BLAST LIGHT
12 VOLT - 20 WATT
ART.NR.
50010
1)
2)
3)
4)
5)
6)
MODEL
DESCRIPTION
ABBL-20
HALOGEN BLAST LIGHT, COMPLETE
(20 Watt, including 12 V halogen bulb and 75 cm cable,
excluding connector)
50020
50030
50040
50050
50060
50070
8) 50075
Replacement bulb, 12 Volt 20 Watt - halogen
Replacement lenses (per 100)
Front end cap
Rear end cap
Lamp holder (complete)
Brass bulb holder only
*
9) 50104
10) 50106
11) 50095
50105
50120
4 Outlet Transformer, 120 VA,
1 x 16A 220 Volt Input, 4 x CEE 16A (F) 12 Volt Output
Full rubber housing, 3 meter rubber cable with connector
CEE-Connector, 2 poles, 16A (Male)
CEE-Connector, 2 poles, 16A (Female)
Cable (2 x 0.75 mm2) Black Rubber
RWPK H05RN-F
RWPK H05RN-F
Cable (2 x 1.50 mm2) Black Rubber
Cable (2 x 1.50 mm²) Neoprene
NWPK H07RN-F
* Other executions available on request.
0903 © Airblast B.V.
Section 5
Page 1
BLAST LIGHT
12 AND 24 VOLT - 20 WATT
ART.NR.
MODEL
DESCRIPTION
12 VOLT AND 24 VOLT HALOGEN BLAST LIGHTS
POWER - UP TO 100 WATT
50108
ABKR -12/20
BLAST LIGHT 12 Volt / 20 Watt
Incl. 12 Volt halogen bulb, 5 m cable (2 x 0.75 mm2) and CEEConnector (Male)
50101
ABKR -24/20
BLAST LIGHT 24 Volt / 20 Watt
Incl. 24 Volt halogen bulb, 5 m cable (2 x 0.75 mm2) and CEEConnector (Male)
SPARE PARTS FOR ABKR-12/20 AND ABKR-24/20
1) 50107
50102
2) 50103
3) 50104
4) 50095
50105
50120
5) 50121
6) 50122
7) 50123
8) 50124
9) 50125
10) 50126
09003 © Airblast B.V.
Halogen bulb 12 Volt / 20 Watt
Halogen bulb 24 Volt / 20 Watt
Lens
CEE-Connector, 2 poles, 16A (Male)
Cable (2 x 0.75 mm2) Black Rubber
Cable (2 x 1.50 mm2) Black Rubber
Cable (2 x 1.50 mm2) Neoprene
Fitting
Spring clip
Cable connector
Rubber plug
Clamp
Bolt (not shown)
RWPK H05RN-F
RWPK H05RN-F
NWPK H07RN-F
Section 5
Page 2
BLAST LIGHTS AND TRANSFORMERS
ART.NR.
MODEL
50110
HALO -24/100
50200
HALO -24/100
DESCRIPTION
-SW
BLAST LIGHT 24 Volt / 100 Watt with ON/OFF-Switch
Full Rubber housing with reflector. Incl. halogen bulb, 5 m cable
(2 x 1.5 mm2) and CEE- Connector (M)
* Also available in 12 Volt and 42 Volt execution
BLAST LIGHT 24 Volt / 100 Watt
Full Rubber housing with reflector. Incl. halogen bulb, 5 m cable
(2 x 1.5 mm2) and CEE- Connector (M)
SPARE PARTS FOR HALO-24/100
Bulb 24 Volt / 100 Watt
CEE-Connector 24V / 16A (M)
Cable (2 x 1.50 mm2)
Neoprene
Neoprene
Cable (2 x 2.50 mm2)
Rubber plug
1) 50111
2) 50104
3) 50120
50130
4) 50127
*
NWPK H07RN-F
NWPK H07RN-F
TRANSFORMERS FOR 24V BLAST- AND FLOOD LIGHTS
Incl. 3 m (2 x 1.5 mm2) Grounded cable and 24 Volt 16A
CEE-Output (Female) - Full rubber housing
Thermal Safeguard against overload.
