IAG - Industrie Automatisierungsgesellschaft m.b.H
Test Cell Technology
consistently advancing
More than 30 years
of Austrian innovation
Company History
IAG Industrie Automatisierungs Gesellschaft mbH was founded
in 1986. From the very beginning, IAG has been active in
the manufacturing of complex special-purpose machinery.
IAG develops fully automatic machinery and systems for the
manufacturing of brake pads and has become a global market
leader in this industry.
Our competent and experienced team, currently comprising a
staff of approximately 100, is able to meet the most exacting
customer requirements by implementing recent technologies
to achieve innovative, customized solutions.
2
Experience gathered over many years in general engineering as
well as in electrical engineering and control technology enable
us at IAG to develop and realize highly complex solutions.
IAG Test Cell Technology offers an extensive range of products
for exhaust gas measurement in engine development as well as
for the associated test cell environment.
The high quality of our products, our flexibility in developing
custom solutions and our exceptional service make us a
dependable partner.
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
History of IAG Test Cell Technology
2002 Establishment of the Company “Artech”
2003 Development of the First VFC Pre-Filter with Integrated Pressure Regulator
2006 Integration of “Artech” into IAG
Development of the VFS Pre-Filter with Multiple Gas Inlets
2007 First FTIR-Analyzing Systems are Sold
2011 Development of the FTIR-Analyzing Systems FAS05 Versa
The First Combined Measurement System Delivered (Synthesis Gas Test Bench)
2014 Over 1000 Sampling Systems (PNS) are Manufactured
2015 More than 70 FTIR-Analyzing Systems are in Use
2016 Launch of FTIR-Analyzing Systems versa06
Systems and components of IAG Industrie Automatisierungs
Gesellschaft are used worldwide.
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
3
Our key principle is to provide you
with the best customer service.
IAG Service Philosophy
Custom Solutions
Optimum customer care is our overriding principle. This means
responding to customer requirements on an individual basis and
developing tailored solutions in every case.
We are constantly developing customized solutions for specific
usage requirements. From tailor-made modules to be integrated
into existing systems, to the full development of devices and
equipment exclusively branded for the customer. We have a
long tradition of building engineering solutions in the areas of
hardware and software.
The range extends from a convenient, all-inclusive service contract
that covers all maintenance and repair costs, to self-maintenance
carried out by the user. This can be accomplished through
the simple replacement of component groups or complete
maintenance by the customer.
Stefan Handler Sales and Customer Service Manager
Ing. Rainer Pokorny Technical Manager
Using IAG system construction kits with many common parts,
only a minimal number of wearing parts are required to be able to
constantly guarantee usability.
We always keep a very extensive stock of replacement parts to
ensure the shortest possible amount of downtime in every case.
4
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
Product Overview
versa06
P.6
VFS
P.14
versa06 dual
P.8
VFC
P. 15
VFE
P.19
FLS
P.24
versa06 plus
P.10
VFD
P.16
VFH
P.20
MSJ
P.25
Analyzing Systems
NMS
P.12
LFD
P.17
ADR02
P.18
LFS
P.21
FILTER
P.22
MGK
P.26
HSV
P.27
Pre-Filters /
Pressure Regulators
Pre-Filters
Gas Feed
TRE01
P.28
TRE05
P.28
TRE08
P.29
MTS
P.30
Test Cell Equipment
Subject to technical alterations, errors and misprints excepted.
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
5
versa06
FTIR Analyzing system
updates being automatically passed on to users. Calibrations are
permanently stored on the device and checked once a year.
Accuracy and Response:
Analyzing Systems
Simple Touchscreen
Operation
NH3
180
160
140
120
100
80
60
40
20
0
0
1000
500
NH3 IAG ppm
1500
2000
NH3 Competitor ppm
N2O
25
Easy Charging for
Automatic LN2 Refill
20
15
10
Easy Charging for
Automatic LN2 Refill
inside
Based on our long lasting experience with the FTIR
technology the IAG versa06 is a reliable and servicefriendly measuring system with high precision and stability.
User friendliness, high dynamic, careful gas flow, easy
maintenance and the flexibility of the modular IAG design
are important advantages of the IAG versa06 exhaust
analyzing systems.
IAG versa06 stands for high availability and low operating costs,
optimizing your use of resources. Based on our years of experience
in treating sample gas, one of the greatest strengths is its ability to
analyze even gas components that are hard to detect.
Calibration:
Every available analyzis method and calibration type is included
in this model. The library is constantly being extended, with all
6
5
0
0
500
N2O IAG ppm
1000
1500
2000
2500
3000
N2O Competitor ppm
Fast response in NH 3 measurement. Clear N2O signal down to far below 1 ppm.
This data was recorded in a comparative measurement with a reference system.
Both samples were taken from one sample point with a flow of 7l/Min.
Careful gas flow within the device plays a central role in the detection
of components that are hard to measure. The benefits of the IAG FTIR
technology is based on optimized gas flow without any cold spots as
well as closed loop control for pressure and temperature in the gas
cell are the base for the precision of the system. As an option the flow
can be adjusted and controlled. For high dynamic measurements
a high speed version with a measuring rate of 5Hz is available.
Communication:
The options for communication with the test bench environment
range from AK serial, TCP or remote desktop connection to straightforward bit parallel control. Adaptation to meet customers’ needs
and providing custom solutions is our standard.
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
versa06
FTIR Analyzing system
Sampling:
The IAG versa06 can be combined with any IAG sampling
modules. The options here extend from a simple heated line sucking
the sample, to extensive multiple extraction systems with pressure
regulators, switching units and high temperature extraction lines.
All sampling modules are remotely controlled by the measurement
device itself and are displayed at the device display panel. Every
parameter such as temperature and switching status for the entire
system can be configured and operated from a central location.
Advantages
+ Precise Closed Loop Gas Cell Pressure Control
+ Short Gas Lines
+ High Dynamic
+ Automatic LN2 Refill
+ Easy Operation and Maintenance
+ Precise Measurement
+ Flexible Setup
+ Low Operating Costs
+ Fixed Calibration
+ Automatic Leak Test
Analyzing Systems
Safety:
Reliable use of the FTIR technology requires new overall concepts of
FTIR analyzing systems. The IAG versa06 includes a safety system
which protects the device from damage in case of an interruption
of the voltage or purge air supplies by full automatic purging.
