3GPP TSG-SA5 (Telecom Management)
Meeting SA5#59, 21 - 25 April 2008, Chengdu, CHINA
S5-080874
rev of S5-080722, S5-080830
CR-Form-v9.4
CHANGE REQUEST
32.422 CR 0038
 rev
-  Current version: 8.0.0


For HELP on using this form look at the pop-up text over the  symbols. Comprehensive instructions on
how to use this form can be found at http://www.3gpp.org/specs/CR.htm.
Proposed change affects: UICC apps
Title:
ME
Radio Access Network X
Core Network X
 Add definition of Trace control and configuration parameters for EPC and E-UTRAN
Source to WG:  Nokia Siemens Networks
Source to TSG:  S5
Work item code:  E-UTRAN-OAM
Category:
Date:  25/04/2008
 B
Release:  Rel-8
Use one of the following categories:
Use one of the following releases:
F (correction)
R99
(Release 1999)
A (corresponds to a correction in an earlier release)
Rel-4
(Release 4)
B (addition of feature),
Rel-5
(Release 5)
C (functional modification of feature)
Rel-6
(Release 6)
D (editorial modification)
Rel-7
(Release 7)
Rel-8
(Release 8)
Detailed explanations of the above categories can
Rel-9
(Release 9)
be found in 3GPP TR 21.900.
Reason for change:  Adding E-UTRAN and EPC specific parameters to the Trace control and
configuration parameters
Summary of change:  Adding the EPC specific trieggering events to MME, adding the EPC and EUTRAN specific interfaces to the list of Interfaces parameter and adding the new
nodes to the list of NE types to trace parameter. Adding 3 additional trace depth
parameter to align with TS 32.421.
Consequences if
not approved:

Clauses affected:
 5.1, 5.3, 5.4, 5.5 and 5.6
Other specs
affected:

Other comments:

