 slab
Un-pickled, mill edge coils
1325
1400 slab
Un-pickled, mill edge coils
1485
1600 slab
Un-pickled, mill edge coils
1195
1300 slab
Un-pickled, mill edge coils
1420
1500 slab
Un-pickled, mill edge coils
1425
1500 slab
Un-pickled, mill edge coils
1380
1400 slab
Un-pickled, mill edge coils
1425
1300 slab
Un-pickled, mill edge coils
1540
1600 slab
Un-pickled, mill edge coils
1380
1400 slab
Un-pickled, mill edge coils
1185
1300 slab
Un-pickled, mill edge coils
1300
1400 slab
Un-pickled, mill edge coils
1435
1500 slab
Un-pickled, mill edge coils
1555
1600 slab
Un-pickled, mill edge coils
1480
1300 slab
Un-pickled, mill edge coils
1380
1400 slab
Un-pickled, mill edge coils
1575
1600 slab
Un-pickled, mill edge coils
TUBE & LINE PIPE STEEL
11a.
API 5L L290 / X42 PSL1 (Code 003 005) ERW – PIPES
4,3
865
960 slab
Un-pickled, mill edge coils
4,3
1020
1050 slab
Un-pickled, mill edge coils
4,3
1120
1150 slab
Un-pickled, mill edge coils
4,3
1280
1320 slab
Un-pickled, mill edge coils
4,3
1400
1440 slab
Un-pickled, mill edge coils
4,3
1440
1440 slab
Un-pickled, mill edge coils
4,3
1600
1650 slab
Un-pickled, mill edge coils
5,7
860
960 slab
Un-pickled, mill edge coils
5,7
1020
1050 slab
Un-pickled, mill edge coils
5,7
1120
1150 slab
Un-pickled, mill edge coils
5,7
1280
1320 slab
Un-pickled, mill edge coils
5,7
1400
1440 slab
Un-pickled, mill edge coils
5,7
1440
1440 slab
Un-pickled, mill edge coils
5,7
1600
1650 slab
Un-pickled, mill edge coils
6,0
1925
1950 slab
Un-pickled, mill edge coils
7,6
855
960 slab
Un-pickled, mill edge coils
7,6
1020
1050 slab
Un-pickled, mill edge coils
7,6
1110
1150 slab
Un-pickled, mill edge coils
7,6
1275
1320 slab
Un-pickled, mill edge coils
7,6
1400
1440 slab
Un-pickled, mill edge coils
7,6
1430
1440 slab
Un-pickled, mill edge coils
7,6
1590
1600 slab
Un-pickled, mill edge coils
7,6
1910
1950 slab
Un-pickled, mill edge coils
9,5
850
960 slab
Un-pickled, mill edge coils
9,5
1020
1050 slab
Un-pickled, mill edge coils
9,5
1110
1150 slab
Un-pickled, mill edge coils
9,5
1275
1320 slab
Un-pickled, mill edge coils
9,5
1400
1440 slab
Un-pickled, mill edge coils
9,5
1430
1440 slab
Un-pickled, mill edge coils
9,5
1590
1600 slab
Un-pickled, mill edge coils
9,5
1910
1950 slab
Un-pickled, mill edge coils
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page 15
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
API 5L L290 / X42 PSL1 (Code 003 005) SAW – SPIRAL PIPES (Continued)
4,3
1400
1440 slab
Un-pickled, mill edge coils
4,3
1490
1500 slab
Un-pickled, mill edge coils
5,7
1400
1440 slab
Un-pickled, mill edge coils
5,7
1490
1500 slab
Un-pickled, mill edge coils
5,7
1600
1650 slab
Un-pickled, mill edge coils
5,7
1675
1700 slab
Un-pickled, mill edge coils
6,0
1800
1820 slab
Un-pickled, mill edge coils
7,6
1400
1440 slab
Un-pickled, mill edge coils
7,6
1490
1500 slab
Un-pickled, mill edge coils
7,6
1600
1650 slab
Un-pickled, mill edge coils
7,6
1675
1700 slab
Un-pickled, mill edge coils
8,0
1800
1820 slab
Un-pickled, mill edge coils
9,5
1400
1440 slab
Un-pickled, mill edge coils
9,5
1490
1500 slab
Un-pickled, mill edge coils
9,5
1600
1650 slab
Un-pickled, mill edge coils
9,5
1675
1700 slab
Un-pickled, mill edge coils
10,0
1800
1820 slab
Un-pickled, mill edge coils
11b.