Options
• Integration of Additional Analyzers
e.g. for HC or O2 Measurement
Service:
We take care of our customers with individually tailored maintenance
solutions. Our offering ranges from full service contracts covering
all running costs to servicing by the user who, thanks to the IAG
modular system, can carry out all maintenance work himself quickly
and easily. Capable care and optimum support are ‘givens’ for our
customers.
• Adjustable Sample Gas Flow
• High-Speed Version with 5Hz Sampling
• Automatic Refill of Liquid Nitrogen
• Integrated Purge Gas Generator
• Cabinet Air-Conditioning for High Ambient
Temperatures
• Gas Removal with Condensate Reservoir
Detectable Components Overview:
• Integration of Sampling Systems
• Various Pump Performance Available
Hydrogen SulfideH2S
AcetyleneC2H2
Isocyanic AcidHNCO
Acetaldehyde
C2H40
Methane
CH4
Acrolein
C3H40
Methanol
CH40
AmmoniaNH3
m-Xylene
C8H10
1,3 Butadien
C4H6
Nitric OxideNO
Benzene
C6H6
Nitric OxidesNOx
Carbon DioxideCO2
Nitrogen DioxideNO2
Carbon MonoxideCO
Nitrous Oxide N20
Diesel-
o-Xylene
C8H10
Dodecane
C12H26
Propanal
C3H60
Ethane
C2H6
PropaneC3H8
Ethanol
C2H60
Propylene
C3H6
Ethyl Benzene
C8H10
Sulfur DioxideSO2
Ethylene
C2H4
TolueneC7H8
Formaldehyde
CH20
Total HydrocarbonsTHC
Formic Acid
CH202
Water
H20
Hydrogen CyanideHCN
• Optional Bag Measurement
• Inert Coating
• EPA 1065 Test Procedures
• Special Calibration with 2 % Linearity
• Zirconia Oxygen Measurement
• Lambda Sensor
Technical Data
Dimensions:
900 x 600 x 1260 mm
Sampling Rate:
1 Hz / 5 Hz
Sample Flow:
8-10 l/Min or 12-15 l/Min
Sample Flow 5Hz:
20-25 l/Min
Sample Flow Adjustable:
3-10 l/Min or 4-15l/Min
Sample Flow 5Hz Adjustable:
5-25 l/Min
Purge Gas:
Nitrogen 5.0 or Purified Air
Detector:MCT
Gas Cell:
5.11 m Path Length, 200 ml
Spectral Resolution:
0,5 cm-1
Gas Cell Temperature:
190 °C
Compressed Air Supply:
5 bar, Dry and Oil-Free
Power Supply:
400 V / 16 A CEE
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
7
versa06 dual
FTIR Analyzing system
Calibration:
Every available analyzis method and calibration type is included
in this model. The library is constantly being extended, with all
updates being automatically passed on to users. Calibrations are
permanently stored on the device and checked once a year.
Analyzing Systems
Simple
Touchscreen
Operation
Accuracy and Response:
NH3
180
160
140
120
100
80
60
40
20
0
0
1000
500
NH3 IAG ppm
1500
2000
NH3 Competitor ppm
N2O
25
20
15
Easy Charging for
Automatic LN2 Refill
inside
10
5
0
The versa06 dual FTIR analyzing Systems offer two independent FTIR-Analyzers for simultaneous measurement at two
independent sampling points.
The evaluation of the two measuring circuits with the same
operating surface guarantees for optimum user friendliness. The
consequent 2-line gas management ensures high dynamic in both
measuring circuits. Easy maintenance and the flexibility of the
modular IAG design are further advantages of the IAG versa06
dual FTIR analyzing Systems.
IAG versa06 dual stands for high availability and low operating
costs, optimizing your use of resources. Based on our years of experience in treating sample gas, one of the greatest strengths is
its ability to analyze even gas components that are hard to detect.
8
0
500
N2O IAG ppm
1000
1500
2000
2500
3000
N2O Competitor ppm
Fast response in NH 3 measurement. Clear N2O signal down to far below 1 ppm.
This data was recorded in a comparative measurement with a reference system.
Both samples were taken from one sample point with a flow of 7l/Min.
Careful gas flow within the device plays a central role in the detection
of components that are hard to measure. The benefits of the IAG FTIR
technology is based on optimized gas flow without any cold spots as
well as closed loop control for pressure and temperature in the gas
cell are the base for the precision of the system. As an option the flow
can be adjusted and controlled. For high dynamic measurements
a high speed version with a measuring rate of 5Hz is available.
Communication:
The options for communication with the test bench environment
range from AK serial, TCP or remote desktop connection to straight
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
versa06 dual
FTIR Analyzing system
Advantages
+ Simultaneous Measurement at 2 Different
Sampling Points
+ Precise Closed Loop Gas Cell Pressure Control
+ Short Gas Lines
+ High Dynamic
+ Automatic LN2 Refill
+ Easy Operation and Maintenance
+ Precise Measurement
+ Flexible Setup
+ Low Operating Costs
+ Fixed Calibration
+ Automatic Leak Test
Sampling:
The IAG versa06 dual can be combined with any IAG sampling
modules. The options here extend from a simple heated line sucking
the sample, to extensive multiple extraction systems with pressure
regulators, switching units and high temperature extraction lines.
All sampling modules are remotely controlled by the measurement
device itself and are displayed at the device display panel. Every
parameter such as temperature and switching status for the entire
system can be configured and operated from a central location.
Service:
We take care of our customers with individually tailored maintenance
solutions. Our offering ranges from full service contracts covering
all running costs to servicing by the user who, thanks to the IAG
modular system, can carry out all maintenance work himself quickly
and easily. Capable care and optimum support are ‘givens’ for our
customers.
Options
•
•
•
•
Detectable Components Overview:
Hydrogen SulfideH2S
AcetyleneC2H2
Isocyanic AcidHNCO
Acetaldehyde
C2H40
Methane
CH4
Acrolein
C3H40
Methanol
CH40
AmmoniaNH3
m-Xylene
C8H10
1,3 Butadien
C4H6
Nitric OxideNO
Benzene
C6H6
Nitric OxidesNOx
Carbon DioxideCO2
Nitrogen DioxideNO2
Carbon MonoxideCO
Nitrous Oxide N20
Diesel–
o-Xylene
C8H10
Dodecane
C12H26
Propanal
C3H60
Ethane
C2H6
PropaneC3H8
Ethanol
C2H60
Propylene
C3H6
Ethyl Benzene
C8H10
Sulfur DioxideSO2
Ethylene
C2H4
TolueneC7H8
Formaldehyde
CH20
Total HydrocarbonsTHC
Formic Acid
CH202
Water
H20
Hydrogen CyanideHCN
Analyzing Systems
forward bit parallel control. Adaptation to meet customers’ needs
and providing custom solutions is our standard.
