Alan Fletcher, Chair
[email protected]
Future, Vice-Chair
FutureVice-Chair.com
Sue Oeltjen, Secretary
DRAFT
[email protected]
AGENDA
Ellen Fletcher, Editorial Consultant
Forty-seventh Meeting
[email protected]
SAE AMS POLYMERIC MATERIALS COMMITTEE (AMS P)
Thursday, April 28, 2015
New Orleans, Louisiana USA
P. 1
P. 2
P. 3
P. 4
4.1
WELCOME and INTRODUCTIONS
Chairman Alan Fletcher will open the 47th meeting of the Polymeric Materials Committee (AMS P) and
make any special announcements. SAE Technical Committee Members act as individuals and not as
agents or representatives of their employers. Audio or video recording of meetings is not permitted.
All electronic devices will be placed on silence, please.
APPROVAL OF PREVIOUS MEETING MINUTES
Members and guests are requested to approve the Minutes of the 46th meeting held fall 2015 in
Honolulu, Hawaii. Any corrections or comments should be offered at this time.
MEMBERSHIP
Any membership changes made since the last meeting may be reported at this time.
PRESENTATIONS / DISCUSSIONS
Technical presentations / discussions of general interest, not necessarily related to other agenda items.
TBD – TBD / TBD
Thursday, October 29, 9:00 a.m.
P. 5
5.1
5.2
P. 6
SAE REPORTS
Staff: Kerri Rohall [email protected]
Editorial: Mrs. Ellen Fletcher [email protected]
PROJECTS / SUBCOMMITTEES
 Discuss subcommittee membership and document sponsors.
6.1 PTFE / Plastics Group: Chair Ron Zielinski, Polymod
Jason Adams, Chris Armellini, Dan Garrett, Stephen James, Manuel Koucouthakis, Mike McCabe,
Brooks Holt, Ben Shaw, Alan Schofield
6.2 Cloth / Fabrics / Fibers Group: Chair Mike McCabe, Seal Science
Gregg Bogucki, Manuel Koucouthakis
6.3 General Materials Group: Chair Al Fletcher, AFRL
Chris Armellini, Gregg Bogucki
P. 7
WORKS IN PROGRESS - Subcommittee preparation needing committee action.
7.1 PTFE / Plastics Group (See P.6.1)
DOCUMENT
AMS3670C
TITLE
DATE STATUS SPONSOR
Polyamide-Imide Bar, Rod, and Shapes, Molded Or
Extruded
3/4/03
5/17/11
RA
WIP
HISTORY
R. Hilblom 5/11 WIP
11/11 -5/14 28D Ballot/
1 Disapproval/Resolve
Comments /Add types
5/8/14 Submitted ballot
10/23/14 Feedback
5/14/15 Still in progress,
almost complete with a few
comments
10/29/15 Need new sponsor,
Ron or Richard
4/28/16 UPDATE
Page 1
SAE 2016 AMS P AGENDA Spring
P. 7
7.1
WORKS IN PROGRESS - Subcommittee preparation needing committee action.
PTFE / Plastics Group (See P.6.1)
DOCUMENT
TITLE
DATE STATUS SPONSOR
RA
WIP
HISTORY
AMS3670/1C
Unfilled Polyamide-Imide Bar, Rod, and Shapes
6/30/04
5/17/11
AMS3670/2C
Polyamide-Imide Bar, Rod, and Shapes 20 Graphite-3
Polytetrafluoroethylene (PTFE) Filled
1/6/06
5/17/11
RA
WIP
Same as AMS3670
AMS3670/3C
Polyamide-Imide Bar, Rod, and Shapes, 12% Graphite 3% Polytetrafluoroethylene Filled
6/30/04
5/17/11
RA
WIP
Same as AMS3670
AMS3670/4D
Polyamide-Imide Bar, Rod, and Shapes, 30% Glass Fiber
12/1/00
5/17/11
RA
WIP
Same as AMS3670
AMS3670/5D
Polyamide-Imide Bar, Rod, and Shapes, 30% Carbon Fiber
12/1/00
5/17/11
RA
WIP
Same as AMS3670
P11AA
Polyetheretherketone (PEEK) Moldings and Extrusions
Unfilled and Filled
10/23/14 Perform machine
part testing.
