-Testing Technology Service Ltd.
Best Quality Control Partner-Inspection, Test, Factory Audit
BOOKING FORM
Add: No#708, Minggong building, Lianhua south road, Siming district, Xiame, Fujian, PRC
Tel:0086-592-5219260; FAX: 0086-592-5219230; E-MAIL: [email protected]; Web: www.tts-global.net
To: TTS Head Office, Contact: Sophy Wu; E-mail: [email protected]
Note: 1- Please complete the form and send to TTS 3 days before the required inspection date.
2- Please enclosed the relevant files such as client’s PO, PI, Product requirement, Packing list, photos etc..
Please carefully follow these instructions in requesting all of TTS service.
Client/Buyer name:
Contact name:
E-mail:
Tel:
Report send to
Applicant
Other
CC report to
Company name:
Tel:
Applicant
Inspection Location
Contact name:
Factory name:
Address:
Contact:
Fax:
E-mail:
Product category:
Tel:
Mobile:
Inspection Date:
Estimate shipping date
Approval sample
Sealed at factory
Send to TTS
No
List of all of products to be inspected as below, you may send a attachment to TTS if necessary.
Client PO No.
Client
Product description
Quantity
model/item No.
E-mail:
Carton
Total
Service Type;
Final Random inspection (Pre-shipment inspection)
During-production inspection
Initial production inspection
Container Loading supervision
Re-inspection (Prev.report No:
)
Factory audit
Sample picking
Social Compliance Audit
Correction Action Follow Up
Other:
If the goods was not met the requirement for Final Random inspection (Pre-shipment inspection) when TTS inspector
arrival. You may choose :
(If you did not choose, we would Change Final Random inspection (Pre-shipment inspection) to the During-production
inspection when the quality requirement was not matched.)
Aborted inspection (110USD per man-day, the balance
Change Final Random inspection (Pre-shipment
inspection fee would return to your account or used for the next inspection) to the During-production inspection.
inspection.)
(Inspection fee was same as FRI/PSI inspection).
Inspection Standard/Requirement:
Inspection standard
ANSI/ASQ Z1.4-2008
Sample Level: I/II
AQL: Critical: 0; Major: 2.5; Minor: 4.0
Fabric Inspection
4 point system
Other special inspection standard
Yes
No
attached
If client has not the specific inspection standard.TTS general AQL sample is L-II; acceptable quality level is Critical: 0;
Major: 2.5; Minor: 4.0, would be used for inspection
Special requirement/ Remarks
Applicant
Vendor
Factory
Other:
The inspection charge will pay by
Note: 1-Once the inspection date is confirmed, any postponement or cancellation is required to advise to TTS before 15:00PM (China time) the
day before inspection date. After this deadline, the booked service will be count as a aborted inspection; 2-TTS agrees to thread any information
in connection with the execution of this agreement as confidential.TTS also warrants not to disclose to third parties, with the exception of parties
involved in the execution of the work upon prior consent of the client.
Client’s signature
and stamp:
Date:
Version: TTS-G-INSPECTION BOOKING-V2.1