50115
50116
TRANS-MINI
TRANS-MIDI
220V / 24V
220V / 24V
120VA 1 x 24 Volt / 16A CEE-output (F)
225VA 2 x 24 Volt / 16A CEE-output (F)
50301
50302
50303
50304
TRANS-I/1
TRANS-I/2
TRANS-I/3
TRANS-I/4
220V / 24V
220V / 24V
220V / 24V
220V / 24V
500VA
500VA
500VA
500VA
50305
50306
50307
TRANS-II/2
TRANS-II/3
TRANS-II/4
220V / 24V
220V / 24V
220V / 24V
1 x 24 Volt / 16A CEE-output (F)
2 x 24 Volt / 16A CEE-output (F)
3 x 24 Volt / 16A CEE-output (F)
4 x 24 Volt / 16A CEE-output (F)
1000VA 2 x 24 Volt / 16A CEE-output (F)
1000VA 3 x 24 Volt / 16A CEE-output (F)
1000VA 4 x 24 Volt / 16A CEE-output (F)
* Other executions available on request
0903 © Airblast B.V.
Section 5
Page 3
HALOGEN FLOOD LIGHTS
12, 24, 42 AND 220 VOLT – UP TO 500 WATT
ART.NR.
MODEL
DESCRIPTION
AIRBLAST Floodlights are executed according to IP 54,
Protection class I, Aluminium press cast housing, Safety
glass, synthetic coated frame
50170
AFL-220/500
FLOOD LIGHT 220 Volt - 500 Watt - HALOGEN
includes halogen bulb of 500 Watt, 4 meters of rubber cable
(3 x 1.50 mm2 ), connector and frame.
50180
AFL-220/1000
FLOOD LIGHT 220 Volt - 1000 Watt - HALOGEN
includes halogen bulb of 1000 Watt, 4 meters of rubber cable
(3 x 1.50 mm2 ), connector and frame.
SPARE PARTS:
50181
50182
50183
50184
50185
50186
50187
50188
50189
50190
0903 © Airblast B.V.
Replacement bulb Halogen 500 Watt
Replacement bulb Halogen 1000 Watt
Safety glass
- AFL-220 / 500
Safety glass
- AFL-220 / 1000
Lamp holder
- AFL-220 / 500
Lamp holder
- AFL-220 / 1000
Frame
- AFL-220 / 500
Frame
- AFL-220 / 1000
Wire Mesh Screen
- AFL-220 / 500
Wire Mesh Screen - AFL-220 / 1000
Section 5
Page 4
HALOGEN FLOOD LIGHTS
12, 24, 42 AND 220 VOLT – UP TO 500 WATT
ART.NR.
MODEL
DESCRIPTION
50240
FLOOD LIGHT - LOW VOLTAGE EXECUTION
Protection according to IP 54, Protection class III, Aluminium
press cast housing, Safety glass.
Heavy execution
Exclusive Halogen bulb.
Fitting for: Halogen bulb
12 Volt - 50 Watt (2x)
Halogen bulb
24 Volt - 150 Watt (2x)
50245
FLOOD LIGHT
Protection according to IP 54, Protection class I, Aluminium
press cast housing, Safety glass.
Heavy execution
Exclusive Halogen bulb.
Fitting for: Halogen bulb 220 Volt - Up to 500 Watt
Halogen bulb
42 Volt - Up to 500 Watt
ACCESSORIES AND SPARE PARTS
50151
50152
50153
50154
50181
50250
50120
50130
50104
50140
Halogen bulb 12 Volt /
50 Watt (2 Pieces required)
Halogen bulb 24 Volt / 150 Watt (2 Pieces required)
Halogen bulb 42 Volt / 500 Watt
Halogen bulb - 220 Volt / 300 Watt
Halogen bulb - 220 Volt / 500 Watt
Wire mesh screen
Cable (2 x 1.50 mm2) Neoprene NWPK H07RN-F
Cable (2 x 2.50 mm2) Neoprene NWPK H07RN-F
CEE-Connector 24 Volt 16A - Male
CEE-Connector 42 Volt 16A - Male
50255
50260
Pole fixture - up to 60 mm diameter
Pole fixture - up to 100 mm diameter
50265
Tripod, executed in galvanized steel, height adjustable from
1.50 up to 3.50 meters. M10 thread on top
50270
Tripod, executed in galvanized steel, height adjustable from
0.95 up to 1.40 meters. M10 thread on top
0903 © Airblast B.V.
Section 5
Page 5
CLEANBLAST
WATER INJECTION SYSTEM
ART.NR.
50755
MODEL
DESCRIPTION
CLEANBLAST
CLEANBLAST, COMPLETE
Water injection system for variable pressure wetblasting,
incl. nozzle holder assembly and 15 m high pressure hose.