5/14/15 Still in progress,
almost complete with a few
comments
10/29/15 Need new sponsor,
Ron or Richard
4/28/16 UPDATE
Feb 15,
2011
S. James 2/15/11 WIP
(R. Hilblom) 5/13-5/14 Roundrobin testing:
data for revision. Unspecified
types default statement.
10/13 Ron Z check progress
5/8/14 No Progress
10/23/14 No progress
5/14/15 Steve to start this
after polyimide documents
are complete
10/29/15 No progress
4/28/16 UPDATE
P12AA
P. 7
7.2
Unfilled Polyamide-Imide Bar, Rod, and Shapes
WORKS IN PROGRESS - Subcommittee preparation needing committee action.
Cloth / Fabrics / Fibers Group (See P.6.2)
DOCUMENT
AMS3799C
P. 7
7.3
R. Hilblom 10/5/12 WIP
4/28/16 UPDATE
TITLE
DATE STATUS SPONSOR
Jan 06,
2006
Webbing, Tubular, Low Modulus Aramid-54
RA
M. McCabe
HISTORY
PUBLISHED
WORKS IN PROGRESS - Subcommittee preparation needing committee action.
General Materials Group (See P.6.3)
DOCUMENT
AMS3572B
TITLE
DATE STATUS SPONSOR
Resin Polyurethane, Foam-In-Place, Rigid (NONCURRENT
Oct 1992)
Oct 01,
1992
Noncurrent
HISTORY
A. Fletcher 3/3/03 WIP Cancel
Waiting for 28 D Ballot
7/9/04 WIP Cancel
SAE
28 D Ballot
4/11 5Y Review
10/11 To be Canceled
4/12 Change Sponsor: Al F.
4/24/125/8/14 Used old
Ballot/Format/ASC
5/12 Kerri to Check & Reply
10/12 No Progress
5/13 No Progress
10/13 Kerri to check on
progress – Has been sent out
for formatting.
5/8/14 Sponsor says,
“Lost in SAE since
4/21/12…”
10/23/14 Kerri check
5/14/15 Lost in the SAE web
editors. Kerri to follow-up
on this
10/29/15 Kerri to cancel
4/28/16 UPDATE
AMS3684B
Resin, Polyimide, Sealing High-Temperature Resistant,
315Mdc (600Mdf) Unfilled (NONCURRENT Jan 1993)
Page 2
Jan 01,
1993
Noncurrent
A. Fletcher
Same as AMS3572
SAE 2016 AMS P AGENDA Spring
P. 7
7.3
WORKS IN PROGRESS - Subcommittee preparation needing committee action.
