VISIBLE LIGHT PRODUCTS
SPECIFICATION
HPLB-59K15xW
High Power 15W LED Module
Drawn by
Checked by
Approved by
RoHS
Conformity
DATE:2009/3/5
REV:A
2DEVICE NO:HPLB-59K15xW
HighPower15WLEDModuleismadeofhi-effAS/TSGaI
chipswithprecisepackagetechniquewhichmakesexcellent
nN
heatdissipationto
reachtheadvantagesofhighluminousefficiency,lowdecay
endurance.Nowwehavethesecolorsavailable:red,green,b
,andlong
lue,white,yellow
andinfrared.
X
2FEATERUS
Instantlight
X
Longoperatinglife
X
SuperiorESDdefense
X
LowvoltageDCoperated
X
Moreenergyefficientthanincandescentandmosthalogenla
X
2TYPICALAPPLICATIONS
Architecturaldetaillighting
X
Portableflashlight
X
X
Readinglights
Medicalapplications
X
LCDbacklights
X
Beaconlights
X
Decorationlights
1
mps
2DEVICE NO:HPLB-59K15xW
2 Explanation of Part Number:
H P
1
LB - 5
2
9
3
K 15
4
5
xW
6
1.High power products kinds:
HP: Huey Jann High Power
3.Lens appearance:
2.Shape distinguish:
LB: Light Bar
4.Color number:
4:Water Clear
3: Green
4: Yellow
5:White Diffusion
5: Red
8: Blue
9: White
5.Power type:
6.Color kind:
15: 15W
BW: Cool White
W: Pure White
NW: Nature White
YW: Warm White
2DEVICES
Item
Lens Color
Dice Source
Cool White
HPLB-59K15BW
HPLB-59K15W
Color
White Diffusion
GaInN/GaN
Pure White
HPLB-59K15NW
Nature White
HPLB-59K15YW
Warm white
2DEVICE NO:HPLB-59K15xW
2PACKAGE DIMENSIONS:
16.5
2.5
17
-+
+-
2.5
£r2
140
1.65
2.0
1.5
1.5
NOTE:
1.All dimensions are in millimeter.
2.Lead spacing in measured where the lead emerge from the package.
3.prodruded resin under flange is 1.5mm max.
4.specifications are subject to change without notice.
5.Tolerance is
¡Ó0.3mm unless otherwise noted.
6.Driving LED without heat sinking device is forbidden.
o
7.It is strongly recommended that the temperature of lead be not higher than 55 C.
8.Proper current derating must be observed to maintain junction temperature below the maximum.
9.LEDs are not designed to be driven in reserve bias.
10. Warps the degree
¡Ó0.5mm.
2DEVICE NO:HPLB-59K15xW
2ABSOLUTE MAXIMUM RATINGS
TA=25°C
PARAMETER
SYMBOL
MAX. RATING
UNIT
IF
1400
mA
IFM
1500
mA
ESD
4000
V
Tj
135
°C
Operating Temperature
Topr
-40 ~ +110
°C
Storage Temperature
Tstg
-40 ~ +120
°C
Continuous Forward Current
Peak Forward Current
*1
Electrostatic Discharge (HBM)
LED Junction Temperature
Manual Soldering Temperature 260 °C for 5 seconds max. *2
*1.Duty Ratio=0.1%,Pulse Width=10us.
*2.Iron soldering high temperature will not cause damage to the dice. But be aware of the high temperature
will not only make the epoxy soften but also cause the lead moving and the gold wire broken and even open.
So before returning to the normal temperatures PLEASE AVOID any serious pressure on the top of epoxy
and lead.
*3. We suggest using PWM (Pulse Width Modulation) for driving.
*4. It is recommended to use series as there are several 3pcs. If there are more than 5pcs, please use
product with higher power.
4
2DEVICE NO:HPLB-59K15xW
2ELECTRIC-OPTICAL CHARACTERISTICS
TA=25°C
PARAMETER
SYMBOL
View Angle of Half Power
TEST
CONDITION
MIN
TYP
2q1/2
120
Forward Voltage
VF
10.5
Color Rendering Index
CRI
Thermal Resistance Junction
To Case
Temperature
Coefficient
Forward Voltage
Of
£c
R
MAX
UNIT
deg
12.0
V
85
IF=1400mA
o
2.8
J-C
¡µV /¡µT
mV/oC
-2
F
C/W
2 ELECTRIC-OPTICAL CHARACTERISTICS FOR LUMINOUS INTENSITY
TA=25°C
ITEM
SYMBOL
TEST
CONDITION
MIN
TYP
MAX
UNIT
1017
HPLB-59K15BW
1017
HPLB-59K15W
IV
IF=1400mA
lm
HPLB-59K15NW
988
HPLB-59K15YW
915
*Tolerance:̇ 15%measuringequipment:EXELTRON2001.2.S370m
adebyU.D.T.