Integration of Additional Analyzers
e.g. for HC or O2 Measurement
Adjustable Sample Gas Flow
High-Speed Version with 5Hz Sampling
Automatic Refill of Liquid Nitrogen
• Integrated Purge Gas Generator
• Cabinet Air-Conditioning for High Ambient
Temperatures
• Gas Removal with Condensate Reservoir
• Integration of Sampling Systems
• Various Pump Performance Available
• Optional Bag Measurement
• Inert Coating
• EPA 1065 Test Procedures
• Special Calibration with 2 % Linearity
• Zirconia Oxygen Measurement
• Lambda Sensor
Technical Data
Dimensions:
900 x 600 x 1700 mm
Sampling Rate:
1 Hz / 5 Hz
Sample Flow:
2 x 8-10 l/Min or 2 x 12-15 l/Min
Sample Flow 5Hz:
2 x 20-25 l/Min
Sample Flow Adjustable:
2 x 3-10 l/Min or 2 x 4-15l/Min
Sample Flow 5Hz Adjustable:
2 x 5-25 l/Min
Purge Gas:
Nitrogen 5.0 or Purified Air
Detector:
2 x MCT
Gas Cell:
2 x 5.11 m Path Length, 200 ml
Spectral Resolution:
0,5 cm-1
Gas Cell Temperature:
190 °C
Compressed Air Supply:
5 bar, Dry and Oil-Free
Power Supply:
400 V / 16 A CEE
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
9
versa06 plus
Exhaust gas Analyzing system
directly in the test cell, the FTIR can only show its true strength if
the overall design of the device has been developed accordingly.
Analyzing Systems
Simple
Touchscreen
Operation
This has required developments ranging from a climate control unit
for high and fluctuating ambient temperatures to safety switches
that safeguard the device from damage in the event of an interruption
to the voltage or purge air supplies.
Analyzers:
Our aim is to provide the ideal solution for any application and to
allow every user to make use of tried and trusted measurement
technology. We therefore support the option of integrating all
analyzers available on the market and of combining these to achieve
a complete customized system.
Gas Feed:
Precise gas flow within the device plays a central role in the
detection of components that are hard to measure. This
system is based on an optimized design, providing for the shortest
possible gas flows as well as precise pressure levels and temperature
conditioning. Users have the option of disconnecting analyzers
individually from the gas flow without affecting the system
dynamics, or to make measurements only using the FTIR with
a short sampling line via a separate sample gas inlet. The use
of a heated sample gas pump renders the system insensitive,
within a wide range, to varying pressures at the sampling point.
Easy Charging for
Automatic LN2 Refill
inside
The versa06 plus measuring system offers a wide variety
of configuration options, “plus” stands for the combination
of FTIR and conventional measuring technology.
The IAG versa06 plus combines in a single system the wide range
of options offered by FTIR technology with the reliability of standard
measurement technology.
The outstanding features of the IAG versa06 plus include ease
of use, large dynamic measurement range, precise gas feed,
maintenance friendliness and the flexibility offered by the IAG
module system.
Calibration:
Dependable use of FTIR technology also means specific considerations
as to how a measurement device is designed. As with any
measure­ment device that needs to be used flexibly and if necessary,
10
Communication:
The options for communicating with the test cell environment
range from AK serial, TCP or remote desktop connection to straightforward bit parallel control. The measurement reading can be
outputted via the relevant interface, or via fully customisable
analogue outputs where storage of measurement readings can be
started or triggered independently by the measurement process.
Adaptation to meet customers’ needs and providing custom
solutions is the norm for us.
Operation:
The system is operated either directly using the 17” TFT touch
screen or via remote desktop. The user interface of the IAG versa06
plus is structured clearly and flexibly and offers all the features users
have come to expect from advanced control interfaces.
Sampling:
The IAG versa06 plus can of course be combined with any IAG
sampling module. The options here extend from a simple heated
line, serving as a suction feed for the measurement device, to
extensive multiple extraction systems with pressure regulators,
switching units and high temperature extraction lines. All sampling
modules are remotely controlled from the measurement device
itself and are also displayed in the device display panel. This means
that every parameter such as temperature and switching status for
the entire system can be configured and operated from a central
location.
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
versa06 plus
Exhaust gas Analyzing system
Advantages
+ Customized Analyzing Modules
+ Portable Use
+ Precise Measurement
+ Flexible Setup
+ Low Operating Costs
+ Easy Maintenance
Detectable Components Overview:
Hydrogen SulfideH2S
AcetyleneC2H2
Isocyanic AcidHNCO
Acetaldehyde
C2H40
Methane
CH4
Acrolein
C3H40
Methanol
CH40
AmmoniaNH3
m-Xylene
C8H10
1,3 Butadien
C4H6
Nitric OxideNO
Benzene
C6H6
Nitric OxidesNOx
Carbon DioxideCO2
Nitrogen DioxideNO2
Carbon MonoxideCO
Nitrous Oxide N20
Diesel–
o-Xylene
C8H10
Dodecane
C12H26
Propanal
C3H60
Ethane
C2H6
PropaneC3H8
Ethanol
C2H60
Propylene
C3H6
Ethyl Benzene
C8H10
Sulfur DioxideSO2
Ethylene
C2H4
TolueneC7H8
Formaldehyde
CH20
Total HydrocarbonsTHC
Formic Acid
CH202
Water
H20
Hydrogen CyanideHCN
Analyzing Systems
Service:
We take care of our customers with individually tailored maintenance
solutions. Our offering ranges from full service contracts covering
all running costs to servicing by the user who, thanks to the IAG
modular system, can carry out all maintenance work himself quickly
and easily. Capable care and optimum support are ‘givens’ for our
customers.
+ Automatic Leak Test
Options
• Integration of a Wide Variety of Analyzers
• Direct Input Port for FTIR Measurement
• Automatic Refill of Liquid Nitrogen
• Integrated Purge Gas Generator
• Cabinet Air-Conditioning for High Ambient
Temperatures
• Gas Removal with Condensate Reservoir
• Integration of Sampling Systems
• Automated Linearity Check
Technical Data
Dimensions:
900 x 600 x 1700 mm
Purge Gas:
Nitrogen 5.0 or Treated Compressed Air
Analyzers:FTIR, NDIR, PMA, FID, CLD, TDLS etc.