General Materials Group (See P.6.3)
DOCUMENT
AMS3731B
TITLE
DATE STATUS SPONSOR
Potting Compound, Epoxy, Bisphenol A-Type
(NONCURRENT Jan 1993)
HISTORY
1/1/93
NC
NC
Same as AMS3731
A. Fletcher
Waiting for
SAE
4/11/12 WIP- Cancel
10/12 Awaiting SAE
5/13 No Progress
10/13 should be canceled or
stabilized with a health warning
5/8/14 Sponsor says, “Waiting
since 10/12 for a cancellation
notice from SAE to do a 28D
Ballot…”
10/23/14 Sponsor Cancel
5/14/15 Al to put in for a
cancelation of the standard
10/29/15 Al needs
cancellation notice
4/28/16 UPDATE
AMS3731/10B
Potting Compound, Epoxy, Bisphenol A-Type, Unfilled,
Room Temperature Cure, Semiflexible (NONCURRENT
Jan 1993)
1/1/93
AMS3731/1B
Potting Compound, Epoxy, Bisphenol A-Type, Unfilled,
Room Temperature Cure (NONCURRENT Jan 1993)
1/1/93
NC
Same as AMS3731
AMS3731/2C
Potting Compound, Epoxy, Bisphenol A-Type, Filled, Heat
Cure, Low Cte, Thermal Shock Resistant (NONCURRENT
Jan 1993)
1/1/93
NC
Same as AMS3731
AMS3731/3B
Potting Compound, Epoxy, Bisphenol A-Type, Filled, Heat
Cure, Machinable (NONCURRENT Jan 1993)
1/1/93
NC
Same as AMS3731
AMS3731/4B
Potting Compound, Epoxy, Bisphenol A-Type, Impregnating
Resin, Heat Cure, Single Component (NONCURRENT Jan
1993)
1/1/93
NC
Same as AMS3731
AMS3731/5B
Potting Compound, Epoxy, Bisphenol A-Type, Filled, Room
Temperature Cure, Low Exotherm (NONCURRENT Jan
1993)
1/1/93
NC
Same as AMS3731
AMS3731/6B
Potting Compound, Epoxy, Bisphenol A-Type, Syntactic
Foam, Heat Cure (NONCURRENT Jan 1993)
1/1/93
NC
Same as AMS3731
AMS3731/7B
Potting Compound, Epoxy, Bisphenol A-Type, Filled, Room
Temperature Cure, Low Shrinkage (NONCURRENT Jan
1993)
1/1/93
NC
Same as AMS3731
AMS3731/8B
Potting Compound, Epoxy, Bisphenol A-Type, Filled, Heat
Cure, High Hdt (NONCURRENT Jan 1993)
1/1/93
NC
Same as AMS3731
AMS3731/9B
Potting Compound, Epoxy, Flexible, Thermal Shock
Resistant, Heat Cure (NONCURRENT Jan 1993)
1/1/93
NC
Same as AMS3731
P. 8
DOCUMENTS IN WORK &/or WAITING FOR PROGRESS
Sponsor assigned, New Project Request (NPR) form needed / Documents from or for Other Committees, etc.
8.1
PTFE / Plastics Group
DOCUMENT
TITLE
DATE STATUS SPONSOR
AMS2491E
Surface Treatment of Polytetrafluoroethylene (PTFE),
Preparation for Bonding
Sep 28,
2009
AMS3644G
Plastic: Polyimide, for Molded Rod, Bar, and Tube, Plaque,
and Formed Parts
Sep 22,
2006
HISTORY
RV
A. Schofield
RV
B. Taslakian 10/11 5Y Review
5/8/14 No report
10/23/14 WIP form, change
sponsor . Kerri-to make
system change
5/14/15 No update
10/29/15 Needs NPR
4/28/16 UPDATE
P. 8
DOCUMENTS IN WORK &/or WAITING FOR PROGRESS
Sponsor assigned, New Project Request (NPR) form needed / Documents from or for Other Committees, etc.
8.2
Cloth / Fabrics / Fibers Group
DOCUMENT
TITLE
DATE STATUS SPONSOR
Page 3
HISTORY
SAE 2016 AMS P AGENDA Spring
P. 8
DOCUMENTS IN WORK &/or WAITING FOR PROGRESS
Sponsor assigned, New Project Request (NPR) form needed / Documents from or for Other Committees, etc.
