LED: A step-by-step formula for mastering Energy Efficient Lighting Creating the optimal solution for any LED application requires balance and synergy between several critical disciplines (including power sources or drivers, LED emitters, thermal management, secondary optics, housings, or enclosures) that ultimately make up our innovation in LED outdoor site and street lighting products. The developments of new high powered LED products and technologies have become a driving force in the architectural lighting industry. Today, outdoor lighting applications in pedestrian scale (mounting to heights of 12’ – 16’) have now become practical. 2041 58th Avenue Circle East . Bradenton, FL 34203 . P 941.755.6694 . www.beaconproducts.com A Brief History On LED Technology: LED (light emitting diode) technology has been widely used in many consumer products for nearly four decades. The most common use for LED has been in indicator lights. The high brightness and point-source characteristics of LEDs have allowed them to be widely accepted in the traffic signal and automotive industry (tail lights). Although the brightness of LEDs have made them a good alternative to HID, CFL and incandescent lamps in signalling devices, they have previously lacked the lumen output and optical control required for general illumination. Early efforts to utilize LEDs for general illumination raised the awareness of this technology, but the narrow beam distribution and unfounded claims of 100,000+ hour life delayed the understanding and full acceptance of LEDs being used for outdoor area lighting. Recent Developments: Until recently, the light output of LED sources made the technology an inefficient choice for outdoor area lighting. However, the recent increases in LED efficiency coupled with Beacon Products’ patent pending LED reflector system have made LEDs an obvious choice for lighting public spaces™. The Time Is Now: Like other technologies, LEDs will continue to evolve and increase in efficiency, decrease in cost and become more widely accepted for use in outdoor area lighting. Recent improvements in the range of color temperatures available, lumens per watt and optical control are solid benefits that can make a real difference today. Beacon 48w LED village2 post top BEACON’S PHILOSOPHY An Indirect Approach: In raw form, LED lenses control the distribution of light. But because most LED lenses have been designed to distribute light in narrow beams, most manufactures attempting to use LED sources for area lighting physically rotate large linear arrays of LEDs to achieve light at higher angles. By rotating the LEDs, the unshielded brightness results in high levels of glare. Glare has been known to limit the viewer’s ability to see the lighted road or pathway, which can lead to an unsafe condition. Instead of using large, angled linear LED arrays to produce the light required for area lighting, Beacon has developed a stateof-the-art indirect reflector system to harness the concentrated light from the LEDs and apply the lumens exactly where they are needed. The approach allows for superior optical control, 4:1 pole spacing and little to no glare. It’s What Inside That Counts: The development of an LED light engine requires the utmost attention to detail. Many brands of LEDs exist, and many of them make claims of top-tier performance and thermal stability. However, LED performance can only be established when an LED has been integrated, tested and deployed using sound thermal management and electrical control. Generic 175w Metal halide post top In an effort to manage glare, our secondary reflector materials have been carefully selected to control and diffuse the concentrated light levels emitted from our LED sources. Designed For LED: Each luminaire available with an LED source has been carefully designed to maximize the luminaire efficiency and to achieve optical supremacy. Although each luminaire differs aesthetically, the necessary balance between LED thermal dynamics, source positioning and optical geometry has been maintained in each design. Beacon’s LED Design Center: Starting with Beacon’s LED Design Center assures the ability to fully integrate thermal management systems with peripheral components, including optics, power sources, connections, and control systems. The optical design of Beacon’s High Power LED fixture defines the many options of specified beam pattern and preferred emitters. One of the most important elements to the design of High Power LED lighting fixtures is the thermal management. The design process is to develop a system that dissipates the heat off the die that is creating all the light. Too much heat on the die greatly affects the overall performance and life of the fixture. The slightest oversight in the thermal design will have an extremely noticeable effect on the light color and intensity and will greatly decrease the life of the LED. Beacon’s LED Design Center Evaluates Performance Trade-Offs: • • • • • Life Vs. Lumen Output Efficiency Vs. Lumen Output Aesthetics Vs. Performance LED Junction Temperature Vs. Drive Current LED Junction Temperature Vs. Thermal Performance / Life Lighting For Public Spaces with ‘LED Light Engines’ Designed for: • • • • • • • • • General Outdoor Illumination Street Lighting Pathway Lighting Parking Lot Lighting Marina Lighting Residential Outdoor Lighting Planned Communities Mixed Use Recreational Trails Village Town Centers