Chilled filtered water, plus sparkling chilled
filtered water!
Residential model saving time, money and
energy at home
Zip Domestic Chilltap Chilled and Sparkling
Filtered with Chrome tap
Can be installed away from any sink with the optional Zip “font” accessory
Zip ChillTap Sparkling brings you sparkling chilled filtered water as well as
chilled still filtered water.
Simple to operate and with more safety features than ever
•
•
•
•
•
Gives chilled filtered drinking water at a fraction of the cost of
bottled water
PLUS sparkling chilled filtered drinking water that tastes great on
its own as well as enhancing the flavour of cordials, juices, spirits
and wines
Pull the white lever forward for controlled flow of still drinking
water
Pull the blue lever forward for a controlled flow of sparkling
drinking water
Robust stainless steel spout swivels out of the way when not in
use
Simple to install at any sink – or away from the sink
•
•
•
A single hole in the work surface is all you need for installation by
most sinks
Or install the tap away from the sink with the optional “font”
accessory
The “font” eliminates the need for a sink and drains drips away to
waste
Supplied with submicron water filtration for crystal-clear, greattasting water
•
•
•
Filters out chlorine, lead, rust, asbestos fibres and volatile organic
compounds
Removes impurities larger than one five-thousandth of a
millmetre, including the protozoan cysts Cryptosporidium and
Giardia. Does not remove fluoride
Tested and certified by NSF International to NSF/ANSI standards
42 and 53
Zip Domestic Chilltap Chilled and Sparkling filtered
Product Selection Chart
Product
Code
DOMCTS
Chilled
Water
YES
∗
Sparkling
Water
YES
Chilled
Glasses/hr
Total Rating
@ 230V
125
0.2kW
Delivery Temp *
Chilled Sparkling
Flow rate (ltr/min
Chilled Sparkling
3 - 6OC
4.0
3 - 6 OC
Gas Pressure
Under-sink
(bar) W X D X H
1.2 – 1.8
2.7
356 x 250 x 367
Not under Free-Flow conditions
Location
Carbon Dioxide
Accessories
The tap must be installed to dispense into a
suitable sink or on the optional Tap Font Kit
and, if possible, be situated directly above the
operational unit, maximum 1 metre away.
The operational unit must have a minimum
clearance of 50mm left and right and 150mm
above. Cupboard door should be offset using
4mm buffers provided.
The CO2 gas cylinder supplied must be
secured in a suitable location using the strap
provided. Gas regulator supplied must be
fitted. Each cylinder contains 1 kg of CO2
and should be installed in a well ventilated
room or if it is an enclosed space in an area
no less than 38m2.
See website, www.zipheaters.co.uk for gas
cylinder MSDS sheet for list of warnings.
ZT004 - Tap Font Kit
ZT400 - Twin pack CO2 cylinders
ZT002 - Submicron replacement filter
Plumbing
To be installed in accordance with the fitting
instruction and UK Water Regulations.
Water supply must be potable (drinkable) with
a minimum pressure of 1.4 bar. If pressure
exceeds 7 bar a pressure limiting valve must
be fitted. An isolating valve should be
installed between the mains supply and the
system.
Electrical
Should be installed by a competent person
in accordance with the fitting instructions
supplied and the UK Electrical Regulations.
Should be connected to a 13 amp power
supply.
Warranty
1 year on site parts and labour. For full
details visit www.zipheaters.co.uk
Technical Support
Contact Zip on tel: 0800 077 8302