8.3
General Materials Group
DOCUMENT
TITLE
DATE STATUS SPONSOR
Coating Material, Phenolic Resin, Ptfe Filled Pigmented,
150Mdc (302Mdf) Cure
May 26,
2005
Reaffirmed
Polyester Film, Electrical Grade, General Purpose
10/28/10
RV
G. Bogucki
AMS3613D
Film, Copper Clad Polyester
11/5/10
RV
G. Bogucki
AMS3619D
Resin, Polyimide, Laminating High Temperature Resistant,
315 °C (599 °F)
11/5/10
RV
G. Bogucki
AMS3704A
Adhesive, Contact Polychloroprene (Cr) Rubber, Resin
Modified
Sep 01,
1998
RA
K. Rohall
AMS3136E
K. Rohall
HISTORY
4/11 5Y Review
10/11 Transfer G-8
5/8/14 No progress
10/23/14 Kerri Dec 2014
5/14/15 Need to be
transferred to G-8
10/29/15 No update
4/28/16 UPDATE
AMS3612C
10/11 5Y Review
5/12 Reaffirm
5/8/14 No progress
10/23/14 Kerri Dec 2014
5/14/15 Needs to be
Reaffirmed
10/29/15 No update
4/28/16 UPDATE
Microspheres, Carbon, Hollow
7/10/09
RV
M.Koucouthakis
AMS3755C
Powder, Fumed Silicon Dioxide
7/20/09
RV
A.Schofield
10/29/15 Al S to sponsor
AMS3755/1A
Powder, Fumed Silicon Dioxide, Thickening Efficiency 120
3/4/03
RA
A.Schofield
4/11 5Y Review AF
10/11 Reaffirm
5/8/14 No progress
10/23/14 Kerri Dec 2014
5/14/15 Needs to be
Reaffirmed
10/29/15 Al S to sponsor
Powder, Fumed Silicon Dioxide, Thickening Efficiency 95
3/4/03
RA
Wipes, Cotton, Loosely Woven
Oct 01,
1997
RA
AMS3753B
4/28/16 UPDATE
4/28/16 UPDATE
AMS3755/2A
A.Schofield
4/11 5Y Review AF
10/11 Reaffirm
5/8/14 No progress
10/23/14 Kerri Dec 2014
5/14/15 Needs to be
Reaffirmed
10/29/15 Al S to sponsor
4/28/16 UPDATE
AMS3803A
K. Rohall
4/11 5Y Review AF
10/11 Reaffirm
5/8/14 No progress
10/23/14 Kerri Dec 2014
5/14/15 Needs to be
Reaffirmed
10/29/15 No update
4/28/16 UPDATE
AMSC81986
Core Material, Plastic Honeycomb, Nylon Paper Base; for
Aircraft Structural Applications
Jul 01,
1998
Issued
K. Rohall
4/11 5Y Review
10/11 Transfer P17
5/8/14 No progress
10/23/14 Kerri Dec 2014
5/14/15 Needs to be
transferred to P17
10/29/15 No update
4/28/16 UPDATE
AMSDTL23053 Insulation Sleeving, Electrical, Heat Shrinkable, General
Specification For
Jul 01,
1999
Issued
K. Rohall
4/11 5Y Review
10/11 Transfer AE-8
5/8/14 No progress
10/23/14 Kerri Dec 2014
5/14/15 Needs to be
transferred to AE-8
10/29/15 No update
4/28/16 UPDATE
AMSI23053/2
Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinyl
Chloride, Flexible, Crosslinked and Non-Crosslinked
Jun 01, 2000
I
K. Rohall
See AMSDTL23053
AMSI23053/3
Insulation Sleeving, Electrical, Heat Shrinkable, Polyvinyl
Chloride, Semi Rigid, Crosslinked and Non-Crosslinked
Jun 01, 2000
I
K. Rohall
See AMSDTL23053
Page 4
SAE 2016 AMS P AGENDA Spring
P. 8
DOCUMENTS IN WORK &/or WAITING FOR PROGRESS
Sponsor assigned, New Project Request (NPR) form needed / Documents from or for Other Committees, etc.
