This guide specification is to be used to develop an office master specification or
specification for a project. In either case, this guide specification must be edited to fit the
conditions of use. Particular attention should be given to the deletion of inapplicable
provisions. Include necessary items related to a particular project.
SPECIFIER SHALL REMOVE COMMENTS IN BOLD TEXT PRIOR TO
SUBMITTING.
THIS GUIDE SPECIFICATION SECTION IS INTENDED FOR USE IN THE
PREPARATION OF A PROJECT SPECIFICATION SECTION COVERING
COMMERCIAL LAUNDRY EQUIPMENT BY MAYTAG.
OPTIONAL TEXT REQUIRING A SELECTION BY THE USER IS ENCLOSED
WITHIN BRACKETS, E.G.: "[4] [2B] <Insert finish>"
SECTION 11 23 00.02
COMMERCIAL LAUNDRY EQUIPMENT
PART 1 - GENERAL
1.01
A.
1.02
SUMMARY
Section includes soft-mount front load high-speed washer/extractor and
accessories as shown on the Drawings and specified herein.
REFERENCES
A.
UL Certification:
Provide electric equipment and components that are
evaluated by UL for fire, and electric shock according to applicable safety
standards and that are UL certified for compliance and labeled for intended use.
B.
NFPA 70 - National Electrical Code.
1.03
A.
SUBMITTALS
Submit the following in accordance with Section 01 33 00:
1.
2.
3.
4.
Product Data: Manufacturer's data sheets on each product to be used,
including:
a.
Preparation instructions and recommendations.
b.
Storage and handling requirements and recommendations.
Shop Drawings: Include plans, elevations, roughing-in dimensions, utility
service requirements, and attachments to other work.
Coordination Drawings:
Indicate locations of laundry equipment,
connections to utilities and clearance requirements for equipment access
and maintenance.
Operation and Maintenance Data:
Operation, emergency and
maintenance manuals. Include a schedule with the following:
WHIRLPOOL CORPORATION, 2000 M-63, MD 8600, BENTON HARBOR, MICHIGAN 49022
www.MaytagCommercialLaundry.com
a.
b.
c.
1.04
Designation indicated on Drawings.
Manufacturer's name and model number.
List of factory-authorized service agencies including their addresses
and telephone numbers.
DELIVERY, STORAGE, AND HANDLING
A.
Store equipment on site protected from weather, direct sunlight and
temperature extremes. Do not remove packaging prior to storage.
B.
Consult manufacturer if machines are to be stored for an extended period of
time.
1.05
A.
1.06
A.
PROJECT CONDITIONS
Maintain environmental conditions (temperature, humidity, and ventilation)
within limits recommended by manufacturer for optimum results. Do not install
products under environmental conditions outside manufacturer's absolute limits.
WARRANTY
Manufacturer's standard form in which manufacturer agrees to repair or replace
any part of the equipment assembly that fails within specified warranty period.
All other costs, including labor, transportation and customs duty will be borne by
the Owner. Chemical damage is excluded from warranty coverage.
1.
B.
Warranty Period: Three (3) years from date of original purchase.
Manufacturer's standard form in which manufacturer agrees to repair or replace
shell, welded frame assembly, basket, shaft assembly, bearings and seals that
fail within specified warranty period. Chemical damage is excluded from
warranty coverage.
1.
Warranty Period: Five (5) years from date of original purchase.
PART 2 - PRODUCTS
2.01
A.
MANUFACTURER
Maytag Commercial Laundry, 2000 M63 North MD 8600, Benton Harbor, MI
49022.
2.02
WASHERS
SELECT THE FOLLOWING
PROJECT.
A.
WASHER/EXTRACTOR(S)
THAT
ARE
IN
THE
Maytag Commercial Energy Advantage Soft-Mount Front-Load High Speed
Extractor, Model No. MFS25PNF:
1.
2.
3.
4.
Load Capacity: 25 lbs (10 kg).
Cylinder Volume: 3.3 cu ft (93 liters).
Maximum Extract Speed/Maximum G Force: 1000 rpm/300.
Drive Motor: Inverter drive, variable speed, 2.0 HP (1.5 kw).
WHIRLPOOL CORPORATION, 2000 M-63, MD 8600, BENTON HARBOR, MICHIGAN 49022
www.MaytagCommercialLaundry.com
5.
6.
7.
B.
Maytag Commercial Energy Advantage Soft-Mount Front-Load High Speed
Extractor, Model No. MFS35PNF:
1.
2.
3.
4.
5.
6.
7.
C.
Load Capacity: 80 lbs (36 kg).