Y N
X Other core specifications
X Test specifications
X O&M Specifications

1st Modified Section
5.1
Triggering events (M)
This mandatory parameter defines when to start a Trace Recording Session and which message shall be recorded first, when to stop a Trace Recording Session and which message
shall be recorded last respectively. The messages in the start triggering event tables indicate the transaction to be recorded first and the starting time of the Trace Recording Session
within a Trace Session for the traced MS/subscriber in the given NE.
The messages in the stop triggering event tables indicate the transaction to be recorded last and the stopping time of the Trace Recording Session.
MSC Server
Start triggering events
Stop triggering events
Mobile Originated Call
Receipt of the CM SERVICE-REQUEST message with service type Reception of CC-RELEASE COMPLETE or CM-SERVICE ABORT message
set to originating call establishment
Mobile Terminated Call
Sending of PAGING REQUEST message
Mobile Originated SMS
Receipt of the CM SERVICE-REQUEST message with service type Transmission of RP-ACK/RP-NACK message
set to Short Message service
Mobile Terminated SMS
Sending of PAGING REQUEST message
Reception of RP-ACK/RP-NACK message
IMSI Attach
Receipt of the MM-LOCATION UPDATING REQUEST message
Sending of MM-LOCATION-UPDATING ACCEPT or MM-LOCATION-UPDATINGREJECT message
Location Update
Receipt of the MM-LOCATION UPDATING REQUEST message
Sending of MM-LOCATION-UPDATING ACCEPT or MM-LOCATION-UPDATINGREJECT message
IMSI Detach
Receipt of the MM-IMSI DETACH INDICATION message
Reception of MM-IMSI DETACH INDICATION message
Handover
Receipt of the BSSMAP-HANDOVER-REQUIRED message in
case of GSM or RANAP-RELOCATION-REQUIRED message in
case of UMTS
Reception of BSSMAP-CLEAR COMPLETE message in case of GSM or RANAP-IU
RELEASE COMPLETE message in case of UMTS or BSSMAP-HANDOVER
FAILURE in case of GSM or RANAP-RELOCATION FAILURE in case of UMTS.
Supplementary Service
TBD
TBD
MGW
Context
Start triggering events
Reception of H.248-ADD command, or reception of H.248 MODIFY command
Reception of CC-RELEASE COMPLETE or CM-SERVICE ABORT message
Stop triggering events
Sending of H.248- SUBTRACT reply
SGSN
PDP Context
Mobile Originated SMS
Mobile Terminated SMS
GPRS Attach
Routing Area Update
GPRS Detach
MBMS Context
GGSN
PDP Context
MBMS Context
Start triggering events
Reception of SM-ACTIVATE PDP CONTEXT REQUEST or sending SM-REQUEST PDP
CONTEXT ACTIVATION or reception of SM- MODIFY PDP CONTEXT REQUEST
Receipt of RP-DATA message
Transmission of RP-DATA message
Reception of MM-ATTACH-REQUEST
Reception of MM-ROUTING AREA UPDATE REQUEST
Reception MM-DETACH REQUEST
Sending SM-Request MBMS Context Activation or reception of SM-Update MBMS
Context Request
Stop triggering events
Reception or sending of SM- DEACTIVATE PDP CONTEXT
REQUEST or sending SM-ACTIVATE PDP CONTEXT REJECT
Transmission of RP-ACK/RP-NACK message
Reception of RP-ACK/RP-NACK message
Sending MM-ATTACH-ACCEPT or MM-ATTACH-REJECT
Sending MM-ROUTING AREA UPDATE ACCEPT or MMROUTING AREA UPDATE REJECT
Reception of MM-DETACH ACCEPT
Sending of SM-Deactivate MBMS Context Request or sending
of SM-Activate MBMS Context Reject
Start triggering events
Reception of GTP Create PDP context request or reception of GTP Update PDP context request
Reception of GTP Create MBMS Context Request or reception of GTP Update MBMS Context Request
Stop triggering events
Sending of GTP Delete PDP context response
Sending of GTP Delete MBMS Context Response
S-CSCF
SIP INVITE method
SIP REGISTER method
SIP MESSAGE method
SIP SUBSCRIBE method
other SIP methods
Start triggering events
Reception of the initial SIP INVITE request
Reception of SIP REGISTER request
Reception of SIP MESSAGE request
Reception of SIP SUBSCRIBE request
Reception of any other SIP requests
(e.g. OPTIONS, REFER, INFO)
Stop triggering events
Sending of the SIP response to the SIP BYE request (sending or receiving) or any other error response
Sending the SIP response to the SIP REGISTER request
Sending the SIP response to the SIP MESSAGE request
Sending the SIP response to the final SIP NOTIFY request
Sending the SIP response to the appropriate SIP request
P-CSCF
SIP INVITE session
SIP REGISTER method
SIP MESSAGE method
SIP SUBSCRIBE method
other SIP methods
Start triggering events
Reception of the initial SIP INVITE request
Reception of SIP REGISTER request
Reception of SIP MESSAGE request
Reception of SIP SUBSCRIBE request
Reception of any other SIP requests
(e.g. OPTIONS, REFER, INFO)
Stop triggering events
Sending of the SIP response to the SIP BYE request (sending or receiving) or any other error response
Sending the SIP response to the SIP REGISTER request
Sending the SIP response to the SIP MESSAGE request
Sending the SIP response to the final SIP NOTIFY request
Sending the SIP response to the appropriate SIP request
BM-SC
MBMS Multicast service
activation
Start triggering events
Reception of MBMS Authorization
Request
Stop triggering events
Reception of Deactivation Indication for user deactivation or sending of Session Stop Request for service
deactivation
MME
Service request
Session setup
Initial Attach, Tracking
area update, Detach
Start triggering events
Reception of NAS: Service Request message
Reception of the Update Bearer Request message or the reception of the Create
Dedicated Bearer Request
Reception of the Attach request or TAU request or Detach request message
Stop triggering events
Reception of Update Bearer Response
Reception of Deactivate Bearer Response message
Reception of the Attach Complete or sending the TAU Accept or
sending.reception of the Detach accept message.
Bit 8
Bit 7
Bit 6
Bit 5
Bit 4
MSC Server
Bit 3
Bit 2
Bit 1
MGW
SGSN
GGSN
BM-SC
MME/SGW
Bit 8 Bit 7
spare
Bit 6
spare
Bit 8
Bit 5
SS
Bit 7
MSC Server
Bit 3
LU, IMSI attach, IMSI detach
spare
Bit 4
Handovers
Bit 6
MGW
Bit 4
Bit 5
Bit 2
MO and MT SMS
Bit 3
Spare
Bit 1
MO and MT calls
Bit 2
spare
Bit 1
Context
SGSN
Bit 8
Bit 8
Bit 7 Bit 6
spare
Bit 7
Bit 5
Bit 4
MBMS Context
Bit 6
Bit 5
Bit 3
RAU, GPRS attach, GPRS detach
Reserved
Bit 4
GGSN
Bit 3
Spare
Bit 8
Bit 7
Bit 8
Bit 7
Bit 6
SGW
Bit 6
spare
Bit 5
Spare
Bit 4
BM-SC
Bit 3
Bit 2
Bit 2
MO and MT SMS
Bit 2
MBMS Context
Bit 1
PDP context
Bit 1
PDP Context
Bit 1
MBMS Multicast service activation
MME
Bit 5
Bit 4
Bit 3
Initial
Attach,
Tracking
area
update,
Detach
Bit 2
Service
requests
Bit 1
Session setup
If a bit is set to 1 the given event shall be traced, i.e. a Trace Recording Session shall be started for that event.
If a bit is set to 0 the given event should not be traced, i.e. Trace Recording Session should not be started.
Next Modified Section
5.3
Trace Depth (M)
This mandatory parameter defines how detailed information should be recorded in the Network Element. The following
table describes the values of the Trace Depth parameter.
Trace Depth
VendorMinimum
Meaning
Recording of some IEs in the signalling messages plus any vendor specific extensions to this
definition, in decoded format.
VendorMedium
Recording of some IEs in the signalling messages together with the radio measurement IEs plus any
vendor specific extensions to this definition, in decoded format.
VendorMaximum Recording entire signalling messages plus any vendor specific extensions to this definition, in
encoded format.
Minimum
Recording of some IEs in the signalling messages in decoded format.
Medium
Recording of some IEs in the signalling messages together with the radio measurement IEs in
decoded format.
Maximum
Recording entire signalling messages in encoded format.
At least one of Minimum, Medium or Maximum trace Depth shall be supported depending on the NE type (see trace
record description in TS 32.423 [3] for details).
Trace depth shall be an enumerated parameter with the following possible values:
0 – VendorMinimum,
1 – VendorMedium
2 – VendorMaximum
3 – Minimum
4 – Medium and
5 - Maximum
5.4
List of NE types (M)
This mandatory parameter defines the Network Element types where Trace Session activation is needed. This parameter
has meaning only in the signalling based activation mechanism and it is used to determine whether the Trace Session
Activation shall be propagated further to other Network Elements. In management based activation mechanism this
parameter is not needed.
The following list contains the Network Element types:










Bit 8
SGW
MSC Server
MGW
RNC
SGSN
GGSN
BM-SC
MME
SGW
PDN GW
eNB
Bit 7
MME
Bit 6
BM-SC
Bit 5
RNC
Bit 4
GGSN
spare
If a bit is set to 1, Trace Session to that Network Element shall be activated.
If a bit is set to 0, Trace Session is not needed in that Network Element.
Bit 3
SGSN
Bit 2
MGW
eNB
Bit 1
MSC-S
PDN GW
5.5
List of interfaces (O)
This is an optional parameter, which defines the interfaces to be recorded in the Network Element.
The following list contains the list of interfaces in each Network Element:
 MSC Server: A, Iu-CS, Mc and MAP (G, B, E, F, D, C) interfaces, CAP.
 MGW: Mc, Nb-UP, Iu-UP.
 RNC: Iu-CS, Iu-PS, Iur, Iub and Uu interfaces.
 SGSN: Gb, Iu-PS, Gn, MAP (Gr, Gd, Gf), CAP (Ge) and Gs interfaces.
 GGSN: Gn, Gi and Gmb interfaces.
 S-CSCF: Mw, Mg, Mr and Mi interfaces.
 P-CSCF: Gm and Go interfaces.
 HSS: MAP (C, D, Gc, Gr) and Cx interfaces and location and subscription information.
 BM-SC: Gmb interface.
 MME: S1-MME, S3, S6a, S10, S11
 SGW: S4, S5, S8b, S11
 PDN GW: S2a, S2b, S2c, S5, S6c, Gx, S8b, SGi
 eNB: S1-MME, X2, Uu
Bit 8
Bit 7
Bit 6
Bit 5
Bit 4
MSC Server
Bit 3
Bit 2
Bit 3
Mc
Bit 2
Iu
MAP-C
Bit 1
MGW
SGSN
GGSN
RNC
BM-SC
MME
SGW
PDN GW
eNB
Bit 8
CAP
Bit 7
MAP-F
MSC Server
Bit 5
Bit 4
MAP-B
MAP-G
Bit 6
MAP-E
spare
Bit 8
Ge
Bit 8
Bit 7
Gs
Bit 7
Bit 6
MAP-Gf
Bit 6
Spare
SGSN
Bit 5
MAP-Gd
spare
Bit 5
MGW
Bit 4
Bit 4
MAP-Gr
Bit 3
Gn
Bit 3
Iu-UP
Bit 2
Iu
Bit 2
Nb-UP
Bit 1
A
MAP-D
Bit 1
Gb
Bit 1
Mc
GGSN
Bit 8
Bit 7
Bit 6
Spare
Bit 5
Bit 8
Bit 7
Bit 6
Bit 5
Bit 6
Bit 5
spare
Bit 4
Bit 3
Gmb
Bit 2
Gi
Bit 1
Gn
Bit 4
Uu
Bit 3
Iub
Bit 2
Iur
Bit 1
Iu
Bit 4
Bit 3
Bit 2
Bit 1
Gmb
RNC
Spare
BM-SC
Bit 8
Bit 7
MME
Bit 8
Bit 7
Spare
Bit 6
Bit 5
S11
Bit 8
Bit 7
Bit 6
Spare
Bit 5
Bit 8
SGi
Bit 7
S8b
Bit 6
Gx
PDN GW
Bit 5
S6c
Bit 8
Bit 7
Bit 6
Bit 5
Bit 4
S10
Bit 3
S6a
Bit 2
S3
Bit 1
S1-MME
Bit 4
S11
Bit 3
S8b
Bit 2
S5
Bit 1
S4
Bit 4
S5
Bit 3
S2c
Bit 2
S2b
Bit 1
S2a
Bit 4
Bit 3
Uu
Bit 2
X2
Bit 1
S1-MME
SGW
eNB
Spare
If a bit is set to 1, the interface should be traced in the given Network Element.
If a bit is set to 0, that interface should not be traced in the given Network Element.
5.6
Trace Reference (M)
The Trace Reference parameter shall be globally unique, therefore the Trace Reference shall compose as follows:
MCC+MNC+Trace ID, where the Trace ID is a 2 byte Octet String.
End of modifications