Compressed Air Supply:
5 bar, Dry and Oil-Free
Power Supply:
400 V / 16 A CEE
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
11
NMS
NH3 Analyzing system
Service:
Another important thing to mention is the maintenance
friendliness of our products. Annual maintenance can be easily
done by the user and wear parts are available for very reasonable
prices.
Analyzing Systems
Advantages
+ High Accuracy
+ Easy Setup
+ Low Maintenance
+ Compact Design
+ Simple Operation
+ IAG Filter Chamber
Options
Simple Touchscreen
Operation
• SilcoTek Surface Treatment
• Gas Connections According Customers Specs
Technical Data
The IAG NMS measuring system is a 191 °C heated
extractive diode laser ammonia detection system.
This very compact and light system can be used in a wide variety
of applications.
Two sample gas inlets, two analogue output instrument, a built-in gas
inlet pressure regulator, a heated sample gas filter, an integrated purge
function, a span gas connection and any kind of communication
option you might eventually like are basic technical features.
Operation:
Setup and operation are kept as simple as possible without sparing
an operation software with all functions the advanced user would
expect, including alarm parameterisation, calibration as well as open
communication settings.
The operation takes place via touchscreen directly at the device or
via communication interfaces such as AK, RS232, Modbus or Profibus.
Reponse Time:
Analyzing components like NH3, which are very difficult to detect,
require measuring systems that provide optimal response times.
IAG has been developing heated pre-filters since 1998 and has
worked ever since to create sampling modules and measuring
systems with minimum internal volume, optimized gas flow,
uniform heating and special surface treatment. Therefore, this
system has the ability of realizing very short response times.
12
Dimensions:
530 x 350 x 340 mm
Weight:
20 kg
Sample Gas Connections:
Swagelok 6 mm
Heated Line Connections:
2 x Binder 693
Purge Gas Connection:
Swagelok 6 mm
Adjustable Sample Flow:
10 l/Min
Filter Cartridge:
70 cm2 PTFE Bond Glass
Laser Path Length:
400 mm
Measuring Range:
0-2000 ppm
Sampling Rate:
1 Hz
Detection Limit:
0,8 ppm
Accuracy: 2 % of the measured value
Drift: 1 % p. 8 h, 2 % p. week
Repeatability: 0,5 %
Inlet Pressure:
0-3 bar rel.
Power Supply:
115 VAC 60 Hz / 230 VAC 50 Hz
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
Ing. Gert Kain, MBA
Division Manager
”You and we are working today.
Together we are planning for tomorrow“
Focusing on Exhaust Analyzis
The successful use of an exhaust analyzing system consists of many parameters, including precise and secure measurements, easy handling
and fast response time in both measurements and after sales service. We supply all components as one single source and adapt solutions
to your individual demands. The further development of the units is based on the change of your requirements.
13
VFS
Sample filter
Advantages
+ Extremely Compact
+ 1 to 6 Sample Gas Inlets
+ Up to 6 Bar Inlet Pressure
+ Integrated Pressure Regulator
+ Filter Flushing with Purge Air Outlet
+ Calibration Gas Feed
+ Control of 6 Heated Lines
+ Backflush Function
+ IAG Filter Chamber
Options
Pre-Filters / Pressure Controllers
•
•
•
•
•
•
•
•
The VFS family with 1 until 24 sample gas inlets are the
allrounders in pre-filter system.
The VFS is an extremely compact, autonomous multi sample filter
for flexible construction of a wide range of test set-ups. Connection
to the VFS is simplified by a control unit that is integrated into the
device and carries out all internal control and regulation tasks as
well as communication with the test cell environment. For this
reason the VFS is ideal as a replacement for older, maintenanceheavy pre-filter modules. Thanks to its versatility, it can be added to
the test cell with limited modification work. - An investment that
quickly pays for itself. The VFS has extremely uniform heating and
an optimized gas feed that guarantees the greatest precision with
measurement results.
The VFS is fitted with an NC pressure regulator for max. 50 mbar
outlet pressure with an inlet pressure of up to 6 bar. Furthermore
the device has a backflushable filter chamber with an inbuilt purge
air outlet plus a test gas inlet. All inbound sample gas lines can be
separately backwashed.
Control of 1 Sample Gas Pump
Control of Heated/Cooled Lines
Pt100 Heat Regulator
Heating Control via Modbus TCP
Bit Parallel Control
AK Control
AK Control via IAG AK Converter
SilcoTek Surface Treatment
Technical Data
1/2/4 Inlet Dimensions: 235 x 380 / 405 / 470 x160 mm
6E Dimensions: 245 x 535 x 160 mm
8E or 24E Dimensions: On Request
Sample Gas Connections: Swagelok 8 mm
Heated Line Connections: 693 6+Pe Connectors
Standard Pin Assignment:
1-L, 2-TC+, 5-TC-, 6-N
Communication: Bit Parallel; Modbus TCP; AK;
or via System Control Panel
Compressed Air Connection:
6 mm Push In/Dry and Oil-Free
Compressed Air Supply:
5-6 bar
Power Supply:
400 V / 3,7 kW 3 m / CEE 16 A
Parameterisation is very simple to carry out via an SCP (system
control panel). The SCP autonomously recognizes which device it
is connected to and enables every device parameter to be set via
an extremely clear, self-explanatory display on a 5.7” touch screen.
The SCP is also available as a simple software tool. This means that
the VFS can be connected directly to an internal network and
controlled or configured from any PC. Control can optionally be bit
parallel or via Modbus TCP.
If an VFS is connected to an IAG measuring unit, configuration and
monitoring can be carried out via the measuring unit display.
14
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
VFC
Sample filter
Advantages
+ Up to 6 Bar Inlet Pressure
+ Backflushable
+ Easy to Use
+ Robust Piston Type Regulator
+ Sensitive Pressure Regulation
+ Long Maintenance Intervals
+ Easy Maintenance
Options
Pre-Filters / Pressure Controllers
• Gas Connections according Customer Specs
• Heated Line Controller
• SilcoTek Surface Treatment
Technical Data
Dimensions: 200x210x110 mm
The VFC is a universally applicable, self-supporting prefilter with an integrated pressure regulator and heat
control for a heated line.
Sample Gas Connections: Swagelok 8mm
The VFC is a self-supporting filter/pressure regulator unit that can
be quickly and easily integrated into a test set-up. If an additional
filter element is required or the exhaust gas pressure is too great,
the VFC is the ideal device for fast connection because of its
great ease of use and the option of an additional heated line for
added supply. The VFC can be supplied with an alarm output for
temperature monitoring on the control centre.
