503339 - 7" Graphic Touch Screen
503340 - 10.1" Graphic Touch Screen
Installation Instructions
Installation Instructions
Tools Required for Installation:
Tape Measure
Pencil
Caution
(1) This equipment should not be installed, operated or maintained by any
person who has not read all the contents of these instructions.
(2) Before connecting switches, controls, or electrical, make sure power is
off. Wiring indicated in diagram by dashed lines must be completed by
an electrician.
(3) Locate the Touch Panel so it is within clear view of the equipment being
operated; it should also be in a location that will minimize the chance of
damage.
Screwdriver
Mounting Smart Gym Touch Screen
NOTE: The 503339-Smart Gym 1” Touch Screen installs over a standard 2-gang switch box.
To mount the Smart Gym Touch Screen on an electrical box, use the following procedure:
(1) Use the four included #6-32 x ¾” screws to attach the metal mounting bracket to the electrical box as shown in the following illustration (see Fig. (2)).
(2) Make cable connections to the Touch screen. Touch screen requires connection to the Smart Gym Control Processor assembly with CAT5 or
better cable with RJ-45 connector at each end.
(3) Carefully hold the touch screen over the mounting bracket and gently place it in position. The magnets on the rear of the screen hold it in place
on the mounting bracket.
Backstop Winch Divider
Curtain Electric Height Adjuster
or Other Device
(One wire run per device)
Figure (1)
Relay Panel
503062 - 8 Relays
503063 - 16 Relays
503064 - 24 Relays
503066 - 32 Relays
503067 - 40 Relays
503068 - 48 Relays
503069 - 56 Relays
(2 Relays per directional device
and one per ON/OFF device)
Smart Gym Control
Smart Gym
Control
Processor
Assembly
Processor
Assembly
503024
503024
115V - 3 Conductor
115V - 4 Conductor
24V Communication - 18/4 Shielded Pairs
Optional Wi-Fi
Control Kit
503342
Touch Screen
503339 - 7”
503340 - 10.1”
Ethernet - CAT5 or CAT6
Figure (2)
Copyright ©2016 Draper Inc.
Form SmartGym_Install_7&10_Display_Inst16
If you encounter any difficulty installing or servicing your Smart Gym by Draper, call your
dealer or Draper, Inc., Spiceland, Indiana, (765) 987-7999 or fax (765) 987-7142.
Printed in U.S.A.