8.3
General Materials Group
DOCUMENT
AS81765
TITLE
DATE STATUS SPONSOR
Insulating Components, Molded, Electrical, Heat
Shrinkable, General Specification For
Feb 13,
2002
I
K. Rohall
HISTORY
4/11 5Y Review AF
Transfer to AE-8
Still listed on Document List
5/8/14 No progress
10/23/14 Kerri Dec 2014
5/14/15 Need to be
transferred to AE-8
10/29/15 No update
4/28/16 UPDATE
AS81765/1
Insulating Components, Molded, Electrical, Heat Shrinkable
Polyolefin, Crosslinked, Semi-Rigid and Flexible
Feb 13, 2002
AS81765/2
Insulating Components, Molded, Electrical, Heat Shrinkable
Polychloroprene, Flexible, Crosslinked
Feb 13, 2002
I
Same as AS81765
AS81765/3
Insulating Components, Molded, Electrical, Heat Shrinkable
Silicone Rubber, Flexible, Crosslinked
Feb 13, 2002
I
Same as AS81765
AS81765/4
Insulating Components, Molded, Electrical, Heat Shrinkable
Fluoroelastomer, Flexible, Crosslinked
Feb 13, 2002
I
AS81765/6
Insulating Components, Molded, Electrical, Heat Shrinkable
Fluoropolymer, Semi-Rigid, Crosslinked
Feb 13, 2002
I
Same as AS81765
AS81765/7
Insulating Components, Molded, Electrical, Heat Shrinkable
Fluoropolymer Composite, Semi-Rigid, Crosslinked
Feb 13, 2002
I
Same as AS81765
I
Same as AS81765
K. Rohall
Same as AS81765
P. 9
OLD BUSINESS
9.1 No old business
P. 10 NEW BUSINESS
10.1 Five Year Review (Active Documents Awaiting Sponsor Appointment)
10.1.1
PTFE / Plastics Group
DOCUMENT
TITLE
DATE STATUS SPONSOR
HISTORY
P. 10 NEW BUSINESS
10.1 Five Year Review (Active Documents Awaiting Sponsor Appointment)
10.1.2
Cloth / Fabrics / Fibers Group
DOCUMENT
TITLE
DATE STATUS SPONSOR
AMS3801/4B
Cloth, Parachute, Meta-Aramid, Low Modulus, 7.0 (237) Weight, Plain
Weave
6/23/11
RV
AMS3801/1B
Cloth, Parachute, Meta-Aramid, Low Modulus, 4.7 (159) Weight, Twill
6/23/11
RV
AMS3801/2B
Cloth, Parachute, Meta-Aramid, Low Modulus, 6.5 (220) Weight, Special
Weave
6/23/11
RV
AMS3801/3B
Cloth, Parachute, Meta-Aramid, Low Modulus, 12.0 (407) Weight, Special
Weave
6/23/11
RV
AMS3801/4B
Cloth, Parachute, Meta-Aramid, Low Modulus, 7.0 (237) Weight, Plain
Weave
6/23/11
RV
AMS3801/5B
Cloth, Parachute, Meta-Aramid, Low Modulus, 18.0 (610) Weight, Basket
Weave, Resin Treated
6/23/11
RV
AMS3801C
Cloth, Parachute - Meta-Aramid, Low Modulus
6/23/11
RV
HISTORY
P. 10 NEW BUSINESS
10.1 Five Year Review (Active Documents Awaiting Sponsor Appointment)
10.1.3
General Materials Group
DOCUMENT
P. 10.2 Future Meetings
FALL 2016
San Diego, California
TITLE
DATE STATUS SPONSOR
SPRING
TBD
Page 5
2017
HISTORY
FALL
2017
TBD
SAE 2016 AMS P AGENDA Spring
P.11
11.1
ACTIVE DOCUMENTS (Reaffirmed / Revised / Issued)
PTFE / Plastics Group
/
DOCUMENT
TITLE
DATE STATUS SPONSOR
AMS2515F
Polytetrafluoroethylene (Ptfe) Resin Coating, Low Build, 370-400Mdc (698752Mdf) Fusion
1/25/13
RV
AMS2516D
Polytetrafluoroethylene (Ptfe) Resin Coating, High Build, 370-400Mdc (698752Mdf) Fusion
Mar 13,
20013
RV
AMS2491E
Surface Treatment of Polytetrafluoroethylene (PTFE), Preparation for
Bonding