Inlet Temperature: max. 200 °C
The backflushable ‘Normally Open’ pressure regulator reduces inlet
pressures of up to 6 bar to an outlet pressure of max. 250 mbar.
Naturally any IAG filter cartridge can be fitted to the VFC.
Sample Inlet Pressure:
max. 6 bar
Output Pressure: max. 250 mbar
Filter Element: A=70 cm2, Backwashable
Heated Line Connection: 693 6+Pe Connector
Standard Pin Assignment: 1-L,2-TC+,5-TC-,6-N
Alarm Output: 711 Flange Socket Connector
Pin Assignment:
1 - Internal Heating (NO)
2 - Heating Line (NO)
3 - COM
Power Supply: 230V/2,3kW, 1,5m/Schuko
All IAG devices can be supplied with pin assignment, gas connectors
and temperature sensor type according to customer requirements.
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
15
VFD
Sample filter
Advantages
+ Up to 6 Bar Inlet Pressure
+ Backflushable
+ Robust Piston-Type Regulator
+ Sensitive Pressure Rregulation
+ Long Maintenance Intervals
+ Easy Maintenance
Options
• Gas Connections according Customer Specs
• Pt100 Temperature Sensor
• SilcoTek Surface Treatment
Pre-Filters / Pressure Controllers
Technical Data
Dimensions: 170 x 150 x 115 mm
Sample Gas Connections: Swagelok 8 mm
The VFD is a compact pre-filter including integrated
pressure regulator but without built-in heat control. The VFD
can be operated using any common heat controller, or it can
be integrated in an IAG measuring unit.
The VFD is a compact filter pressure regulator, offering an
alternative to an LFD line filter with pressure regulator. Lacking a
heat control of its own, it is particularly suitable for integration in
existing systems, with parameterization and monitoring being
performed via the control system.
Sample Inlet Pressure:
max. 6 bar
Output Pressure: max. 250 mbar
Inlet Temperature: max. 200 °C
Filter Element: A=70 cm2, Backwashable
Power Supply: 230V / 125 W 693 6+Pe / 600 mm
Standard Pin Assignment: 1-L, 2-TC+, 5-TC-, 6-N
The backflushable NO pressure regulator reduces inlet pressures of
up to 6 bar to an outlet pressure of max. 250 mbar. Naturally any
IAG filter cartridge can be fitted to the VFD. All IAG devices can be
supplied with pin assignment, gas connectors and temperature
sensor type according to customer requirements.
Pressure Characteristics:
16
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
LFD
Line filter
Advantages
+ Easy Filter Changing
+ Integrated Pressure Regulator
+ Backflushable
+ Robust
+ Easy Assembly
+ IAG Filter Chamber
Options
The LFD is a compact, backflushable line filter with an
integrated pressure regulator. Because the heated line fitting
is decoupled from the housing, the filter can be changed
without closing off the heating lines.
The LFD is a compact line filter with a filter fitting that is decoupled
from the housing and a backflushable exhaust gas pressure regulator.
It can optionally be supplied as an NO pressure regulator, reducing
inlet pressures of up to 6 bar to an outlet pressure of max. 250 mbar;
or as an NC pressure regulator that remains closed until a vacuum of
-70 mbar relative pressure is applied on the sample gas outlet.
During measurement the vacuum controller adjusts inlet pressures
of up to 6 bar to max. 50 mbar on the outlet. The LFD can be coupled
to an extremely compact sampling unit using an HKL (heated/
cooled line), enabling samples to be taken in a range of 50-650°C
and 0-6 bar. With all IAG pre-filters, great value is placed on the
highest measuring accuracy and quality. This means lasting,
complete gas-tightness and compact, careful construction.
Gas Connections according Customer Specs
NO or NC Pressure Regulator
Pt100 Temperature Sensor
SilcoTek Surface Treatment
Pre-Filters / Pressure Controllers
•
•
•
•
Technical Data
Dimensions: 200 x 120 x 110 mm
Sample Gas Connections: Swagelok 8 mm
Sample Inlet Pressure:
max. 6 bar
NO Output Pressure: max. 250 mbar
NC Output Pressure: max. 50 mbar
Inlet Temperature:
max. 200 °C
Filter Element: A=70 cm2, Backwashable
Power Supply: 230 V / 200 W 693 6+Pe / 600 mm
Standard Pin Assignment: 1-L, 2-TC+, 5-TC-, 6-N
The filter chamber has a minimum dead volume and an extremely
uniform heating system with a short warm-up time, and can
accept all IAG filter elements. Heat can be regulated using any current
temperature regulator.
As with every IAG device, the pin assignment and type of temperature
sensor can be supplied according to the customer’s wishes.
Pressure Characteristics:
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
17
ADR02
Exhaust gas pressure Regulator
Pre-Filters / Pressure Controllers
Without
Cover
The ADR02 is a compact, extremely robust exhaust gas
pressure regulator, for use wherever accurate pressure
regulation and durability are required.
The ADR02 is a versatile pressure regulator that can be customized
to your requirements. The scope of application extends from an
unheated device with no housing (e.g. for EGR measurements)
to a continuously heated, fully enclosed module for e.g. pre-cat
measurements with particle load. The ADR02 can optionally be
supplied as an NO pressure regulator, reducing inlet pressures of
up to 6 bar to an outlet pressure of max. 250 mbar; or as an NC
pressure regulator that remains closed to max. 3 bar inlet pressure
until a vacuum of -70 mbar relative pressure is applied on the
sample gas outlet (e.g. when the measuring device begins to pull).
During measurement the vacuum controller adjusts inlet pressures
of up to 6 bar to max. 50 mbar on the outlet. The conversion process
from overpressure to vacuum controller and back can be carried
out by the user in just a few minutes.
External heating control can be carried out using any current
temperature regulator. All IAG devices can be fitted with pin
assignment, gas connectors and temperature sensor type
according to customer requirements. And finally, fast availability and
attractive prices for replacement parts make a valuable contribution
to the quality and efficiency of your test cell operation.