TUBE & LINE PIPE STEEL
12.
API 5CT J55 (code 645 000)
6,2
1400
1440 slab
7,8
1065
1100 slab
8,5
885
960 slab
8,5
1400
1440 slab
8,5
1570
1600 slab
9,0
1065
1100 slab
9,5
1570
1600 slab
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
Un-pickled, mill edge coils
STRUCTURAL STEEL WITH IMPROVED FORMABILITY
13.
SUPRAFORM S315 MC/EN 10149 – 2 –S315 MC (code 556 000)
3,0
1225
1300 slab
Un-pickled, mill edge coils
4,0
1225
1300 slab
Un-pickled, mill edge coils
4,5
1350
1400 slab
Un-pickled, mill edge coils
5,0
1500
1600 slab
Un-pickled, mill edge coils
6,0
1500
1600 slab
Un-pickled, mill edge coils
14.
SUPRAFORM S355 MC/EN 10149 – 2 –S355 MC (code 557 000)
3,0
1225
1300 slab
Un-pickled, mill edge coils
4,0
1225
1300 slab
Un-pickled, mill edge coils
5,0
1500
1600 slab
Un-pickled, mill edge coils
6,0
1500
1600 slab
Un-pickled, mill edge coils
8,0
1500
1600 slab
Un-pickled, mill edge coils
10,0
1500
1600 slab
Un-pickled, mill edge coils
12,0
1500
1600 slab
Un-pickled, mill edge coils
15.
SUPRAFORM S420 MC/EN 10149 – 2 –S420 MC (code 559 001)
2,3
1185
1300 slab
Un-pickled, mill edge coils
2,5
1225
1300 slab
Un-pickled, mill edge coils
3,0
1300
1400 slab
Un-pickled, mill edge coils
3,2
1230
1300 slab
Un-pickled, mill edge coils
4,0
1500
1600 slab
Un-pickled, mill edge coils
5,0
1200
1300 slab
Un-pickled, mill edge coils
5,0
1500
1600 slab
Un-pickled, mill edge coils
6,0
1500
1600 slab
Un-pickled, mill edge coils
8,0
1500
1600 slab
Un-pickled, mill edge coils
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page 16
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
16.
SUPRAFORM S550 MC/EN 10149 – 2 –S550 MC (code 530 000) (Continued)
3,0
1225
1300 slab
Un-pickled, mill edge coils
4,0
1225
1300 slab
Un-pickled, mill edge coils
5,0
1500
1600 slab
Un-pickled, mill edge coils
6,0
1500
1600 slab
Un-pickled, mill edge coils
8,0
1500
1600 slab
Un-pickled, mill edge coils
17.
SUPRAFORM HR 290 (S0,010%) (code 582 005)
4,5
1350
1400 slab
SPECIAL APPLICATION STEEL
18.
SANS 1350 (Code 705 000)
2.6
1450
1500 slab
Un-pickled, mill edge coils
Un-pickled, mill edge coils
HIGH CARBON/ALLOYED STEEL
19.
WEARPLATE 200 (code 107 000)
2.0
840
960 slab
Un-pickled, mill edge coils
2.5
1200
1300 slab
Un-pickled, mill edge coils
3.0
1200
1300 slab
Un-pickled, mill edge coils
4.5
1200
1300 slab
Un-pickled, mill edge coils
5.0
1200
1300 slab
Un-pickled, mill edge coils
6.0
1200
1300 slab
Un-pickled, mill edge coils
Note: Requests for additional Standard Items can be made via your Account Manager.
Such requests will be submitted for evaluation and approval by ArcelorMittal South Africa Management.
