Cascading the Segmental Elements
Quadrant Assembly
Provisional Patent Drawings D5-E-H
3/4/2012
Provisional Patent Draft Drawings D5-E
to H.
1
HE-57 is reduced to (4)-HE-44 blocks and further reduced
referenced as the SM-11 by simply using a water jet along cut lines.
3/4/2012
Provisional Patent Draft Drawings D5-E
to H.
2
Individual chamber for fuel, anticipated to be used as a stand alone
test kit chamber not Modified. For cascading purposes use M series.
3/4/2012
Provisional Patent Draft Drawings D5-E
to H.
3
Modified Single Segment, cut lines were offset .0625” original cut
lines 1/8” removed total mass. To accommodate cascading.
3/4/2012
Provisional Patent Draft Drawings D5-E
to H.
4
1/8” wide cut path allows Copper Sink .125” thick, an addition
suggested by Lui and a benefit for heat transfer.
3/4/2012
Provisional Patent Draft Drawings D5-E
to H.
5
Cascading to this geometry is the Plate Kit. Multiple arrays are
anticipated. This Plate Kit is only used on the M series parts.
3/4/2012
Provisional Patent Draft Drawings D5-E
to H.
6
Modified series Copper Sink to threadably attach to S-11/M and
produce a HE-44/66/or 88.
3/4/2012
Provisional Patent Draft Drawings D5-E
to H.
7