Advantages
+ Up to 6 bar Inlet Pressure
+ Optional NO or NC Pressure Regulator
+ Sensitive Pressure Regulation
+ Long Maintenance Intervals
+ Easy Maintenance
+ Robust Construction
+ Compact
Options
•
•
•
•
•
•
NO or NC versions
Gas Connections according Customer Specs
Heated Version
Pt100 Temperature Sensor
Powder-Coated Housing
SilcoTek Surface Treatment
Technical Data
Dimensions without Housing: 92 x 92 x 80 mm
Dimensions with Housing: 150 x 160 x 104 mm
Sample Gas Connections: Swagelok 8 mm
18
Sample Inlet Pressure:
max. 6 bar
NO Output Pressure: max. 250 mbar
NC Output Pressure: max. 50 mbar
Inlet Temperature:
max. 200 °C
Power Supply: 230 V / 125 W 693 6+Pe / 600 mm
Standard Pin Assignment: 1-L, 2-TC+, 5-TC-, 6-N
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
VFE
Sample filter
Advantages
+ Maintenance Free
+ Versatile
+ Robust
+ Compact
+ Low Price
+ IAG Filter Chamber
Options
• Gas Connections according Customers Specs
• Pt100 Temperature Sensor
• SilcoTek Surface Treatment
Technical Data
The VFE is a low-cost pre-filter with all the benefits of IAG filter
technology.
Dimensions: 150 x 145 x 105 mm
Sample Gas Connections: Swagelok 8 mm
The VFE is a compact, heated pre-filter offering the ultimate in
measurement accuracy and user-friendliness. This means lasting,
complete gas-tightness, careful gas flow and compact, careful
construction.
Filter Element: A=70 cm2, Backwashable
Power Supply: 230 V / 125 W 693 6+Pe / 600 mm
Standard Pin Assignment: 1-L, 2-TC+, 5-TC-, 6-N
Pre-Filters
The filter chamber has a minimum dead volume and extremely
uniform heating with a fast heating-up time, and can accept any
IAG filter element. The forward-facing filter fitting seal makes it quick
and easy to replace filter elements. Heat can be regulated using any
current temperature regulator.
As with every IAG device, the pin assignment and type of temperature
sensor can be supplied according to the customer’s wishes.
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
19
VFH
Pre-filter heated line
Advantages
+ Maintenance-Free
+ IAG Filter Chamber
+ Integrated Heat Control
+ Durable
+ Low Price
Options
•
•
•
•
Alarm Output
Gas Connections according Customers Specs
Pt100 Temperature Sensor
SilcoTek Surface Treatment
Technical Data
Dimensions: 225 x 170 x 115 mm
Sample Gas Connections: Swagelok 8 mm
The VFH is a compact, heated pre-filter offering the ultimate
in measurement precision and user-friendliness. This means
lasting, complete gas-tightness, careful gas flow and
compact, careful construction.
Pre-Filters
The filter chamber has a minimum dead volume and extremely
uniform heating with a fast heating-up time, and can accept any
IAG filter element. The forward-facing filter fitting seal makes it
quick and easy to replace filter elements.
Filter Element: A=70 cm2, Backwashable
Heated Line Connection: 693 6+Pe Connectors
Standard Pin Assignment: 1-L, 2-TC+, 5-TC-, 6-N
Alarm Output: 711 Flange Socket Connector
Pin Assignment: Pin 1 - Internal Heating (NO)
Pin 2 - Heating Line (NO)
Pin 3 - COM
Power Supply: 230 V / 2,3 kW, 1,5 m / Schuko
The heat level is controlled by means of 2 heat controllers with
settings made on the front panel. The VFH can optionally be
supplied with an alarm output for parameter monitoring.
20
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
LFS
Heated line filter
Advantages
+ Low Price
+ Maintenance-Free
+ Robust
+ Easy Assembly
+ IAG Filter Chamber
Options
•
•
•
•
Gas Sonnections according Customer Specs
High-Temperature Sampling
Pt100 Temperature Sensor
SilcoTek Surface Treatment
Technical Data
The LFS is a compact line filter where it is possible for to change
the filter without closing off the heated lines. With all IAG pre-filters,
great value is placed on the highest measuring accuracy and quality.
This means lasting, complete gas-tightness and compact, careful
construction. The filter chamber has a minimum dead volume and an
extremely uniform heating system with a short warm-up time, and
can accept all IAG filter elements.
Dimensions: 200 x 120 x 110 mm
Sample Gas Inlet: 8 mm Stainless Tube
Sample Gas Connections: Swagelok 8 mm
Sample Inlet Temperature: max. 200 °C
Filter Element: A=70cm2, Backwashable
Power Supply: 230 V / 200 W 693 6+Pe / 600 mm
Standard Pin Assignment: 1-L, 2-TC+, 5-TC-, 6-N
Pre-Filters
The LFS is a compact, heated line filter where, thanks to a
filter fitting that is decoupled from the housing, it is possible
to change the filter without closing off the heated lines.
The filter fitting is decoupled from the housing and sealed on the
front face, enabling the filter to be changed quickly and easily. For
high-temperature sampling, the LFS is equipped with a 300 mm
stainless steel corrugated hose on the inlet side. Heat can be regulated
using any current temperature regulator.
As with every IAG device, the pin assignment and type of temperature
sensor can be supplied according to the customer’s wishes.
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
21
Filter
filter cartridge options
Technical Data
PTFE Compound Ceramic Filters:
E-FP-CS Deposition: 99.00% Particles and Aerosols >0.01μm
E-FP-DS Deposition: 93.00% Particles and Aerosols >0.01μm
E-FP-BS Deposition: 99.99% Particles and Aerosols >0.01μm
Stainless Steel Meshwork Filters:
E-FP-EM-F2 Deposition: 2 μm Particles
E-FP-EM-F5 Deposition: 5 μm Particles
E-FP-EM-F10 Deposition: 10 μm Particles
Overview of the IAG filter cartridge range.
Our wide range of filter cartridges enables individual selection of
the optimum filter material and appropriate deposition rate for any
situation.
Stainless Steel Sinter Filters:
E-FP-ES-F3 Deposition:
96 % Partikel > 0.2 μm
E-FP-ES-F8 Deposition:
96 % Partikel > 0.04 μm
All IAG filters offer the highest quality at an attractive price: once
again we guarantee the highest accuracy for your measurements
for a constantly low cost.
All IAG filters have a filter surface of 70 cm2 and can be installed in
any IAG filter chamber.
Pre-Filters
22
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
Ing. Michael Waitz
Software Development and Electrical Design Department Manager
”Every client is different.
That is our challenge.“
We are inspired by your individual needs
Easy operation and easy maintenance as well as compact design are the characteristics that distinguish our measuring systems.