Ó
5
2DEVICE NO:HPLB-59K15xW
2 ELECTRIC-OPTICAL CHARACTERISTICS FOR COLOR TEMPERATURE
TA=25°C
ITEM
SYMBOL
TEST
CONDITION
TYP
MAX
UNIT
8000
HPLB-59K15BW
HPLB-59K15W
MIN
6000
CCT
IF=1400mA
HPLB-59K15NW
4000
HPLB-59K15YW
3300
*Tolerance:̇ 15%measuringequipment:EXELTRON2001.2.S370m
Ó
6
adebyU.D.T.
o
K
2DEVICE NO:HPLB-59K15xW
2RELIABILITY TEST
Ø
Endurance Test
Test Item
Operation Life
Reference Standard
MIL-STD-750:1026
Connect with a power if=1400mA
MIL-STD-883:1005
Ta=Under room temperature
JIS-C-7021
Test Time=1,000hrs
:B-1
High
Temperature
MIL-STD-202:103B
High Humidity
JIS-C-7021
:B-11
Storage
High
Temperature
Storage
Ta=+85
RH=80% ~ 85%
0/22
0/22
Test Time=1,000hrs
¢J¡Ó5¢J
High Ta=+120
JIS-C-7021
:B-10
Test Time=1,000hrs
JIS-C-7021
:B-12
Storage
Result
¢J¡Ó5¢J
MIL-STD-883:1008
Low
Temperature
Test Conditions
Low Ta=-40
¢J¡Ó5¢J
Test Time=1,000hrs
*Failure Criteria:
¡Ù10%
2. IV decline ¡Ù30%
1. VF arise
3. A failure is an LED that is open or shorted
7
0/22
0/22
2DEVICE NO:HPLB-59K15xW
2RELIABILITY TEST
Ø
Environmental Test
Test Item
Reference Standard
MIL-STD-202:107D
Temperature
MIL-STD-750:1051
Cycling
MIL-STD-883:1010
JIS-C-7021
Thermal
Shock
:A-4
Test Conditions
-40
Result
¢J ~ +25¢J ~ +85¢J ~ +25¢J
60min
20min
60min
20min
0/22
Test Time=200cycle
¢J¡Ó5¢J ~ +110¢J¡Ó5¢J
MIL-STD-202:107D
-40
MIL-STD-750:1051
20min
MIL-STD-883:1010
Test Time=200cycle
*Failure Criteria:
¡Ù10%
2. IV decline ¡Ù30%
1. VF arise
3. A failure is an LED that is open or shorted
8
20min
0/22
2DEVICE NO:HPLB-59K15BW
2TYPICAL ELECTRICAL OPTICAL CHARACTERISTICS CURVES
1600
FORWARD CURRENT (mA)
FORWARD CURRENT (mA)
2000
1600
1200
800
400
1200
800
400
0
0
6
8
10
12
14
16
20
1.2
Relative luminousity
Relative luminousity
J -A
J -A
J -A
J -A
40
=60
=50
=40
=30
o
o
o
o
C/W
C/W
C/W
C/W
60
80
100
120 140
160
1.4
1.0
0.8
0.6
0.4
0.2
0
£c
£c
£c
£c
AMBIENT TEMPERATURE( C)
FORWARD VOLTAGE (V)
0
R
R
R
R
1.2
1.0
0.8
0.6
0.4
0.2
400
800
1200
1600
0
-20
2000
0
20
40
60
80
100 120
Ambient temperature( C)
Forward current (mA)
9
2DEVICE NO:HPLB-59K15BW
2TYPICAL ELECTRICAL OPTICAL CHARACTERISTICS CURVES
O
Ta=25 C
0.03
0.008
Chromaticity Coordinate
Chromaticity Coordinate
0.006
0.02
Cy
0.01
Cx
0
0.004
0.002
0
-0.002
-0.004
-0.01
-0.006
-0.008
-0.02
-0.03
0
600
1200
1800
2400
-0.010
-0.012
-40
2800
-20
0
20
RELATIVE RADIANT INTENSITY
O
1.2
40
60
80
100
Ambient Temperature( o C)
Forward Current
Ta=25 C
0
10
20
30
1.0
0.8
40
0.6
50
1.0
60
0.4
70
0.8
0.2
80
90
0
400 450 500 550 600 650 700 750
0.2
0.5
1/2 POWER
WAVELENGTH (nm)
VIEW ANGLE Ta=25
10
O
C
2DEVICE NO:HPLB-59K15xW
2 Cool White Color Bin Selection
CCT(°K)
Chromaticity Coordinates
TYP
x
0.274
0.303
0.311
0.290
y
0.301
0.333
0.293
0.270
8000
Tolerance
x ± 0.02
y ± 0.02
2 Cool White CIE Light Color Chart
