CD-T100H-01
PRODUCT OVERVIEW
T-100-H
Product
Description
Wireless Digital Thermostat
The Evolve Wireless Digital Thermostat is designed to control the majority of HVAC systems with
its all-in-one design including a 128 x 64 backlit graphical display and 6 button keypad with on
screen labels. The Wireless Thermostat contains a robust interface and is designed for use with
communicating systems where remote monitoring and/or remote control are desired. The
Thermostat interface includes heating and cooling display, system mode, fan mode display and
control and fan cycler amongst other features. The device can be wall mounted on a single-gang
junction box and requires both 24VAC (R) and 24VAC (C) wires from the HVAC System for power.
This Wireless Digital Thermostat is designed to work with other Evolve enabled devices. Evolve
nodes of other types can be included in the network and will also act as repeaters to increase the
range of the network.
Specifications
•
•
•
•
•
•
Wiring
SKU: T-100-H
Supported Networks:
- Z-Wave – Signal (Frequency) 908.42 MHz
Power: 24 VAC, Wiring 18 AWG
Dimensions: 4.5” H x 5.125” W x 1” D
Weight: 0.51 lbs.
Available in Glass or Matte finish
The device uses standard thermostat connections: C, R, W1, W2, Y1, Y2, G. The use of each of
these terminals vary by application. The most common applications are outlined below; for
applications not found on this list, please contact Evolve Technical Support at support@
evolvecontrols.com for more detail.
CD-T100H-01
PRODUCT OVERVIEW
Evolve
Wiring Cont’d
Model T100H ZWave Thermostat
HVAC Type: Hotel 3 Speed
HVAC Type: Hotel 3 speed
HVAC System Wiring
HVAC System Wiring
* Heat Pump diagram on next page.
Rev A 3-09-11
Voltage: 24VAC
Voltage: 24VAC
Single Transformer Systems
Single Transformer Systems
Optional 24R Connection for single transformer HVAC Systems
RC and RH are jumpered together on thermostat board.
Cut RC/RH jumper JP1 for separate heating and cooling transformers
Cooling 24V
24RC
24C
Fan Low
G
Compressor
Y1
W1
Fan High
Y2
W2/O
24RH
24V Com
24V Heating
Heating
Fan Med
Remote Sensor 2
RS2
RS1
Remote Sensor 1
Remote Sensor 2
RS2
RS1
Remote Sensor 1
Sensor Shield
RSC
RSC
Sensor Shield
NU
HC
H1
NU
Hotel HVAC System
Thermostat Connection
C 24VAC Common
R 24VAC Return
Heat
Compressor
Fan Low
Fan Med
Fan High
T-100-H Wiring Diagram
CD-T100H-01
PRODUCT OVERVIEW
Model T100H ZWave Thermostat
Rev A 3-09-11
HVAC Type: Hotel Heat Pump
Voltage: 24VAC
Wiring Cont’d
Single Transformer
System
HVAC System
Wiring
HVAC Type:
Hotel Heat Pump
Voltage: 24VAC
HVAC System Wiring
Single Transformer Systems
Optional 24R Connection for single transformer HVAC Systems
RC and RH are jumpered together on thermostat board.
Cut RC/RH jumper JP1 for separate heating and cooling transformers
Cooling 24V
24RC
24C
Fan Low
G
Compressor
Y1
W1
Fan High
Y2
W2/O
24RH
24V Com
24V Heating
Aux Heat
Change over valve*
Remote Sensor 2
RS2
RS1
Remote Sensor 1
Remote Sensor 2
RS2
RS1
Remote Sensor 1
Sensor Shield
RSC
RSC
Sensor Shield
NU
HC
H1
NU
Heat Pump HVAC System
THERMOSTAT CONNECTION
C 24VAC Common
R 24VAC Return
W Electric Heat
O Change Over Valve*
Y Compressor
G Low Fan
High Fan
* Reversing Valve
T-100-H Wiring Diagram
CD-T100H-01
T100H System Type Setup
PRODUCT OVERVIEW
T100H Output options
Wiring Cont’d
System
Type Selection in the Installer Setup Menu
System Type Selection in the Installer Setup Menu
System Type
Fan Speeds
Heat Stages
Cool Stages
Terminal
C
RH
RC
W1
W2/O
G
Y1
Y2
Fan Coil A
3 speed
1
1
Fan Coil B
2 speed
1
2
Heat Pump A
1 speed
3
2
Heat Pump B
2 speed
2
1
Output
24VAC C
24VAC R
nu
Heat valve
Fan 2
Fan 1
Cool Valve 1
Fan 3
Output
24VAC C
24VAC R
nu
Heat valve
Fan 2
Fan 1
Cool Valve 1
Cool stg 2
Output
24VAC C
24VAC R
nu
Aux Elect Ht
Changeover
Fan 1
Comp stg 1
Comp stg 2
Output
24VAC C
24VAC R
nu
Aux Elect Ht
Changeover
Fan 1
Comp stg 1
Fan 2
T100H Wiring Diagram
CD-T100H-01
PRODUCT OVERVIEW
T-100-H
Product
Description
Wireless Digital Thermostat
The Evolve Wireless Digital Thermostat is designed to control the majority of HVAC systems with
its all-in-one design including a 128 x 64 backlit graphical display and 6 button keypad with on
screen labels. The Wireless Thermostat contains a robust interface and is designed for use with
communicating systems where remote monitoring and/or remote control are desired. The
Thermostat interface includes heating and cooling display, system mode, fan mode display and
control and fan cycler amongst other features. The device can be wall mounted on a single-gang
junction box and requires both 24VAC (R) and 24VAC (C) wires from the HVAC System for power.