Small dimensions, light weight and practical form are essential details with regard to the suitability for everyday application. Individuality
motivates us. Besides standards, we realize various features according to your individual needs. Tailor-made solutions are our standard and
we look forward to listening to your needs.
23
FLS
FTIR sampling system
Advantages
+ Improved Safety
+ Easy Setup
+ Low Maintenance
+ Compact Design
+ Simple Operation
Technical Data
Dimensions: 300x460x490 mm
Weight: 20kg
Sample Gas Connections: Swagelok ¼”
Heated Line Connections: 2x Binder 693
Purge Gas Connection: CPI Quick Connect
Temperature Range: 5-200°C
Adjustable Sample Flow: 2-10l/Min
Filter Element: A=70 cm2
Power Supply: 115VAC 60Hz / 230VAC 50Hz
The IAG FLS is the ideal additional device to your FTIR to
turn it into a complete, simple and safe working measuring
build-up.
The IAG FLS were designed as additional devices for the simple
and safe operation of FTIR analyzers. They provide a fully
heated, filtered and adjustable sample gas flow through the
analyzer, provided by a reliable heated sample gas pump. Setup is very simple and can be carried out in just a few minutes.
Gas Feed
It only needs the connection of two heated lines, one to the
FTIR and one to the sampling point, network connection,
power and purge gas connections. Operation can be done on
the device via pushbuttons, or via the provided software which
also shows all important FTIR and FLS parameters such as
sample flow, gas cell pressure and system temperatures.
Before and after measuring the device automatically starts
purging the analyzer with nitrogen which will help to avoid
costly mishaps such as corrosive probes condensing inside
the gas cell. To achieve optimum measuring accuracy all gas
contacted surfaces are stainless steel or PTFE with a uniform
heating and minimised internal volume.
24
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
MSJ
Gas line switch
Advantages
+ Long Life
+ Compact
+ Backflushable
+ Impervious to Particles
+ Simple Actuation
+ Easy Maintenance
+ Inlet Pressure up to 3 Bar
Options
•
•
•
•
•
•
•
•
•
IAG MSJ gas line switches are impressive for their extremely
compact design, lasting, complete seal tightness and
maintenance-friendliness.
IAG gas line switches are especially impressive because of their
compactness and long life even under heavy usage conditions. As
with every IAG device, special attention is paid to careful gas flow
with minimal internal volume and no stub lines or undercutting,
as well as uniform heating with ample performance for heating up
quickly. The MSJs have an in-built heat regulator for internal heating.
Control of the compressed-air balanced valve is bit parallel with 24V
control voltage. The maximum line diameter for gas inlets for the
MSJ 12 is 35 mm.
2 Gas Inlets
2 Gas Inlets and 2 Heating Circuits
4 Gas Inlets
8 Gas Inlets
12 Gas Inlets
Gas Connections according Customer Specs
Inlet Pressure 6 Bar
Modbus RTU / TCP Control
SilcoTek Surface Treatment
Technical Data
Dimensions 2 Inlets: Gas Inlets: Seperately Backflushable
Dimensions 4 Inlets: The MSJ 2,4 and 8 are backflushable. The MSJ 2 can be equipped
with 2 extra heating circuits for oncoming heated lines. Maximum
inlet pressure for all MSJ is 3 bar. All MSJ are available in a high
pressure version for max. 6 bar inlet pressure. If an MSJ is connected
to an IAG measuring unit, control, parameterisation and monitoring
can be carried out via the measuring unit display.
150x390x140 mm
150x300x160 mm 12-inlet
Gas Inlets: Seperately Backflushable
Dimensions 8 Inlets: 150x400x160 mm
Gas Inlets: Seperately Backflushable
Dimensions 12 Inlets: 150x390x140 mm
Gas Inlets: Backflushable from Emission Bench
Inlet Pressure Standard: max. 3 bar
Heated Valveblock: max. 200°C
Gas Feed
Sample Gas Connections: Swagelok 8mm
Control Connector: Sub D-15pin
Pin Assignment: 1-12 Gas, Inlets/13
Com/14, 15 Alarmrelais
Power Supply: 230V/250W IEC
Compressed Air: Push in 6 mm, 3-5 bar
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
25
MGK
Compressor Sample Gas Cooler
Advantages
+ Compact Dimensions
+High Cooling Power
+ Stainless Steel Heat Exchanger
+ Status Indicatore
Options
• Dewpoint Sensor with Alarm Setting
Technical Data
IAG MGK Compressor Sample Gas Cooler.
The IAG MGK Sample Gas Cooler is a highly compact device,
measuring 3HE high and 400 mm deep, but also considering that
as a compressor cooler unit it provides adequate power even at high
ambient temperatures.
All electrical and gas connectors are located on the back of the
instrument, while the control panel and the condensate pump are on
the front. In this way the complete system can be clearly structured,
retaining all gas and energy supply connectors on the back of all
units, whereas the status of the gas cooler and the proper functioning
of the condensate pump can be viewed from the front panel.
Dimensions: 19“x3HEx400 mm
Housing: Anodized Aluminium
Weight: 14kg
Sample Gas Connectors: 6 mm Swagelok
Sample Flow Rate: Up to 15 l/Min at 200°C
Temperature Stability: +/- 0,3°C
Cooling Power: ~200 W
Condensate Outlet: 6 mm Swagelok
Alarm Output: Binder 711
Power Supply: 230V/500 W
Power Supply Connection: IEC Power Socket
Gas Feed
26
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
HSV
UREA DISTRIBUTION Analyzing System
Automatic calculation of the dot matrix:
NOx uniform distribution:
Application:
The HSV can be connected to round exhaust systems with a
diameter of 8 to 14“. The connection is made with a welded flange
plate. The sampling system can be positioned and fastened on the
flange through a mobile, height and inclination adjustable carrier
trolley. The connection point centre height can be electronically
adjusted from 500 to 1000 mm. The positioning unit can be pivoted
in the range +/-30° around the vertical in order to enable a coupling
to the welding flange in this angular range.
Implementation:
The pipe probe is positioned in the exhaust system via coupled
linear drives, which run into pre-parameterized positions in the
exhaust system. The probe pipe is heated to 191 °C and has a 6 mm
Swagelok connection for a heated analytical line (for analysis) on the
output side. In addition, it has a pressure connection for dynamic
pressure measurement to determine the flow velocity as well as a
thermocouple for temperature measurement at the sampling point.
Operation:
The operation, monitoring and parametrisation of the system can be
carried out directly on the system using the touch display or via the
fully configurable AK interface.
