Half-height sensor barriers and Revolving doors
design variety in foyer and facade
Contents
Argus HSB4
Talos RDR26
HSB-E106
HSB-E11 16
RDR-E01 HSB-E02 HSB-E07 18
RDR-C0130
HSB-E0820
RDR-S0132
HSB-S05 RDR-C0334
8
HSB-E0412
24
RDR-C02 28
36
3
Argus HSB sensor barriers
Range of use
• Office and
administrative buildings
• Ministries
• Industrial installations
• Banks and
financial institutions
• Airports
4
The units with security level 0 (-E10 / -E11) are
the simplest HSB types with a low level of single
passage regulation in both directions (passage
of two persons at a distance of >300 mm), a reasonable solution to assist well supervised foyers
with a lower level of single passage regulation.
The glass line (-E11 / -E07 / -E08) is designed
for customers who require optimum transparency and slender space-saving shape.
The stainless steel line (-E10 / -E02 / -E04)
is used for installation situations with desired
high-quality stainless steel housing or e.g. big
card readers or other components to be instalThe types (-E02 / -E07) with security level 1 of- led in the base columns. These HSB units offer
fer a high level of single passage regulation in optimum space for components provided by the
both directions. A person can be detected even customer.
following another person at a distance of > 100
mm. Attempts to pass in the wrong direction can Type -S05 represents the high-quality design
be recognized considerably earlier and the door variant of security level 2, which is implemented
leaves can thus be closed before activation of where, in addition to transparency and slender
shape, a clear geometrical design is desired. The
the protective device.
sensor system is integrated in the guiding elements covered by translucent glass panels and
The types (-E04 / -E08 / -S05) with security infrared transmissible segments.
level 2 offer a high level of single passage regulation in both directions (following at an interval
of > 100 mm) and an additional protection device
underneath the door leaves. These units are implemented where children or persons with trolleys pass. Entry from below is not possible.
Argus HSB features
Distinctive characteristics of Argus HSB
• High personal safety and comfort for the
users; support of supervisory staff
• Door leaves open under load
• Three security levels for single passage regulation in both directions
• Applicable for emergency escape routes with
corresponding accessories added
• Convenient, contactless passage also with
bags and luggage
• Low-energy drive = maximum energy at the
door leaf < 1,6 Joule (personal safety)
• The door leaves close automatically in case
of passage without authorisation or stay
closed respectively.
• Separation of driving and locking forces
• Variety of types and design; big range of
colours, shapes and configurations
• Integrated protection against entry from
below (security level 2)
• Argus glass line characterised by optimum
transparency combined with filigree stainless steel
• Identification of trolleys (security level 2)
• Door leaves lockable in any position
• High throughput rate (up to 30 persons/min)
• Detection of children (security level 2)
• Argus stainless steel line characterised by a
high-quality stainless steel housing in modular construction
• Ergonomically designed solutions also for
persons with reduced mobility
• Modular systems
5
Argus HSB-E10
here shown with
HSD-E03 half-height swing doors
PGB-S01 pedestrian guiding bars with
corner post 90°
Materials
Sensor barriers with door leaves made of transparent
polycarbonate.
Swing doors and pedestrian guiding bars with 10 mm
tempered safety glass.
All units are made of stainless steel AISI 304 satin finish.
Top edge of door leaves and personal guiding bars uniformly 900 mm.
Revolving doors RDR and metal door elements MDE are
shown in the facade
6
1000
HSB-E10 (security level 0)
1470
1000
6500
650
1500
1100
1900
870
7
Argus HSB-E02
1760
6500
HSB-E02 (security level 1)
here shown with
HSD-E03 half-height swing doors
PGB-S01 pedestrian guiding bars
Materials
Sensor barriers with door leaves made of transparent
polycarbonate.
Swing doors and pedestrian guiding bars with 10 mm
tempered safety glass.
All units are made of stainless steel AISI 304 satin finish.