Cylinder Volume: 11.8 cu ft (334 liters).
Maximum Extract Speed/Maximum G Force: 830 rpm/350.
Drive Motor: Inverter drive, variable speed, 5.0 HP (4.0 kw).
Electrical Requirements: 208-240V Three-Phase.
Breaker Size Required: 30 Amps.
Operating Pressure 14.5-116 psi (0.1-0.8 mpa)
Maytag Commercial Energy Advantage Soft-Mount Front-Load High Speed
Extractor, Model No. MFS100PF:
1.
2.
3.
4.
5.
6.
7.
F.
Load Capacity: 55 lbs (22 kg).
Cylinder Volume: 7.8 cu ft (221 liters).
Maximum Extract Speed/Maximum G Force: 915 rpm/350.
Drive Motor: Inverter drive, variable speed, 4.0 HP (3.0 kw).
Electrical Requirements: 208-240V 4Three-Phase.
Breaker Size Required: 20 Amps.
Operating Pressure 43-73 psi (0.3-0.5 mpa)
Maytag Commercial Energy Advantage Soft-Mount Front-Load High Speed
Extractor, Model No. MFS80PNF:
1.
2.
3.
4.
5.
6.
7.
E.
Load Capacity: 35 lbs (16 kg).
Cylinder Volume: 5.9 cu ft (166 liters).
Maximum Extract Speed/Maximum G Force: 980 rpm/350.
Drive Motor: Inverter drive, variable speed, 3.0 HP (2.2 kw).
Electrical Requirements: 208-240V Single-Phase/Three-Phase.
Breaker Size Required: 20 Amps.
Operating Pressure 14.5-116 psi (1-8 bar)
Maytag Commercial Energy Advantage Soft-Mount Front-Load High Speed
Extractor, Model No. MFS55PNA:
1.
2.
3.
4.
5.
6.
7.
D.
Electrical Requirements: 208-240V Single-Phase/Three-Phase.
Breaker Size Required: 15 Amps.
Operating Pressure 14.5-116 psi (1-8 bar)
Load Capacity: 100 lbs (45 kg).
Cylinder Volume: 14.2 cu ft (402 liters).
Maximum Extract Speed/Maximum G Force: 830 rpm/350.
Drive Motor: Inverter drive, variable speed, 8.0 HP (6.0 kw).
Electrical Requirements: 208-240V Three-Phase.
Breaker Size Required: 40 Amps.
Operating Pressure 14.5-116 psi (0.1-0.8 mpa)
Maytag Commercial Energy Advantage Soft-Mount Front-Load High Speed
Extractor, Model No. MFS125PF:
1.
2.
3.
Load Capacity: 125 lbs (57 kg).
Cylinder Volume: 18.3 cu ft (518 liters).
Maximum Extract Speed/Maximum G Force: 830 rpm/350.
WHIRLPOOL CORPORATION, 2000 M-63, MD 8600, BENTON HARBOR, MICHIGAN 49022
www.MaytagCommercialLaundry.com
4.
5.
6.
7.
G.
Drive Motor: Inverter drive, variable speed, 8.0 HP (6.0 kw).
Electrical Requirements: 208-240V Three-Phase.
Breaker Size Required: 40 Amps.
Operating Pressure 14.5-116 psi (0.1-0.8 mpa)
Maytag Commercial Energy Advantage Soft-Mount High-Speed Front-Load
Washer/Extractor, Model No. MFS180PA:
1.
2.
3.
4.
Load Capacity: 180 lbs (80 kg).
Cylinder Volume: 28.5 cu ft (807 liters).
Maximum Extract Speed/Maximum G Force: 750 rpm/350.
Drive Motor: Inverter drive, variable speed, 11.0 HP (8.2 kw).
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
BREAKER SIZE BELOW. COORDINATE WITH ELECTRICAL ENGINEER.
5.
Electrical Requirements: [208-240V Three-Phase/50-60 Hz] [380-480V
Three-Phase/50-60 Hz].
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
ELECTRICAL REQUIREMENTS ABOVE. COORDINATE WITH ELECTRICAL
ENGINEER.
6.
7.
H.
Breaker Size Required: [60] [30] Amps.
Operating Pressure 14.5-116 psi (1-8 bar)
Maytag Commercial Energy Advantage Soft-Mount High-Speed Front-Load
Washer/Extractor, Model No. MFS230PA:
1.
2.
3.
4.
Load Capacity: 230 lbs (100 kg).
Cylinder Volume: 35.4 cu ft (1003 liters).
Maximum Extract Speed/Maximum G Force: 725 rpm/350.
Drive Motor: Inverter drive, variable speed, 15.0 HP (11.2 kw).