Sep 28,
2009
RV
AMS3612C
Polyester Film, Electrical Grade, General Purpose
10/28/10
RV
AMS3613D
Film, Copper Clad Polyester
11/5/10
RV
AMS3799/2C
Webbing, Tubular, Low Modulus Aramid 3/4 (19) Wide, 2300 (10,231)
Breaking Strength
Jul 19,
2013
RV
AMS3799/3C
Webbing, Tubular, Low Modulus Aramid 1 (25) Wide, 4000 (17,793)
Breaking Strength
Jul 19,
2013
RV
AMS3799/4C
Webbing, Tubular, Low Modulus Aramid 3-3/16 (81) Wide, 2250 (10,008)
Breaking Strength
Jul 19,
2013
RV
HISTORY
P.11
ACTIVE DOCUMENTS (Reaffirmed / Revised / Issued)
11.2 Cloth / Fabrics / Fibers Group
DOCUMENT
TITLE
DATE STATUS SPONSOR
AMS3806E
Cloth, Airplane, Mercerized Cotton, 80 Pounds Force (356 N) Breaking
Strength
P.11
11.3
ACTIVE DOCUMENTS (Reaffirmed / Revised / Issued)
General Materials Group
DOCUMENT
TITLE
Nov 27,
2013
HISTORY
RV
DATE STATUS SPONSOR
AMS3619D
Resin, Polyimide, Laminating High Temperature Resistant, 315 °C (599 °F)
11/5/10
RV
AMS3753B
Microspheres, Carbon, Hollow
7/10/09
RV
AMS3755C
Powder, Fumed Silicon Dioxide
7/20/09
RV
HISTORY
P.12
DOCUMENTS
12.1 To Be Stabilized
DOCUMENT
DATE
STATUS
AMS3653E
Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluroethylene (Ptfe)
Jan 01, 1999
Reaffirmed
AMS3654C
Tubing, Electrical Insulation Light Wall, Extruded Polytetrafluorethylene (Ptfe)
Jan 01, 1999
Reaffirmed
AMS3655B
Tubing, Electrical Insulation, Thin Wall, Extruded Polytetrafluoroethylene (
Jan 01, 1999
Reaffirmed
Adhesive, Electrically Conductive, Silver-Filled Epoxy Resinp11aa
May 31, 2005
Reaffirmed
AMS3718/1A
Webbing, Woven Nylon for Decelerators 3/4 (19) Wide, 3000 (13,350) Breaking Strength (NONCURRENT Jan 1993
Jan 01, 1993
Noncurrent
AMS3718/2A
Webbing, Woven Nylon for Decelerators 1 (25) Wide, 4000 (17,800) Breaking Strength (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3718/3A
Webbing, Woven Nylon for Decelerators 1 (25) Wide, 6000 (26,700) Breaking Strength (NONCURRENT Jan 1993
Jan 01, 1993
Noncurrent
AMS3718/4A
Webbing, Woven Nylon for Decelerating 1-23/32 (43) Wide, 8700 (38,700) Breaking Strength (NONCURRENT Jan 1993
Jan 01, 1993
Revised
AMS3718/5A
Webbing, Woven Nylon for Decelerators 1 (25) Wide, 9000 (40,000) Breaking Strength (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3718/6A
Webbing, Woven Nylon for Decelerators 1-3/4 (44) Wide, 10,000 (44,500) Breaking Strength (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3718B
Webbing, Woven Nylon for Decelerators
Jan 06, 2006
Reaffirmed
AMS3779A
Tape, Adhesive, Pressure-Sensitive, Thermal Radiation Resistant
Apr 01, 1994
Reaffirmed
AMS3779/1A
Tape, Adhesive, Pressure-Sensitive, Thermal Radiation Resistant, Aluminum Foil/Glass Cloth
Apr 01, 1994
Reaffirmed
AMS3779/2A
Tape, Adhesive, Pressure-Sensitive, Thermal Radiation Resistant, Aluminum Coated Glass Cloth
Apr 01, 1994
Reaffirmed
AMS3787/1A
Thread, Para-Aramid Intermediate Modulus 10,000 Yards Per Pound (20,159 M/Kg), 16 Pounds Force (71 N) Breaking Strength
Jan 01, 2001
Reaffirmed
AMS3787/2A