Advantages
Gas Feed
The IAG HSV is a heated gas sampling system for analyzing
the distribution of gas concentrations as well as the flow
velocity and exhaust gas temperature via the cross-section
of exhaust systems by means of an automatically positioned
pipe probe.
+ Gas-tight Design
+ Minimal Disturbance of Gas Flow
+Easy Integration into Existing Exhaust Systems
+ Easy Operation
+ Mobile on 4 Swivel Castors
Technical Data
Dimensions:
800 x 1200 x 1500 mm
Weight:
approx. 185 kg
Exhaust Gas Temperature:
up to 450 °C
Power Supply:
230 V / 50 Hz, Schuko / 10 m
Gas Connection: Swagelok 6 mm
Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · IAG - Industrie Automatisierungsgesellschaft m.b.H
27
Stefan Handler
Sales and Customer Service Manager
”It is the start that counts, but secure
day-to-day operations are key.“
Our service doesn´t stop after the delivery
Our routes are as short as they are feasible in both inside our analyzing systems and in after sales service. You are welcome to talk to the
technicians directly, who know your units. The results are fast advice and rapid spare part delivery. The basics include individual service
contracts from simple maintenance to all-inclusive-packages. The heart of your unit, the spectrometer, is in the best hands as well:
We are a certified premium partner of MKS Instruments.
TRE08
Temperature controller
Advantages
+ High-Performance Temperature Controller for
8 Control Circuits
+ Max. 4 x 3 A + 4 x 15 A
Options
The TRE08 is a high-performance temperature ontroller
for supplying long heated hoses for extensive multiple
samples or even precise monitoring of multiple control
circuits.
The TRE08 is far more than just a temperature controller. This is partly
because of its enormous performance capability – up to 63A total
power consumption on 8 control circuits – and partly because of its
versatility in terms of control tasks and communications options. The
8 PID control circuit can safely and precisely manage heated lines,
heated/cooled lines, heated sample gas pumps or whatever else
is required. Even special tasks such as fast adjustments, parameter
switching etc can be carried out using the TRE08.
Like all IAG modules, the TRE08 can also be controlled and configured
in a wide variety of ways. If active control is needed (such as for
controlling an HKL), this can be done either via bit parallel or via
Modbus TCP. Depending on the configuration, the TRE08 has up to 8
freely programmable digital outputs that can be used for controlling
an MSJ junction unit, for example.
8 Control Circuits max. 4 x 3 A + 4 x 15 A
Control of Heated/Cooled Lines
Control of Sample Gas Pumps
Bit Parallel Control
Control of an IAG MSJ
Pt100 Temperature Sensor
Technical Data
Temperature Controller: PID Controller, 8 Control Circuits
Parameterisation: Via Modbus TCP or via
System Control Panel (SCP)
Control: Modbus TCP, AK TCP, Digital Input via Sub-D or System Control Panel (SCP)
Pin Assignment: Pins 1, 2, 3 - Digital in, Pin 6 - Com
Alarm Output: Sub-D (9-Pin), Pins 7, 8, 9 - NO/NC
3A Heat Supply: 693 6+Pe Flange Socket Connector
Standard Pin Assignment: 1-L, 2-TC+, 5-TC-, 6-N
15A Heat Supply: 694 4+Pe Flange Socket Connector
Standard Pin Assignment: 1-L, 2-N, 3-TC+, 4-TCMSJ
Control: Sub-D (15-Pin)
Dimensions: 320 x 400 x 170 mm
Power Supply: 400 V / 32 A or 63 A CEE, 3 m / Schuko
Test Cell Equipment
If the TRE08 is connected to an IAG measuring unit, it will be
displayed in the measuring units display and can be fully monitored
and configured from there. In the simplest case, the TRE08 can
carry out its control functions fully autonomously and can display any
interference as a digital signal. Parameterisation is then carried out
either via a system control panel (SCP) or with an extremely handy
configuration software package via Modbus TCP.
•
•
•
•
•
•
Find our other basic temperature
controller TRE01 and TRE05 on
our homepage www.iag.at
29
TRE01
TRE05
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
MTS
Driver guidance system
Advantages
+ Central Mounting Point
+ Extensive Range
+ Elegant Design
+ One-Hand Operation
+ Maintenance-Free
Options
•
•
•
•
•
•
•
•
Heated Version (up to -30 °C/-22°F)
Aircondition (up to 50°C/122°F)
2 CAT5 Ports
8 BNC Ports
1 PG for Cable Outlet
1 Two-Pin Grounded Socket
1 12 V Socket
1 Mushroom-Style Emergency Stop Switch
Technical Data
The MTS is an extremely elegant and versatile driver aid/
guidance system that is also suited for use in climatic test
benches.
Thanks to the compact design featuring a central pillar to the
ceiling, the MTS has an extremely slim and elegant appearance
and requires only one mounting point, making attachment to
the test bench much easier than with conventional rail systems.
All lines are well protected, running inside and concealed from
view. Despite its slim appearance, the MTS is stable enough
to easily withstand even high winds. All main axes of movement are unlocked simultaneously, allowing the system to be
positioned effortlessly with just one hand.
Movement Radius:
2m
Minimum Ceiling Height: 3.2 m
Monitor: 22” TFT
Compressed Air Supply: 6-8 bar, Dry and Oil-Free
Power Supply Connection:Two-Pin Grounded
Power Supply: 230 V / 2.3 kW
Monitor Signal: CAT5 max. 100 m
with Signal Amplifier to VGA
Test Cell Equipment
The monitor is mounted in a durable, heatable case featuring
handles for positioning as well as operator controls and signal
transfer interface, all of which are arranged ideally to facilitate
work. Thanks to tremendous ease of operation and its elegant
appearance, the MTS driver aid system will contribute
appreciably to enhancing the working climate at your test
benches.
30
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf · T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected]
Ing. Rainer Pokorny
Technical Manager
”It starts with listening. It ends with
the most suitable solution.“
Understanding your needs
Our customers know what they want. Our challenge starts where conventional exhaust gas measurement reaches its limits - high
temperatures, high pressures, long gas lines, difficult sampling points, short response times and free choice of analyzers. Our customers‘
individual requirements drive us to create new unique products we are truly proud of.
31
IAG - Industrie Automatisierungsgesellschaft m.b.H
IAG - Industrie Automatisierungsgesellschaft m.b.H · Industriestraße 2 · 2722 Weikersdorf
T +43 2622 21734/77 · F +43 2622 21734/85 · E [email protected] · www.iag.at