0.360
0.350
0.340
0.330
0.320
0.310
0.300
0.290
0.280
0.270
11
0.330
0.320
0.310
0.300
0.290
0.280
0.270
0.260
0.250
0.250
0.260
2DEVICE NO:HPLB-59K15xW
2 Pure White Color Bin Selection
CCT(°K)
Chromaticity Coordinates
TYP
x
0.301
0.329
0.329
0.311
y
0.342
0.369
0.310
0.293
6000
Tolerance
x ± 0.02
y ± 0.02
2 Pure White CIE Light Color Chart
0.390
0.380
0.370
0.360
0.350
0.340
0.330
0.320
0.310
0.300
0.290
12
0.340
0.330
0.320
0.310
0.300
0.290
0.280
0.280
2DEVICE NO:HPLB-59K15xW
2 Nature White Color Bin Selection
CCT(oK)
Chromaticity Coordinates
TYP
x
0.367
0.420
0.396
0.357
y
0.400
0.432
0.367
0.342
4000
Tolerance
x ± 0.02
y ± 0.02
2 Nature White CIE Light Color Chart
0.450
0.440
0.430
0.420
0.410
0.400
0.390
0.380
0.370
0.360
0.350
0.340
0.430
0.420
0.410
0.400
0.380
13
0.390
0.370
0.360
0.350
0.320
0.340
0.330
2DEVICE NO:HPLB-59K15xW
2 Warm White Color Bin Selection
CCT(K)
Chromaticity Coordinates
TYP
x
0.402
0.454
0.429
0.416
0.410
0.383
y
0.423
0.446
0.394
0.389
0.374
0.360
3500
Tolerance
x ± 0.02
y ± 0.02
2 Warm White CIE Light Color Chart
0.460
0.450
0.440
0.430
0.420
0.410
0.400
0.390
0.380
0.370
0.360
14
0.470
0.460
0.450
0.440
0.430
0.350
2DEVICE NO:HPLB-59K15BW
2POSITION EXPLANATION:
Fixed orifice
Power Line
Power Line
Heat conduction
paste
Radiation organization
2 Conclusion
Huey Jann provide simple comparison table for High Power LED, you could find your
request heat dissipation area from the following table.
Free Convection Horizontal
Free Convection
Flat Heat Dissipation-Set-up
Vertical Flat Heat Dissipation-Set-up
2
2
( Area Require mm )
15W
Free Convection
2
( Area Require mm )
31,500
( Area Require mm )
26,000
15
Finned Heat Dissipation-Set-up
80,500
2DEVICE NO:HPLB-59K15xW
2 PRODUCT APPLICATION
Radiation organization
16
2DEVICE NO:HPLB-59K15xW
215W Operating Instructions
1. It important to keep away the product from
2. When making use of products, it is necessary
water, in order to avoid the product electronic
to use anti-ESD devices to prevent destructive
characteristics to be harmful.
electronic characteristics.
High temperature
Convection effect
Above 90 oC
Above 150 oC
¢X
3. It should be noticed whether there is 4. There is 150 C directly from the front of 15W
convection in design of device. Convection has
emitting diode. It is untouchable to prevent
to exist.
burning.
17
2DEVICE NO:HPLB-59K15xW
215W Operating Instructions
Keep Insulation
+
-
Power Supply
5. The material in the central top of 15W LED is 6. In the bottom of heat sink cannot be touched
soft.
Therefore,
it
is
un-squeezable
and
untouchable.
with neither positive nor negative pole. (Heat
sink has to be insulation.)
7. The product should not be light up directly
without heat dissipation device.
18