Thread, Para-Aramid Intermediate Modulus 6700 Yards Per Pound (13,507 M/Kg), 25 Pounds Force (111 N) Breaking Strength
Jan 01, 2001
Reaffirmed
AMS3787/3A
Thread, Para-Aramid Intermediate Modulus 5000 Yards Per Pound (10,080 M/Kg), 35 Pounds Force (156 N) Breaking Strength
Jan 01, 2001
Reaffirmed
AMS3787/4A
Thread, Para-Aramid Intermediate Modulus 3350 Yards Per Pound (6753 M/Kg), 50 Pounds Force (222 N) Breaking Strength
Jan 01, 2001
Reaffirmed
AMS3787/5A
Thread, Para-Aramid Intermediate Modulus 2000 Yards Per Pound (4032 M/Kg), 80 Pounds Force (356 N) Breaking Strength
Jan 01, 2001
Reaffirmed
AMS3787/6A
Thread, Para-Aramid Intermediate Modulus 950 Yards Per Pound (1915 M/Kg), 150 Pounds Force (667 N) Breaking Strength
Jan 01, 2001
Reaffirmed
AMS3787/7A
Thread, Para-Aramid Intermediate Modulus 850 Yards Per Pound (1714 M/Kg), 175 Pounds Force (778 N) Breaking Strength
Jan 01, 2001
Reaffirmed
AMS3787/8A
Thread, Para-Aramid Intermediate Modulus 500 Yards Per Pound (1008 M/Kg), 225 Pounds Force (1001 N) Breaking Strength
Jan 01, 2001
Reaffirmed
AMS3681C
TITLE
Page 6
SAE 2016 AMS P AGENDA Spring
P.12
DOCUMENTS
12.1 To Be Stabilized
DOCUMENT
DATE
STATUS
AMS3787A
Thread, Para-Aramid Intermediate Modulus
Jan 01, 2001
Reaffirmed
AMS3794A
Thread, Aramid, Spun Staple (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3795/1A
Webbing, Woven Nylon Fabric 6000 Pounds (26,700 N), 1.8 Ounces/Yard (56 G/M) (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3795/2A
Webbing, Woven Nylon Fabric 9000 Pounds (40,050 N), 2.5 Ounces/Yard (77.5 G/M) (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3795/3A
Webbing, Woven Nylon Fabric 12,000 Pounds (53,400 N), 3.3 Ounces/Yard (102.5 G/M) (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
Webbing, Woven Nylon Fabric (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3796/1A
Webbing, Nylon, Aircraft Arresting, 105,000 Pounds (467 Kn) (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3796/2A
Webbing, Nylon, Aircraft Arresting, 130,000 Pounds (578 Kn) (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3796/3A
Webbing, Nylon/Polyester, Aircraft Arresting, Center Pick, 130,000 Pounds (578 Kn) (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3796A
Webbing, Nylon, Aircraft Arresting (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3800A
Cloth, Knitted, Polyamide, High Temperature Resistant Reverse Jersey (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3802E
Cloth, Airplane, Cotton, Mercerized, 50 Pounds (220 N) Breaking Strength (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3804D
Cloth, Airplane, Cotton, Mercerized, 65 Pounds (290 N) Breaking Strength (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3807B
Tape, Aluminum Foil, Sound and Vibration Damping Pressure Sensitive Adhesive
Jan 06, 2006
Reaffirmed
AMS3811B
Rods, Aramid Fiber, Polyester Resin Coated, Pultrusion
Aug 01, 1998
Reaffirmed
AMS3812B
Rods, Glass Fiber, Polyester Resin, Coated, Pultrusion
