DOWNLIGHTS
RUNI – Universal Recessed PL Downlight (Lamps not included)
145
Ø230
RUNI218-01
RUNI226-01
RUNI218E-01
RUNI226E-01
Diameter (mm):
Depth (mm):
Cut-out (mm):
Power Consumption(W):
Power Factor:
Light Output (Lm):
Illuminance (lux):
Beam Angle (o):
Ambient operating temperature ( 0C):
Weight (Kg):
Cap Type:
IP:
Guarantee (Yrs):
2
2
Emergency 2
Emergency 2
x
x
x
x
18W
26W
18W
26W
230
145
205
36/52
>0.95
1032/1512
446/648
80
-10 < Ta < 35
Std – 1.36/Em – 2.89
18W - G24Q2 / 26W - G24Q3
20 (IP65 accessory available)
2
This great universal twin lamp PL down light is suitable for installation in many commercial or retail areas which, with the optional
combinations of dropped and/or frosted glass, allows one fitting to be utilised in many areas of a building and provides an alternative to
traditional square fluorescent lay-in modules. It utilises the latest electronic ballast technology to provide an energy efficient lighting solution.
These fittings are suitable for application in:
● Shops
● Wet areas
● Lobby’s
● “Back of house” areas
●
●
Canteens
Nursing homes
●
●
Corridors
Offices
●
●
Common rooms
Apartment communal areas
FEATURES
BENEFITS

Available in:
2 x 18W, and 2 x 26W versions

Provides a choice of wattages to enable bespoke lighting designs to be achieved

Maintained emergency options with 4.8v 4Ahr
NiCad rechargeable batteries and LED charging
indicator


Provides safe exit lighting for 3-Hour emergency operation
Can be used in maintained or non-maintained modes

High grade polished reflector design


Ensures maximum light is emitted
Provides uniform light pattern with no dark spots or shadows

ENEC certified energy efficient Philips high
frequency electronic control gear with:

Warm start

Shut down protection

Integral cable restraint clamp

Wago spring type push-in terminals

Quality control gear for long life providing flicker free starting and complies with
European safety regulations
Warm start enables switching by PIR
Automatically shuts down if electrical short occurs with auto re-start
Helps ensure conductors cannot accidentally be pulled out of terminals
Spring terminals provide fast and simple connection with permanent conductor
pressure to prevent bad connection hot spots




Note: Switching by PIR will result in substantially shorter lamp life

Fitting pre-wired to floating ballast


Reduces on site wiring to provide faster electrical installation
Fitting is lighter so ceiling is less stressed

Pre-wired male with first fix female connector on
non-emergency


First fix female connector for testing
Quick & easy to connect fitting after decoration

ABS body


Strong, durable, impact and vandal resistant
UV stabilised so will not degrade

Fast fix ceiling fixing lugs


Time saving fitting installation
One man operation

Twist lock plain glass alloy trim as standard

Easy lamp change (no tools required)

Available Accessories

RUNI265

RUNI2F

RUNI2DGL

RUNI2DGLF

RUNICBL






Comprehensive range of accessories makes fitting suitable for all areas
IP65 bezel suitable for use outdoors or wet in areas
Part frosted to prevent glare
Dropped standard glass accessory maximises lumen output with good aesthetics
Dropped frosted edge glass accessory helps reduce glare with good aesthetics
Cat 2 low glare cross blades

2 year no quibble guarantee

Provides confidence that the product is of high quality and will give a long and
efficient life
PLEASE NOTE – INFORMATION CONTAINED IN THIS DOCUMENT MAY BE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE
Western Retail Park
Nangor Road
Dublin 12
Ireland
Tel +353 1 709 9000
Fax +353 1 709 9060
Email [email protected]
www.ledgrouprobus.com
www.robusdirect.com