Top edge of door leaves and personal guiding bars uniformly 900 mm.
Revolving doors RDR and metal door elements MDE are
shown in the facade
8
1200
1400
650
1400
1000
1900
870
9
Argus HSB-E02
1760
6500
Variant of HSB-E02
(further options possible)
1300
1300
900
650
1300
870
2150
• Sensor barrier with closed base (e.g. as cable duct)
• Passage width increased to 900 mm (for persons
with reduced mobility and transit of goods, security
level not applicable )
• Emergency and escape route equipment
for sensor barriers and swing doors
10
1900
870
11
Argus HSB-E04
2050
6500
HSB-E04 (security level 2)
here shown with
HSD-E03 half-height swing doors
PGB-S01 pedestrian guiding bars
Materials
Sensor barriers with door leaves made of transparent
polycarbonate.
Swing doors and pedestrian guiding bars with 10 mm
tempered safety glass.
All units are made of stainless steel AISI 304 satin finish.
Top edge of door leaves and personal guiding bars uniformly 900 mm.
Revolving doors RDR and metal door elements MDE are
shown in the facade
12
1200
1400
650
1400
1000
1900
870
13
Argus HSB-E04
650
2050
1000
6500
1000
Variant of HSB-E04
(further options possible)
1900
• Horizontal, elliptic base columns instead of slant
and rounded
• Housing with wood cover plate
14
870
15
Argus HSB-E11
1290
6500
HSB-E11 (security level 0)
here shown with
HSD-E03 half-height swing doors
PGB-S01 pedestrian guiding bars
Materials
Sensor barriers with door leaves made of transparent
polycarbonate.
Swing doors and pedestrian guiding bars with 10 mm
tempered safety glass.
All units are made of stainless steel AISI 304 satin finish.
Top edge of door leaves and personal guiding bars uniformly 900 mm.
Revolving doors RDR and metal door elements MDE are
shown in the facade
16
1300
1300
650
1400
870
2010
870
17
Argus HSB-E07
650
1000
1660
1000
6500
HSB-E07 (security level 1)
here shown with
HSD-E03 half-height swing doors
PGB-S01 pedestrian guiding bars with corner post 90°
Materials
Sensor barriers with door leaves made of transparent
polycarbonate.
Swing doors and pedestrian guiding bars with 10 mm
tempered safety glass.
All units are made of stainless steel AISI 304 satin finish.
Top edge of door leaves and personal guiding bars uniformly 900 mm.
Revolving doors RDR and metal door elements MDE are
shown in the facade
18
1400
870
2010
870
19
Argus HSB-E08
650
2010
1000
6500
870
HSB-E08 (security level 2)
here shown with
HSD-E03 half-height swing doors
PGB-S01 pedestrian guiding bars
Materials
Sensor barriers with door leaves made of transparent
polycarbonate.
Swing doors and pedestrian guiding bars with 10 mm
tempered safety glass.
All units are made of stainless steel AISI 304 satin finish.
Top edge of door leaves and personal guiding bars uniformly 900 mm.
Revolving doors RDR and metal door elements MDE are
shown in the facade
20
2010
870
21
Argus HSB-E08
Variant of HSB-E08
(further options possible)
• Guiding tubes; stainless steel tubes in Ø 140 mm
instead of Ø 60 mm (e.g. for installation of components provided by customer)
• Signal device LED arrow-cross
• Preparation for mounting with plate for surface installation of components provided by the customer
(e.g. card reader)
• Passage width increased to 900 mm (for persons
with reduced mobility and transit of goods, security
level not applicable )
• Emergency and escape route equipment
for sensor barriers and swing doors
22
1000
900
650
1000
2010
6500
1200
1200
1300
1400
2260
2010
23
Argus HSB-S05
2010
6500
650
HSB-S05 (security level 2)
here shown with
HSD-E03 half-height swing doors
PGB-S01 pedestrian guiding bars
Materials
Sensor barriers with door leaves made of transparent
polycarbonate.