Sep 01, 1998
Reaffirmed
AMS3813/1A
Rope, Aramid Fiber, Jacketed, Cabled Strand, Extruded Jacket
Sep 01, 1998
Reaffirmed
AMS3813/2A
Rope, Aramid Fiber, Jacketed - Parallel Strand, Extruded Jacket
Sep 01, 1998
Reaffirmed
AMS3813/3A
Rope, Aramid Fiber, Jacketed, Parallel Yarn, Braided Jacket
Sep 01, 1998
Reaffirmed
AMS3813A
Rope, Aramid Fiber, Jacketed, for Antenna-Support Systems
Sep 01, 1998
Reaffirmed
AMS3815D
Braid, Flat, Nylon, Electrical Tying Synthetic Rubber Coated (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3816C
Braid, Flat, Nylon, Electrical Tying Wax Coated (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3817D
Nylon Braid, Flat Electrical Tying, Resin Coated
Sep 01, 1998
Reaffirmed
AMS3818A
Braid, Flat, Polyester, Lacing and Tying Synthetic Rubber Coated, Low Outgassing (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3841A
Cloth, Cotton Twill, Fire Retardant Treated (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3856/1A
Cloth, Upholstery, Flame Resistant Novoloid/Aramid, Waffle Type Weave (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3856/2A
Cloth, Upholstery, Flame Resistant Aramid, Plain Weave (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3856/3A
Cloth, Upholstery, Flame Resistant Nylon, Jacquard Weave (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3856A
Cloth, Upholstery, Flame Resistant (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3870D
Ceramic Moldings and Extrusions, Dense Ultra-High Alumina (99% Al203) (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMS3880C
Crystallized Glass Ceramic (NONCURRENT Jan 1993)
Jan 01, 1993
Noncurrent
AMSA8576
Adhesive, Acrylic Base, for Acrylic Plastic
Jun 10, 2005
Reaffirmed
AMSF24610
Fixant, Hold Down
Jan 06, 2006
Reaffirmed
AMSG25667
Glass, Monolithic, Aircraft Glazing
Jan 06, 2006
Reaffirmed
AMSG25871
Glass, Laminated, Aircraft Glazing
Jan 06, 2006
Reaffirmed
Insulating Compound, Electrical, Ceramic, Class L
Sep 01, 2000
Issued
Insulation, Electrical, Pasted-Mica
Jun 01, 1999
Issued
Plastic Rods and Tubes, Polyethylene
Jun 01, 1999
Issued
Paper, Recording, Heat Sensitive
Jun 01, 1999
Issued
AMSP29609
Polyimide Retainer Material, Porous Non-Metallic
Apr 01, 2001
Issued
AMSP83310
Plastic Sheet, Polycarbonate, Transparent
Mar 01, 1998
Issued
Shims, Molded, Filled Resin Compound and Sheet Prepreg
Sep 29, 2010
Revised
Foam, Rigid, Structural, Closed Cell
Feb 11, 2003
Issued
Tape and Sheet, Adhesive, Rubber and Cork Composition
Sep 01, 1998
Issued
AMST21595
Tapes, Pressure-Sensitive Adhesive, Masking, Non-Staining - for Aircraft Painting Applications
Sep 01, 1998
Issued
AMST22085
Tapes, Pressure-Sensitive, Adhesive, Preservation and Sealing
Jun 01, 1999
Issued
AMST23397
Tapes, Pressure Sensitive Adhesive, for Masking During Paint Stripping Operations
Jul 01, 1998
Issued
AMS3795A
AMSI10
AMSI538
AMSP21922
AMSP22968
AMSS83474A
AMSPRF46194A
AMST6841
P.13
TITLE
ADJOURNMENT
Page 7
SAE 2016 AMS P AGENDA Spring