50341
NOZZLE HOLDER ASSEMBLY, see Page 8
Spare parts for CLEANBLAST:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
50760
50761
50762
50763
50764
50765
50766
50767
50768
50769
50770
50771
50772
50773
50774
50775
50776
50777
50778
50779
50780
50781
50782
50783
50784
0903 © Airblast B.V.
Washer
Lock Nut ¼"
Pipe ¼" MM
Ball Valve ¼"
Hex Nipple ¼"
Air Filter
Elbow Swivel 90° ¼" x 8 mm
Plastic Tube 8 mm OD
Adapter ¼" Female x Male
Flow Meter 1 - 40 Litres / minute
Hex nipple ¼"
Elbow Swivel 90° ¼"
Hex nipple ¼"
Swivel union ¼"
Needle valve ¼" High Pressure water control
Pipe ¼" MM
Washer
Washer ¾"
Lock nut ¾"
Pipe ¾" MM
Strainer ¾"
Swivel Union ¾"
Adapter
Hex nipple
Pneumatic pump, Ratio 2.5 : 1
Section 5
Page 6
CLEANBLAST
WATER INJECTION SYSTEM
0903 © Airblast B.V.
Section 5
Page 7
NOZZLE HOLDER ASSEMBLY
FOR CLEANBLAST
ART.NR.
MODEL
50341
DESCRIPTION
NOZZLE HOLDER ASSEMBLY, complete
SPARE PARTS
NOZZLE HOLDER ASSEMBLY
1)
2)
3)
4)
5)
6)
7)
8)
9)
50725
50731
50743
50741
50742
50691
50701
50721
50711
***
10) 77025
***
Adaptor Nipple
Elbow ¼" FF
Hex Nipple ¼"
Water Flow Regulator
Ball Valve ¼"
Rubber O-Ring
Water Nozzle Insert
Body
Rear Insert
(1)
(1)
(3)
(1)
(1)
(1)
(1)
(1)
(1)
15 mtrs. High Pressure hose ¼" incl. couplings
(not shown)
Optional, not included
0903 © Airblast B.V.
Section 5
Page 8
AQUABLAST AND
HYPODERMIC NEEDLE GAUGE
ART.NR.
1)
2)
3)
4)
5)
6)
MODEL
DESCRIPTION
50310
AQUABLAST
AQUABLAST - WETBLAST ATTACHMENT, COMPLETE
Includes water jacket, shut-off valve, flexible hose and petcock
50311
AQUABLAST /B
AQUABLAST - WETBLAST ATTACHMENT, BARE
Exclusive of petcock and hose
50315
50316
50317
11520
21789
50318
Water jacket
Coupling, ¼" x 8 mm
Water hose
Ball valve ¼"
Hose barb incl. nut
Bolt
(1)
(2)
(1)
(1)
(1)
(3)
Maximum outside nozzle diameter: 40 mm
50330
PRG
HYPODERMIC NEEDLE GAUGE, COMPLETE
Nozzle pressure gauge kit
50331
PRG - N
Needles for gauge (5 per box)
0903 © Airblast B.V.
Section 5
Page 9
AFTERCOOLERS
ART.NR.
MODEL
DESCRIPTION
AIRBLAST PNEUMATIC AFTER COOLERS
Complete with:
- Moisture separator
- Oiler and moisture separator for pneumatic motor
- Heavy duty transport frame
Maximum operating pressure 16 bar
50810
50815
50820
50825
50830
50835
50840
50845
50850
50855
50860
50865
50870
50875
50880
50885
*
ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC ABAC -
10
20
30
40
50
65
80
120
160
200
250
300
400
500
650
750
/EL
/EL
/PN
/PN
/PN
/PN
/PN
/PN
/PN
/PN
/PN
/PN
/PN
/PN
/PN
/PN
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
Capacity
1,0
2,0
3,0
4,0
5,0
6,5
8,0
12,0
16,0
20,0
25,0
30,0
40,0
50,0
65,0
75,0
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
cbm per minute
*
*
Only available in electric execution
Capacities are based upon the following conditions:
Ambient temperature
Working pressure
Rel. humidity
Air inlet temp.
Delta T
: 21°C - 35°C
: 8 bar
: 60%
: 120°C
: 9°C (above ambient temperature)
The above mentioned aftercoolers are also available in electric execution.
0903 © Airblast B.V.
Section 5
Page 10