Swing doors and pedestrian guiding bars with 10 mm
tempered safety glass.
All units are made of stainless steel AISI 304 satin
finish. The Optiwhite glass filling of the sensor barriers
is matt finished on one side.
Top edge of door leaves and personal guiding bars
uniformly 900 mm.
Revolving doors RDR and metal door elements MDE
are shown in the facade
24
1300
1300
1400
870
2010
870
25
Talos RDR revolving doors
Range of use
• Office and administrative buildings
• Hotels
• Shopping centres
• Banks and financial institutions
• Airports
• Railway stations
• Hospitals
• Museums
• Concert halls, cinemas
• Universities
• Exibitions
Talos RDR-E01, available in outside diameters from 2100 up to
3700, in case of basic equipment
rotated freely manually, is the
base model of revolving doors
which differs from RDR-C01 by a
limited variety of options.
Talos RDR-C01, available in outside diameters from 2100 up to
3700, in case of basic equipment
rotated freely manually, offers
more options than RDR-E01, e.g.
concerning night slides or finish.
Talos RDR-S01, available in outside diameters from 2100 up
to 3700, in case of basic equipment rotated freely manually, is
constructed with a glass ceiling
and a rotating unit without central
profile and circumferential aluminium profiles T25 (T40 with Ø
3700). An optional speed control
or drive will be installed underfloor or in a floor pit respectively.
26
Talos RDR-C03, available in outside diameters from 2100 up to
3700, drive fully automatic K8-SA1
and rotating unit with emergency
escape function and circumferential aluminium profiles T56 already included in basic equipment.
Start by means of infrared sensors. The unit is provided with
safety strips to prevent harm of
pedestrians.
Talos RDR-C02, availa
ble in outside diameters
from 3920 up to 4920,
servo drive SA3 and ro
tating unit with circum
ferential aluminium profiles T56 already included in basic
equipment.
Start by means of infrared sensors. The unit is provided with safety strips as well as two pre-sensors, installed in ceiling plate to
prevent harm of pedestrians.
Talos RDR features
Distinctive characteristics of Talos RDR
• High quality workmanship (long life cycle)
• Easy procedure of drive installation in upper
part of the body, in a floor pit or subsurface
• Comfortable for pedestrians due to use of
sensors
• Efficient regulation of pedestrian flow
• Creative freedom for architects by large
array of diameters, dimensional variants of
unit bodies, rotating units with three or four
leaves and several kinds of finish
• During the passage minimum two door leaves abut on the unit body (noise abatement)
– certificates available
• During the passage minimum two door leaves abut on the unit body (no air passage)
– certificates available
• Attractive, stylish design; e. g. all-glass or
mirror polished (public face of a building)
• Also available with emergency escape function
• Available as manually rotated door, with
speed control, with positioning drive, with
fully-automatic positioning drive SA2 or SA3,
and also with demand locking for SA1 and
SA2
• Optional with manual or motor-driven night
slides
• Thermal insulation, e.g. thermal separation
of body elements on façade level
• Full functionality ensured in case of high
wind load
• High personal safety by safety strip equipment in standard version
• Various protection classes for burglary and
bullet resistance
• Type-examination tested solutions for installation in emergency escape routes
27
Talos RDR-E01
1760
6500
650
RDR-E01 rotated freely manually
here shown with
metal door elements with two door leaves used as
escape door and for material handling
Materials
Side panels of revolving door with 8 mm laminated
safety glass or metal cladding.
Rotating unit with three or four leaves, tempered safety
glass filling, black U-shaped handles and circumferential
aluminium profiles T40.
Metal door elements made of heat-insulated aluminium
profiles with insulating glass 2 x 6 mm laminated glass.
All visible profiles and claddings are powder-coated or
silver anodized.