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page 17
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
COIL MASS TABLE FOR: LINE PIPE STEEL - API
ANNEXURE 2
SLAB WIDTH
FINAL PRODUCT WIDTH
Mill edge (HCW)
Nominal Full-coil mass
(ton)
960
850 to 960
17
1000
960 to 1000
18
1050
1010 to 1050
19
1100
1060 to 1100
20
1150
1110 to 1150
21
1200
1160 to 1200
22
1320
1270 to 1320
24
1440
1390 to 1440
25
1500
1450 to 1490
27
1600
1550 to 1590
26
1650
1600 to 1640
26,5
1700
1650 to 1680
27
1760
1710 to 1740
28
1820
1770 to 1800
29
1950
1895 to 1925
30
Note: Coil mass table only applicable for qualities 002001; 003005; 003002; 342009; 342007; 760000;
760001; 835000; 835004; 645000 and 645001
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page 18
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
COIL MASS TABLE
ANNEXURE 2
SLAB WIDTH
FINAL PRODUCT WIDTH
Mill edge (HCW)
760 to 940
830 to 940
945 to 980
985 to 1080
1085 to 1180
1185 to 1280
1285 to 1380
1385 to 1480
1485 to 1590
1595 to 1690
1695 to 1790
1795 to 1890
1895 to 1925
960
960 (High Carbon & Alloyed)
1000
1100
1200
1300
1400
1500
1600 5-skid
1700 5-skid
1800 5-skid
1900 5-skid
1950 5-skid
Nominal Full-coil mass
(ton)
17
17
18
20
22
24
25
27
26
27
29
30
30
Tolerance on coil mass: +10% -25% (Light Mass – 30%)
Notes:
1) Availability of Product Widths is subject to Slab Width availability, width/thickness ratios and type of
steel, please refer to detail of availability in Data sheet: Hot strip mill product dimensions; and the slab
widths available as shown in paragraph 4, pages 4 to 7.
2) For Price List 115 (Vastrap) the coil can be ½ size or full size. Vastrap is only available in Mill Edge.
3)
For production and delivery ex-Saldanha Steel, the item number of coils will be determined
according to this coil mass table for Gauges > 1,5mm.
SLAB WIDTH
960
1000
1100
1200
1300
1400
1500
1600 5-skid
1700 5-skid
1800 5-skid
1870 5-skid


FINAL PRODUCT WIDTH
Side Trimmed (HC<3.5mm)
Side Trimmed (HC>3.5mm)
 750 to 900
 750 to 890
 905 to 940
 895 to 930
 945 to 1040
 935 to 1030
 1045 to 1140
 1035 to 1130
 1145 to 1240
 1135 to 1230
 1245 to 1340
 1235 to 1330
 1345 to 1440
 1335 to 1430
 1445 to 1540
 1435 to 1530
 1545 to 1630
 1535 to 1620
 1635 to 1730
 1625 to 1720
 1735 to 1830
 1725 to 1820
Nominal Full-coil mass
(ton)
16
17
19
21
23
24
26
25
26
28
30
Tolerance on coil mass: +10% -25% (Light Mass – 30 %)
Notes:
1) Availability of Product Widths is subject to Slab Width availability, width/thickness ratios and type of
steel; please refer to detail of availability in Data sheet: Hot strip mill product dimensions; and the
slab widths available as shown in paragraph 4, pages 4 to 9.
2) High Carbon and Alloyed Steels are available as Mill Edge only (not as side trimmed).
3) Production and delivery ex-Saldanha Steel available as Mill Edge only (not as side trimmed)
2017-04-01
Cancels and supersedes issue dated
2017-03-01
Page 19
EXTRAS LIST 120 & 115
HOT ROLLED SHEET IN COIL
Effective: 01 APRIL 2017
OVERAGE / UNDERAGE
ANNEXURE 3
(DESPATCH TOLERANCES ON ORDER TONNAGE PER ITEM)
The principle of a discrete full-slab-coil as smallest sales unit applies
(Please also refer to text at paragraph 3.2, page 1).
Number of
Full Slab Coils*
STANDARD ITEM
%OVER / % UNDER
STANDARD ITEM
OPTION2 (Code2010)
%OVER / % UNDER
1
+10/-25
Not Applicable
2
+10/-55
+30/-25
3
+10/-37
+20/-17
4
+10/-28
+15/-13
5
+10/-22
6
+10/-18
7
+10/-16
8
+10/-14
9
+10/-12
10
+10/-11
>10
Note: * FSC = Full Slab Coil
Not Applicable
+1 FSC* / - 1,1 FSC*
Number of
Full Slab Coils
NON-STANDARD ITEM
%OVER / % UNDER
NON-STANDARD ITEM
OPTION2 (Code1020)
%OVER / % UNDER
2
+10/-55
+55/-30
3
+10/-37
+36/-20
4
+10/-28
+27/-15
5
+10/-22
6
+10/-18
7
+10/-16
8
+10/-14
9
+10/-12
10
+10/-11
>10
+10/-10
2017-04-01
Cancels and supersedes issue dated
Not Applicable
2017-03-01
Page 20