Design Indirect Reflector • • Re-focuses the concentrated light emitted from each LED layer at the high angles required for area lighting Satin finish diffuses the lamp image brightness and increases uniformity on the ground LED array • • • • • Efficiently produces light up to 100 lumens per watt Available in 6000K and 4500K color temperatures 120V - 277V voltage sensing driver 50,000 hour life 5 year light engine and driver limited warranty .1 .2 .5 1 2 .1 .2 .5 MH = 12.00Ft BEACON PRODUCTS TRE31-LED18-IND3 PROJECT: tre3-kmled-18 TREVISO, TYPE III DISTRIBUTION, CUTOFF NICHIA 1WATT LED 18 LED'S MH = 12.00Ft Horizontal FootcandlesBEACON PRODUCTS Scale: 1 Inch = 10 Ft.TRE31-LED18-IND5 Light Loss Factor = 1.00PROJECT: tre5-kmled-18 Total Lumens Per Luminaire = 1260TREVISO, TYPE V DISTRIBUTION, CUTOFF Mounting Height = 10.00 FtNICHIA 1WATT LED Maximum Calculated Value = 3.16 Fc18 LED'S Arrangement: Single Type III & V Distribution Photometric Toolbox Professional Edition (c) copyright 1995-2007 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Page 1 Photometric Toolbox Professional Edition (c) copyright 1995-2007 by Lighting Analysts, Inc. Calculations based on published IES Methods and recommendations. Results derived from content of manufacturers photometric file. Horizontal Footcandles Scale: 1 Inch = 10 Ft. Light Loss Factor = 1.00 Total Lumens Per Luminaire = 1260 Mounting Height = 10.00 Ft Maximum Calculated Value = 0.94 Fc Arrangement: Single Page 1 General Description ‘Village Style’ profile design minimizes wind load requirements. Fixture sides are optional, and are constructed of rugged cast aluminum ribs. The LED light engine is mounted on a heavy gauge, cast aluminum heat sink that is enclosed in a sealed optical chamber. Light is projected into a high efficiency, patent pending reflector system that provides the optimum distribution of light on the ground area that it is intended to light. Optical options are available to reduce ‘light trespass’ on adjacent property. Modular design accommodates varied lighting output from high brightness, white, 6000K, minimum 82 CRI, long life LED sources are standard. 4500K LED sources are optionally available. The LED light engine and optical system are sealed in a chamber designed to meet IP66 requirements. This will give a dirt free, bug-free environment between normal servicing operations. LED drivers have power factor >92% and THD <20% of full load. The LED driver is sealed in a weather-tight housing and accommodates supply voltages 100-277V 50/60 Hz. LED driver shall be UL1310 / UL 48 Class 2 compliant. LED driver shall have a rated life of 100,000 hours. Labels / Specifications Underwriters Laboratories Listed in the U.S. and Canada for wet locations and enclosure designed to meet IP66 requirements. • • • • • • • • • • Village Styled Fixtures Clear Polycarbonate Lenses Modular Design For Varied Appearance Sealed Optical Chamber 24 Watt and 48 Watt LED light engine available. 1760 Lumen and 3550 Lumen packages available 6000K Standard, 4500K is optionally available Power Supply rated for 50,000 Hr Life 5-Year Limited Warranty Type V and Type III distributions available The LED Village2 Collection is made up of fully interchangeable components. Select a TOP to go with the Clear Polycarbonate LENS, followed by a CAGE, and finally a HOUSING. In total, you have 4 TOPS, 1 LENS, 4 CAGES, and 5 HOUSINGS, this gives you hundreds of unique and distinctive luminaires. Village2 Collection SELECT A TOP T1 SELECT A LENS (PC) Polycarbonate Clear SELECT A CAGE C1 SELECT A HOUSING H1 T2 T3 T4 C2 C3 C4 H2 H3 H4 H5 Light Sources - Volt (24LED) 24W, 120-277 VAC (48LED) 48W, 120-277 VAC Optical Options (IND3) Asymmetrical Indirect (IND5) Symmetrical Lighting Electrical Options (LSP) Lightening Surge Protection Mediterranean London Monaco Park Lane Beacon Products LLC has in the past offered 4 unique configurations. These luminaires were called Mediterranean, London, Monaco, and Park Lane. By specifying these new interchangeable components, you can still achieve the same look and style. For your reference, please find below the new catalogue number and current configuration. Color Options (BB) Black (BG) Green (BZ) Bronze (BW) White (BY) Gray (RAL) RAL #______ (PRE) Premium Colors & Finishes* *Consult factory Mediterranean London Monaco Park Lane T1 Top T2 Top T3 Top T4 Top PC Lens PC Lens PC Lens PC Lens C1 Cage C2 Cage C3 Cage C4 Cage H1 Housing H3 Housing H3 Housing H4 Housing 24LED-120 Source - Volt 24LED-120 Source - Volt 24LED-120 Source - Volt 24LED-120 Source - Volt IND5 Optical IND5 Optical IND5 Optical IND5 Optical LSP Electrical LSP Electrical LSP Electrical LSP Electrical BB Color BB Color BB Color BB Color Beacon Products, LLC 2041 58th Avenue Circle East Bradenton, Florida 34203 Mediterranean Phone: 941.755.6694 Fax: 941.751.5535 www.beaconproducts.com London Monaco LED Street Lights by Beacon Products • • • • • • • • • • • • Up To 5 Times Life Vs. HID Sources 50,000 Hour-Rated Life Low Energy Consumption Better Color Rendition & Nighttime Visibility No Warm-Up Or Cold Start Problems Std. 120--277 VAC Input. Consult factory for other voltages Significant Operational Savings - Energy & Maintenance Environmental Impact - Eliminate Hazardous Disposal Dark Sky Compliant LEED Compliant (LZ2, 3, 4) Surge Protection Against Lightning Outperforms Others And Uses 2/3 Less Energy Park Lane
© Copyright 2024 Paperzz