HSB-E02 sensor barriers, HSD-E03 swing doors and
PGB-S01 pedestrian guiding bars are shown in the foyer.
28
1900
2100 - 3700
2000 - 2600
29
Talos RDR-C01
RDR-C01 rotated freely manually
here shown with optional motor driven night slides
(with night access via card reader posts) and
metal door elements with two door leaves used as
escape door and for material handling
Materials
Side panels of revolving door with 8 mm laminated
safety glass or metal cladding.
Rotating unit with three or four leaves, tempered safety
glass filling, black U-shaped handles and circumferential
aluminium profiles T40.
Metal door elements made of heat-insulated aluminium
profiles with insulating glass 2 x 6 mm laminated glass.
All visible profiles and claddings are powder-coated or
silver anodized.
HSB-E02 sensor barriers, HSD-E03 swing doors and
PGB-S01 pedestrian guiding bars are shown in the foyer.
30
1760
6500
650
1900
2100 - 3700
2000 - 2600
31
Talos RDR-S01
RDR-C01 rotated freely manually
here shown with glass ceiling without frame (option up to
outside diameter 3300) and metal door elements with two
door leaves used as escape door and for material handling.
Materials
Side panels of revolving door with laminated safety glass
in statically admissible thickness.
Rotating unit with three or four leaves, tempered safety
glass filling, black U-shaped handles and circumferential
aluminium profiles T25 respectively T40 with Ø 3700.
Metal door elements made of heat-insulated aluminium
profiles with insulating glass 2 x 6 mm laminated glass.
All visible profiles and claddings are powder-coated or
silver anodized.
HSB-E02 sensor barriers, HSD-E03 swing doors and PGBS01 pedestrian guiding bars are shown in the foyer.
32
1760
6500
650
1900
2100 - 3700
2000 - 2600
33
Talos RDR-C03
RDR-C03 with drive fully automatic SA1 and rotating
unit with emergency escape function
here shown with metal door elements with two door leaves
used for material handling
Materials and equipment
Side panels of revolving door with 8 mm laminated safety
glass or metal cladding.
Safety strips on opposing closing edges as well as horizontal and vertical at the door leaves.
Rotating unit with three or four leaves, tempered safety
glass filling with optional black U-shaped handles and
circumferential aluminium profiles T56 (door leaves on
centrical bearings). Start by means of infrared sensors.
Metal door elements made of heat-insulated aluminium
profiles with insulating glass 2 x 6 mm laminated glass.
All visible profiles and claddings are powder-coated or
silver anodized.
HSB-E02 sensor barriers, HSD-E03 swing doors and
PGB-S01 pedestrian guiding bars are shown in the foyer.
34
1760
6500
650
1900
2100 - 3700
2000 - 2600
35
Talos RDR-C02
1760
6500
650
RDR-C02 with servo drive SA3 and optional
emergency escape function
Materials and equipment
Side panels of revolving door with 8 mm laminated safety
glass or metal cladding.
Safety strips on opposing closing edges as well as
horizontal and vertical at the door leaves.
Two pre-sensors installed in ceiling plate.
Rotating unit with three or four leaves, tempered safety
glass filling with optional black U-shaped handles and
circumferential aluminium profiles T56 (door leaves on
centrical bearings). Start by means of infrared sensors.
Metal door elements made of heat-insulated aluminium
profiles with insulating glass 2 x 6 mm laminated glass.
All visible profiles and claddings are powder-coated or
silver anodized.
HSB-E02 sensor barriers, HSD-E03 swing doors and
PGB-S01 pedestrian guiding bars are shown in the foyer.
36
1900
3920 - 4920
37
38
39
31436E 09-2011
Kaba Gallenschütz GmbH
Nikolaus-Otto-Strasse 1
77815 Bühl
Germany
Tel.+49 (0) 7223/286-0
Fax+49 (0) 7223/286-111
[email protected]
www.kaba-gallenschuetz.de