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
BREAKER SIZE BELOW. COORDINATE WITH ELECTRICAL ENGINEER.
5.
Electrical Requirements: [208-240V Three-Phase/50-60 Hz] [380-480V
Three-Phase/50-60 Hz].
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
ELECTRICAL REQUIREMENTS ABOVE. COORDINATE WITH ELECTRICAL
ENGINEER.
6.
7.
I.
Breaker Size Required: [60] [30] Amps.
Operating Pressure 14.5-116 psi (1-8 bar)
Maytag Commercial Energy Advantage Soft-Mount High-Speed Front-Load
Washer/Extractor, Model No. MFS230PT:
1.
2.
3.
4.
Load Capacity: 230 lbs (100 kg).
Cylinder Volume: 35.4 cu ft (1003 liters).
Maximum Extract Speed/Maximum G Force: 725 rpm/350.
Drive Motor: Inverter drive, variable speed, 15.0 HP (11.2 kw).
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
BREAKER SIZE BELOW. COORDINATE WITH ELECTRICAL ENGINEER.
5.
Electrical Requirements: [208-240V Three-Phase/50-60 Hz] [380-480V
Three-Phase/50-60 Hz].
WHIRLPOOL CORPORATION, 2000 M-63, MD 8600, BENTON HARBOR, MICHIGAN 49022
www.MaytagCommercialLaundry.com
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
ELECTRICAL REQUIREMENTS ABOVE. COORDINATE WITH ELECTRICAL
ENGINEER.
6.
7.
J.
Breaker Size Required: [60] [30] Amps.
Operating Pressure 14.5-116 psi (1-8 bar)
Maytag Commercial Energy Advantage Soft-Mount High-Speed Front-Load
Washer/Extractor, Model No. MFS275PA:
1.
2.
3.
4.
Load Capacity: 275 lbs (120 kg).
Cylinder Volume: 41.7 cu ft (1181 liters).
Maximum Extract Speed/Maximum G Force: 700 rpm/350.
Drive Motor: Inverter drive, variable speed, 18.5 HP (13.8 kw).
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
BREAKER SIZE BELOW. COORDINATE WITH ELECTRICAL ENGINEER.
5.
Electrical Requirements: [208-240V Three-Phase/50-60 Hz] [380-480V
Three-Phase/50-60 Hz].
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
ELECTRICAL REQUIREMENTS ABOVE. COORDINATE WITH ELECTRICAL
ENGINEER.
6.
7.
K.
Breaker Size Required: [60] [30] Amps.
Operating Pressure 14.5-116 psi (1-8 bar)
Maytag Commercial Energy Advantage Soft-Mount High-Speed Front-Load
Washer/Extractor, Model No. MFS275PT:
1.
2.
3.
4.
Load Capacity: 275 lbs (120 kg).
Cylinder Volume: 41.7 cu ft (1181 liters).
Maximum Extract Speed/Maximum G Force: 700 rpm/350.
Drive Motor: Inverter drive, variable speed, 18.5 HP (13.8 kw).
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
BREAKER SIZE BELOW. COORDINATE WITH ELECTRICAL ENGINEER.
5.
Electrical Requirements: [208-240V Three-Phase/50-60 Hz] [380-480V
Three-Phase/50-60 Hz].
SELECT THE STANDARD OR OPTIONAL VOLTAGE. COORDINATE WITH
ELECTRICAL REQUIREMENTS ABOVE. COORDINATE WITH ELECTRICAL
ENGINEER.
6.
7.
Breaker Size Required: [60] [30] Amps.
Operating Pressure 14.5-116 psi (1-8 bar)
PART 3 - EXECUTION
3.01
EXAMINATION
A.
Do not begin installation until substrates have been properly prepared.
B.
If substrate preparation is the responsibility of another installer, notify
Contractor of unsatisfactory preparation before proceeding.
3.02
A.
PREPARATION
Clean surfaces where washer is to be installed thoroughly prior to installation.
WHIRLPOOL CORPORATION, 2000 M-63, MD 8600, BENTON HARBOR, MICHIGAN 49022
www.MaytagCommercialLaundry.com
3.03
INSTALLATION
A.
Install in accordance with manufacturer's instructions.
B.
System Startup and Commissioning: Arrange for local manufacturer's
representative to inspect machines prior to startup and operation.
3.04
PROTECTION
A.
Protect installed products until Substantial Completion.
B.
Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
WHIRLPOOL CORPORATION, 2000 M-63, MD 8600, BENTON HARBOR, MICHIGAN 49022
www.MaytagCommercialLaundry.com