This Wireless Digital Thermostat is designed to work with other Evolve enabled devices. Evolve
nodes of other types can be included in the network and will also act as repeaters to increase the
range of the network.
Specifications
•
•
•
•
•
•
Wiring
SKU: T-100-H
Supported Networks:
- Z-Wave – Signal (Frequency) 908.42 MHz
Power: 24 VAC, Wiring 18 AWG
Dimensions: 4.5” H x 5.125” W x 1” D
Weight: 0.51 lbs.
Available in Glass or Matte finish
The device uses standard thermostat connections: C, R, W1, W2, Y1, Y2, G. The use of each of
these terminals vary by application. The most common applications are outlined below; for
applications not found on this list, please contact Evolve Technical Support for more detail.
CD-T100H-01
PRODUCT OVERVIEW
Evolve
Wiring Cont’d
Model T100H ZWave Thermostat
HVAC Type: Hotel 3 Speed
HVAC Type: Hotel 3 speed
HVAC System Wiring
HVAC System Wiring
* Heat Pump diagram on next page.
Rev A 3-09-11
Voltage: 24VAC
Voltage: 24VAC
Single Transformer Systems
Single Transformer Systems
Optional 24R Connection for single transformer HVAC Systems
RC and RH are jumpered together on thermostat board.
Cut RC/RH jumper JP1 for separate heating and cooling transformers
Cooling 24V
24RC
24C
Fan Low
G
Compressor
Y1
W1
Fan High
Y2
W2/O
24RH
24V Com
24V Heating
Heating
Fan Med
Remote Sensor 2
RS2
RS1
Remote Sensor 1
Remote Sensor 2
RS2
RS1
Remote Sensor 1
Sensor Shield
RSC
RSC
Sensor Shield
NU
HC
H1
NU
Hotel HVAC System
Thermostat Connection
C 24VAC Common
R 24VAC Return
Heat
Compressor
Fan Low
Fan Med
Fan High
T-100-H Wiring Diagram
CD-T100H-01
PRODUCT OVERVIEW
Model T100H ZWave Thermostat
Rev A 3-09-11
HVAC Type: Hotel Heat Pump
Voltage: 24VAC
Wiring Cont’d
Single Transformer
System
HVAC System
Wiring
HVAC Type:
Hotel Heat Pump
Voltage: 24VAC
HVAC System Wiring
Single Transformer Systems
Optional 24R Connection for single transformer HVAC Systems
RC and RH are jumpered together on thermostat board.
Cut RC/RH jumper JP1 for separate heating and cooling transformers
Cooling 24V
24RC
24C
Fan Low
G
Compressor
Y1
W1
Fan High
Y2
W2/O
24RH
24V Com
24V Heating
Aux Heat
Change over valve*
Remote Sensor 2
RS2
RS1
Remote Sensor 1
Remote Sensor 2
RS2
RS1
Remote Sensor 1
Sensor Shield
RSC
RSC
Sensor Shield
NU
HC
H1
NU
Heat Pump HVAC System
THERMOSTAT CONNECTION
C 24VAC Common
R 24VAC Return
W Electric Heat
O Change Over Valve*
Y Compressor
G Low Fan
High Fan
* Reversing Valve
T-100-H Wiring Diagram
CD-T100H-01
T100H System Type Setup
PRODUCT OVERVIEW
T100H Output options
Wiring Cont’d
System
Type Selection in the Installer Setup Menu
System Type Selection in the Installer Setup Menu
System Type
Fan Speeds
Heat Stages
Cool Stages
Terminal
C
RH
RC
W1
W2/O
G
Y1
Y2
Fan Coil A
3 speed
1
1
Fan Coil B
2 speed
1
2
Heat Pump A
1 speed
3
2
Heat Pump B
2 speed
2
1
Output
24VAC C
24VAC R
nu
Heat valve
Fan 2
Fan 1
Cool Valve 1
Fan 3
Output
24VAC C
24VAC R
nu
Heat valve
Fan 2
Fan 1
Cool Valve 1
Cool stg 2
Output
24VAC C
24VAC R
nu
Aux Elect Ht
Changeover
Fan 1
Comp stg 1
Comp stg 2
Output
24VAC C
24VAC R
nu
Aux Elect Ht
Changeover
Fan 1
Comp stg 1
Fan 2
T100H Wiring Diagram